Prof. Albert Albers Magali Hauser

Univ.-Prof. Dr.-Ing. Dr. h. c. Albert Albers

Univ.-Prof. Dr.-Ing. Dr. h. c. Albert Albers

Profile

Univ.-Prof. Dr.-Ing. Dr. h. c. Albert Albers was born in 1957 and has been Professor and Head of IPEK – Institute of Product Engineering at the Karlsruhe Institute of Technology since 1996. He obtained his doctorate degree in 1987 under Prof. Paland at the Institute of Machine Elements and Engineering Design. Before Prof. Albers started his position in Karlsruhe he served as Head of the Development Department and as deputy member of the Executive Board. He is a founding member and chairman of the Scientific Association for Product Engineering (WiGeP) and a member of the National Academy of Science and Engineering (acatech). Since 2008 he is president of the Allgemeiner Fakultätentag (AFT e. V.), the German General Faculty Association. From 2012 to 2015 Prof. Albers was the spokesman and review board member of the DFG Review-Board 402 (Mechanics and Constructive Mechanical Engineering). Along with his commitment to the Association of German Engineers, he serves on Advisory Boards of a number of companies. For his excellent accomplishments and expertise in science, research and education in technical and scientific areas, he and the IPEK-Team received the Honorary Award 2016 of the Schaeffler FAG Foundation.

Research

Prof. Albers’ fundamental research philosophy is the simultaneous research on methods and processes of product engineering combined with the research on synthesis and validation of new technical systems whilst taking into account the significant role of the engineer within the product development process. Only this combination of research on systems, methods and processes enables a validation of the new development methods and processes immediately during projects of system research and to ensure their added value in practice.

Prof. Albers’ and his team investigate methods to analyze future market requirements and the innovation process of new product generations in the following research areas:

  • development and innovation management
  • product generation engineering
  • lightweight
  • methods of embodiment design
  • validation and NVH of technical systems
  • drive systems and mobility
  • tribological systems
  • clutches and brakes in drive systems

This research portfolio is embraced by three common and essential frameworks which are based on Systems Theory: iPeM – Integrated-Product-engineering-Model, IPEK-X-in-the-Loop-Approach to validate mechatronic systems and PGE – Product Generation Engineering.

Prof. Albers principle to combine high scientific quality and relevance for the application of research results in the industry led to various successful projects and publications. Namely he is the author of more than 1.000 articles in journals, books and proceedings since 1996 with an h-index (Google) of 22. Hence Prof. Albers belongs to the leading 5 % of scientists in the field of product engineering. These achievements are based on three special research fields of the DFG (German research funding organization), more than 25 successful individual proposals, as well as numerous research projects in basic research and applied research in cooperation with industry. Moreover, he served as supervisor of 111 dissertations und further 40 in progress.

Current Functions

Since 2020 Member of the Advisory Board VDI-GPP FB7 Product Development and Mechatronics
Since 2020 Member of the expert committee VDI/VDE-GMA 7.10 „Planung und Entwicklung hybrider Leistungsbündel“ (Planning and development of hybrid service bundles)
Since 2020 Deputy spokesman of acatech – National Academy of Science and Engineering
Since 2019

Member of the National Platform Future of Mobility (NPM)

Working Group 2: Alternative Propulsion Systems and Fuels for Sustainable Mobility
Since 2018 Member of the Advisory Board of Leichtbau BW GmbH: Agency for Lightweight Construction Baden-Wuerttemberg
Since 2018 Member of the Advisory Board of twopillars
Since 2015 Executive director of the KCT – KIT Campus Transfer GmbH
Since 2015 Member of the Advisory Board of the Design Society
Since 2009

Member of the Advisory Board of Brand Group, Anröchte (Germany)

Since 2009

Member of the Advisory Board of the University of Applied Sciences Kaiserslautern

Since 2009 Curator of the Offenburg University of Applied Sciences
Since 2009

Expert for AiF (German Federation of Industrial Research Associations)

Since 2008 President of the Allgemeiner Fakultätentag AFT e. V., the German General Faculty Association
Since 1996

Professor for Mechanical Design and Product Engineering as well as

Head of IPEK – Institute for Product Engineering at Karlsruhe Institute of Technology (KIT)

Functions and Memberships

10/1986 - 12/1988

Position as Senior Engineer at the Institute of Machine Elements and Engineering Design at the University of Hannover

04/1987 - 12/1988

Member of the Academic Council

Since 01/1996

Professor for Mechanical Design and Product Engineering as well as Head of IPEK – Institute for Product Engineering at Karlsruhe Institute of Technology (KIT)

1998 - 2004

Deputy Head of Institute of Ceramics in Mechanical Engineering at the University of Karlsruhe

Since 2003 Member of the Gesellschaft ür Tribologie e.V.

2006 - 2014

Member of the Advisory Board of Freudenberg New Technology SE & Co

Since 2006

Member of the American Society of Mechanical Engineers (ASME)

Since 2008

President of the Allgemeiner Fakultätentag AFT e. V., the German General Faculty Association

Since 2009

Member of the Advisory Board of Brand Group, Anröchte (Germany)

Since 2009 Expert for AiF (German Federation of Industrial Research Associations)
Since 2009 Member of the Advisory Board of the University of Applied Sciences Kaiserslautern
Since 2009 Curator of the Offenburg University of Applied Sciences

Since 2011

Founding member and Chairman of the Scientific Association for Product Engineering (WiGeP)

2012 - 2015

Spokesman and Review Board Member of the DFG Review-Board 402 (Mechanics and Constructive Mechanical Engineering)

Since 2015 Member of the Advisory Board of the Design Society

Since 2015

Executive director of the KCT – KIT Campus Transfer GmbH

Since 2017

Deputy spokesman of acatech – National Academy of Science and Engineering

Since 2017

Member of the Advisory Board of Müthing GmbH

Since 2018

Member of the Advisory Board of Leichtbau BW GmbH: Agency for Lightweight Construction Baden-Wuerttemberg

Since 2018

Member of the Advisory Board of twopillars

Since 2019

Member of the National Platform Future of Mobility (NPM)Working Group 2: Alternative Propulsion Systems and Fuels for Sustainable Mobility

Education and Professional Career

09/1983

Studies in Mechanical Engineering, University of Hannover, Germany,
Graduation with distinction

11/1987

Doctoral degree in Mechanical Engineering (summa cum laude), University of Hannover, Germany (Prof. Dr.-Ing. E.-G. Paland)

01/1989 - 12/1995

Joined LuK GmbH & Co. OHG, Bühl (Germany), a leading manufacturer of clutch systems, torsional vibration dampers and gear systems in the automotive industry

Resigned in 1995 as Head of Product Development Department for clutch systems and torsional vibration dampers and deputy member of the executive board

2000

 

Honorary Doctorate of the Technical University Baku, Azerbaijan

Since 2005 Member of acatech – National Academy of Science and Engineering
Since 2005 Member of the Board of Trustees of Offenburg University

Since 2007

Visiting Professor at Chinese German Graduate School (CDHK) of Tongji University in Shanghai

Since 2008

Visiting Professor at Shanghai Jiao Tong University (SJTU)

2016

Schaeffler FAG Foundation Honorary Award 2016 for excellent accomplishments and expertise in science, research and education in technical and scientific areas

Important research projects

Since 2016

EU-Project S2S – Science2Society

Since 2016

EU-Project ALLIANCE

Since 2011

DFG SPP1551 – Optimization of tribological systems through specifically upstreaming the running-in phase for machining process using the example of friction bearings

2012 - 2015

BMBF IN² - From information to innovation

2001 - 2012

SFB 588 – Learning and cooperating humanoid robots

2000 - 2011

Spokesman of the DFG Collaborative Research Center 483 „High performance sliding and friction systems based on advanced ceramics“

2000 - 2011

SFB 499 – Development, production and quality assurance of primary shaping of microsystems from metallic and ceramic materials

Since 2015

GRK2078 – Integrated engineering of continuous-discontinuous long fiber reinforced polymer structures (CoDiCoFRP)

Patents

DE-4433467-C2 Torsionsschwingungsdämpfer
DE-19631725-A1 Mechanische Sicherung für Bauteile
DE-10222973-A1 Zugmittel in CVT-Getrieben
DE-19522718-A1 Im Zusammenhang mit einer Reibungskupplung wirksame Drehmomentübertragungseinrichtung
DE-4214655-A1 Wälzlager
DE-4420934-A1 Drehmomentübertragungseinrichtung
DE-4121016-A1 Vorrichtung zur Kupplungsbetätigung
DE-4406826-A1 Schraubenfeder
DE-4420592-A1 Deckel für eine Reibungskupplung
DE-102011113468-A9 Batterie und Verwendung einer Kontaktvorrichtung
DE-4206921-B4 Einrichtung zum Dämpfen von Drehschwingungen
DE-102011113467-A1 Elektrischer Ableiter, elektrische Speicherzelle und elektrische Batterie
DE-10006284-A1 Schaltbare Reibungskupplung
US-5681221-A Torsional vibration damper
GB-2315316-A Torque transfer apparatus
GB-2312945-B Torque transfer device

Top 10 Publications


Maneuver-Based Analysis of Starting-Systems and Starting-Strategies for the Internal Combustion Engine in Full Hybrid Electric Vehicles
Albers, A.; Behrendt, M.; Henschel, J.; Holzer, H.; Matros, K.; Bohne, W.
2015. SAE International journal of alternative powertrains, 4 (1), 58–66. doi:10.4271/2014-01-2901
The Connected Car - A system-of-systems: Exploration of challenges in development from experts view
Albers, A.; Kurrle, A.; Klingler, S.
2016. 16. Internationales Stuttgarter Symposium Automobil- und Motorentechnik, Stuttgart, 15.- 16. März 2016. Hrsg.: M. Bargende, 1439–1450, Springer Verlag
Methods for Measuring, Analyzing and Predicting the Dynamic Torque of an Electric Drive Used in an Automotive Drivetrain
Albers, A.; Fischer, J.; Behrendt, M.; Lieske, D.
2015. SAE International journal of alternative powertrains, 4 (2), 363–369. doi:10.4271/2015-01-2363
Verifikation und Validierung im Produktentstehungsprozess
Albers, A.; Behrendt, M.; Klingler, S.; Matros, K.
2016. Handbuch Produktentwicklung. Hrsg.: Udo Lindemann, 541–569, Carl Hanser Verlag
Method recommendation and application in agile product development processes
Reiß, N.; Bursac, N.; Albers, A.; Walter, B.; Gladysz, B.
2016. 14th International Design Conference, DESIGN 2016, Cavtat, Dubrovnik, Croatia, 16 - 19 May, 2016, 401–410, The Design Society
15 years of SPALTEN problem solving methodology in product development
Albers, A.; Reiß, N.; Bursac, N.; Breitschuh, J.
2016. 12th Biennial Norddesign 2016 Conference "Highlighting the Nordic Approach", NordDesign 2016; Norwegian University of Science and Technology (NTNU)Trondheim; Norway; 10 August 2016 through 12 August 2016. Volume 1. Ed. : M. Steinert, 411–420, The Design Society
IPeM-Integrated Product Engineering Model in Context of Product Generation Engineering
Albers, A.; Reiss, N.; Bursac, N.; Richter, T.
2016. Procedia CIRP, 50, 100–105. doi:10.1016/j.procir.2016.04.168
Product Generation Development - Importance and Challenges from a Design Research Perspective
Albers, A.; Bursac, N.; Wintergerst, E.
2015. New developments in mechanics and mechanical engineering : proceedings of the International Conference on Mechanical Engineering (ME 2015), Vienna, Austria, March 15-17, 2015 : proceedings of the International Conference on Theoretical Mechanics and Applied Mechanics (TMAM 2015) Vienna, Austria, March, 15-17, 2015. Ed.: N.E Mastorakis, 16–21, s.l
The Contact and Channel Approach (C&C2-A) - relating a system’s physical structure to its functionality
Albers, A.; Sadowski, E.
2014. An Anthology of Theories and Models of Design : Philosophy, Approaches and Empirical Explorations. Ed.: A. Chakrabarti, 151–171, Springer Verlag. doi:10.1007/978-1-4471-6338-1_8
The "Karlsruhe model" - a successful approach to an academic education in industrial product development
Albers, A.; Burkardt, N.; Matthiesen, S.; Schweinberger, D.
2000. 3rd Workshop on Global Engineering Education - GEE’ 3, 18. - 20. Oktober, 200, Aachen, Germany, 8 S., Aachen

Important Publications of the Last 30 Years


2018
20 Years of Co-creation Using Case Based Learning : An Integrated Approach for Teaching Innovation and Research in Product Generation Engineering
Albers, A.; Bursac, N.; Heimicke, J.; Walter, B.; Reiß, N.
2018. Teaching and Learning in a Digital World : Proceedings of the 20th International Conference on Interactive Collaborative Learning, Volume 2, Budapest, Hungary, 27th - 29th September 2017. Ed.: M. E. Auer, 636–647, Springer. doi:10.1007/978-3-319-73204-6_69
2017
XiL-BW-e – Laboratory Network Baden-Württemberg for Electric Mobility
Albers, A.; Dietmayer, K.; Bargende, M.; Behrendt, M.; Yan, S.; Buchholz, M.; Zaiser, S.; Rößler, A.; Bernthaler, T.
2017. The 30th International Electric Vehicle Symposium & Exhibition, Stuttgart, October 9-11, 2017
Validation of a Cooling System for Temperature Conditioning of Cylindrical Battery Cells
Eisele, M.; Kohler, K.; Prinz, F.; Ott, S.
2017. 30th International Electric Vehicle Symposium (EVS30), Stuttgart, Germany, 9 - 11 October 2017. Bd.: 2, 933–945, Curran
Extended target weighing approach : Identification of lightweight design potential for new product generations
Albers, A.; Revfi, S.; Spadinger, M.
2017. Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 4 : Design Methods and Tools, Vancouver, Canada, 21st - 25th August 2017. Ed.: A. Maier, 367–376, The Design Society
Validation environment for function development and coverage of ADAS in the car development process
Albers, A.; Lutz, S.; Behrendt, M.; Düser, T.; Hettel, R.
2017. 17. Internationales Stuttgarter Symposium : Automobil- und Motorentechnik, Stuttgart, 14.-15. März 2017. Ed.: M. Bargende, 311–322, Vieweg Verlag. doi:10.1007/978-3-658-16988-6_87
Coupling of Computer-aided Methods : Supporting Product Developer during Embodiment Synthesis
Albers, A.; Spadinger, M.; Serf, M.; Reichert, S.; Heldmaier, S.; Schulz, M.
2017. WCSMO 12 : Proceedings of the 12th World Congress on Structural and Multidisciplinary Optimisation, Braunschweig, Germany, 5-9 Juni 2017
Methode zur Kalibrierung des Kupplungssystems und Objektivierung des Wiederstartkomforts hybrider Antriebsstränge auf dem Akustikrollenprüfstand
Albers, A.; Schille, F.; Wysocki, T.; Behrendt, M.; Birkhold, J.-M.; Cortès, S.
2017. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2017 : 2. VDI-Fachkonferenz Schwingungsreduzierung in mobilen Systemen 2017. Hrsg.: VDI Wissensforum GmbH, 399 – 416, VDI Verlag. doi:10.51202/9783181023099-399
Neue Ansätze zur quantitativen Charakterisierung von Zweimassenschwungrädern auf hochdynamischen Komponentenprüfständen
Albers, A.; Berger, J.; Boog, S.
2017. 2. VDI-Fachkonferenz Schwingungsreduzierung in mobilen Systemen 2017 : Kupplungen und Kupplungssysteme in Antrieben, Ettlingen, Germany, 17-18 May 2017, 135–145, VDI Verlag
Agile product engineering through continuous validation in PGE - Product Generation Engineering
Albers, A.; Behrendt, M.; Klingler, S.; Reiss, N.; Bursac, N.
2017. Design science, 3 (5), 19. doi:10.1017/dsj.2017.5
The development of electric drive systems : How to deal with the challenges
Albers, A.; Bause, K.; Reichert, U.; Ott, S.
2017. EVS30 : The 30th International Electric Vehicle Symposium & Exhibition, Stuttgart, Germany, 9-11 October 2017
Die Frühe Phase der PGE - Produktgenerationsentwicklung
Albers, A.; Rapp, S.; Birk, C.; Bursac, N.
2017. 4. Stuttgarter Symposium für Produktentwicklung 2017 (SSP) : Produktentwicklung im disruptiven Umfeld, Stuttgart, Deutschland, 28-29 Juni 2017, Fraunhofer Verlag
Frontloading in der Produktentwicklung von Power-Tools durch frühe Validierung mit Hilfe von leistungsskalierten Prototypen
Matthiesen, S.; Gwosch, T.; Mangold, S.; Grauberger, P.; Steck, M.; Cersowsky, S.
2017. Stuttgarter Symposium für Produktentwicklung 2017 (SSP 2017) : Produktentwicklung im disruptiven Umfeld, Stuttgart, Deutschland, 29. Juni 2017
PGE – Produktgenerationsentwicklung am Beispiel des Zweimassenschwungrads
Albers, A.; Bursac, N.; Rapp, S.
2017. Forschung im Ingenieurwesen, 81 (1), 13–31. doi:10.1007/s10010-016-0210-0
2016
Effiziente Validierung des Fahrzeuginnegeräuschs von Elektrofahrzeugen am Beispiel des Phänomens Torsionsheulen
Behrendt, M.; Albers, A.; Fischer, J.; Lieske, D.
2016. 8. E-MOTIVE - Expertenforum für elektrische Antriebe, Schweinfurt, 07.-09. September 2016
Empirical Study on Sensor and Actuator Systems of Validation Setups: Descriptive Models, Application and Analysis
Pinner, T.; Klingler, S.; Albers, A.
2016. 11. International Symposium on Tools and Methods of Competitive Engineering TMCE 2016, Aix-en-Provence, France, 09. - 13. May, 2016, University of Technology
Validierung 4.0 - Verteilte Systemvalidierung am Beidpiel der Antriebstrangentwicklung
Albers, A.; Yan, S.; Klingler, S.; Ott, S.; Behrendt, M.; Disch, C.; Heinz, A.; Jäger, B.; Düser, T.
2016. 18. Kongress SIMVEC - Simulation und Erprobung in der Fahrzeugentwicklung 2016: Berechnung, Prüfstands- und Straßenversuch, Baden-Baden, 22. - 23. November, 2016, 819–832, VDI Verlag
The Connected Car - A system-of-systems: Exploration of challenges in development from experts view
Albers, A.; Kurrle, A.; Klingler, S.
2016. 16. Internationales Stuttgarter Symposium Automobil- und Motorentechnik, Stuttgart, 15.- 16. März 2016. Hrsg.: M. Bargende, 1439–1450, Springer Verlag
ProVIL - Produktentwicklung im virtuellen Ideenlabor
Albers, A.; Bursac, N.; Walter, B.; Hahn, C.; Schröder, J.
2016. Entwerfen, Entwickeln, Erleben : Werkzeuge und Methoden in Produktionsentwicklung und Design - Dresden, 30. Juni - 1. Juli 2016. Hrsg.: R. Stelzer, 185–198, TUDpress
Verifikation und Validierung im Produktentstehungsprozess
Albers, A.; Behrendt, M.; Klingler, S.; Matros, K.
2016. Handbuch Produktentwicklung. Hrsg.: Udo Lindemann, 541–569, Carl Hanser Verlag
Method for Measuring and Analyzing Transient Powertrain Vibrations of Hybrid Electric Vehicles on an Acoustic Roller Test Bench
Albers, A.; Schille, F.; Behrendt, M.
2016. 9th International Styrian Noise, Vibration and Harshness Congress: The European Automotive Noise Conference, ISNVH 2016, Grazer Congress Sparkassenplatz 1 Graz, Austria, 22 - 24 June, 2016. doi:10.4271/2016-01-1835
Got the power? - A new method for a quick determination of the sound power using free-form measuring surfaces
Albers, A.; Behrendt, M.; Landes, D.; Hettel, R.; Fischer, J.
2016. 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, INTER-NOISE 2016; Hamburg; Germany; 21 August 2016 through 24 August 2016. Ed. : W. Kropp, 5955–5961, German Acoustical Society
15 years of SPALTEN problem solving methodology in product development
Albers, A.; Reiß, N.; Bursac, N.; Breitschuh, J.
2016. 12th Biennial Norddesign 2016 Conference "Highlighting the Nordic Approach", NordDesign 2016; Norwegian University of Science and Technology (NTNU)Trondheim; Norway; 10 August 2016 through 12 August 2016. Volume 1. Ed. : M. Steinert, 411–420, The Design Society
IPeM-Integrated Product Engineering Model in Context of Product Generation Engineering
Albers, A.; Reiss, N.; Bursac, N.; Richter, T.
2016. Procedia CIRP, 50, 100–105. doi:10.1016/j.procir.2016.04.168
2015
Audio-visuelle Simulation der Fahrzeugvorbeifahrt unter Nutzung von VR und Prüfstandsmessungen
Husung, S.; Siegel, A.; Weber, C.; Müller, B.; Behrendt, M.; Landes, D.; Albers, A.
2015. Wissenschafts- und Industrieforum Intelligente Technische Systeme 2015, 23. – 24. April 2015, Paderborn. Wirtschaft und Wissenschaft auf dem Weg zu Industrie 4.0, Heinz Nixdorf Institut
Operation Strategies for Plug-in Hybrid Electric Vehicles to reduce fuel consumption and emissions by means of Hybrid-Powertrain-in-the-Loop-Potentials
Albers, A.; Matros, K.; Behrendt, M.; Holzer, H.; Bohne, W.; Jachnik, T.; Horst, T.
2015. FISITA 2014, 35th World Automotive Congress, Maastricht, NL, Jun 2-6, 2014. Vol.: 5, 3807–3814, Curran
Maneuver-Based Analysis of Starting-Systems and Starting-Strategies for the Internal Combustion Engine in Full Hybrid Electric Vehicles
Albers, A.; Behrendt, M.; Henschel, J.; Holzer, H.; Matros, K.; Bohne, W.
2015. SAE International journal of alternative powertrains, 4 (1), 58–66. doi:10.4271/2014-01-2901
Ein Beitrag zur Beschreibung und Kategorisierung von Validierungsaktivitäten
Albers, A.; Klingler, S.; Pinner, T.; Behrendt, M.
2015. Stuttgarter Symposium für Produktentwicklung, Stuttgart, 19. Juni 2015. Ed.: H. Binz, CD-ROM + Heft, Fraunhofer Verlag
Methods for Measuring, Analyzing and Predicting the Dynamic Torque of an Electric Drive Used in an Automotive Drivetrain
Albers, A.; Fischer, J.; Behrendt, M.; Lieske, D.
2015. SAE International journal of alternative powertrains, 4 (2), 363–369. doi:10.4271/2015-01-2363
Produktgenerationsentwicklung - Bedeutung und Herausforderungen aus einer entwicklungsmethodischen Perspektive
Albers, A.; Nikola, B.; Wintergerst, E.
2015. Stuttgarter Symposium für Produktentwicklung (SSP) : Stuttgart, 19. Juni 2015 ; Hrsg.: H. Binz, 1–10, Fraunhofer Verlag
System Oriented Lightweight Design - a Holistic Approach to Innovation
Albers, A.; Burkardt, N.; Spadinger, M.
2015. The 3rd International Conference Mechanical Engineering in XXI Century, Niš, September 17 - 18, 2015 / University of Niš, Faculty of Mechanical Engineering. Ed.: D. Milc̆ić, 7–12, Faculty of Mechanical Engineering
Efficient, function-integrating shifting components for EV
Albers, A.; Bause, K.; Behrendt, M.; Puls, R.
2015. 14. Internationales CTI Symposium: hofer powertrain auf der Transmission Expo, Berlin, 08.12.2015
Optical analysis and measurement-based determination of spring behavior in clutch disc damper systems during dynamic operation
Albers, A.; Boog, S.; Koch, C.; Müller, O.; Ott, S.
2015. Drivetrain for vehicles 2015 : Transmissions in commercial vehicles [u.a.], Friedrichshafen, June 16 - 17, 2015. [International VDI Congress Drivetrain for Vehicles 2015], 679–700, VDI Verlag
Determination of acoustic contributions of car components to the far field using transfer functions
Albers, A.; Landes, D.; Behrendt, M.; Weber, C.; Siegel, A.; Husung, S.
2015. Automobil- und Motorentechnik : 17th and 18th March 2015, Stuttgart / 15. Internationales Stuttgarter Symposium. Hrsg.: M. Bargende, 1323–1334, Springer Verlag. doi:10.1007/978-3-658-08844-6_92
Manöverbasierte Validierung von Hybridantrieben
Albers, A.; Schille, F.; Behrendt, M.; Matros, K.; Holzer, H.
2015. ATZ - Automobiltechnische Zeitschrift, 117 (2), 64–71. doi:10.1007/s35148-015-0384-z
2014
Supporting Globally Distributed Product Development with a New Validation Concept
Albers, A.; You, Y.; Klingler, S.; Behrendt, M.; Zhang, T.; Song, K.
2014. Procedia CIRP, 21, 461–466. doi:10.1016/j.procir.2014.03.142
Darstellung und Bewertung von Hybridantrieben mit einem Hybrid-Erlebnis-Prototypen
Matros, K.; Albers, A.; Behrendt, M.; Holzer, H.; Bohne, W.; Ars, H.
2014. Tagungsdokumentation / Simulation und Test für den Antriebsstrang, VPC.plus, 16. MTZ-Fachtagung Virtual Powertrain Creation, Hanau, 30. September - 1. Oktober 2014, 1–17, ATZlive
Method for Measuring and Analyzing the Transfer Path of Acoustic Phenomena into the Driver Cabin of a Battery Electric Vehicle
Albers, A.; Fischer, J.; Landes, D.; Behrendt, M.
2014. SAE International journal of engines, 7 (3), 1585–1592. doi:10.4271/2014-01-2071
Messung und Interpretation der Wirkkette eines akustischen Phänomens im Antriebsstrang eines Elektrofahrzeugs
Albers, A.; Fischer, J.; Behrendt, M.; Lieske, D.
2014. Automobiltechnische Zeitschrift, (3), 68–75
Development of Hybrid-Powertrains by Means of X-in-the-Loop-Approach
Albers, A.; Behrendt, M.; Matros, K.; Holzer, H.; Bohne, W.
2014. ATZ-Elektronik, 9 (2)
Prioritization of Validation Activities in Product Development Processes
Albers, A.; Klingler, S.; Wagner, D.
2014. 13th International Design Conference, DESIGN 2014; Dubrovnik; Croatia; 19 May 2014 through 22 May 2014. Ed. : D. Marjanovic, 81–90, Faculty of Mechanical Engineering and Naval Architecture
2013
Ohne Lenken in die Kurve - Virtuelle Kurvenfahrt auf dem 4x2 Rollenprüfstand
Albers, A.; Hettel, R.; Behrendt, M.; Düser, T.
2013. Proceedings. 5. Internationales Symposium für Entwicklungsmethodik, 22. und 23. Oktober 2013, Wiesbaden, 68–79, VKM
Validation of Vehicle Drive Systems with Real-Time Simulation on High-Dynamic Test Benches
Albers, A.; Geier, M.; Jaeger, S.; Stier, C.
2013. ASME 2013 Verification and Validation Symposium (VV), Las Vegas, Nevada, May 22-24, 2013
Method for scaling the indoor Pass-by noise testing on a roller test bench in a small anechoic chamber
Behrendt, M.; Robens, G.; Albers, A.
2013. Journal of Basic and Applied Physics, 2 (5), 29–35
Validierung von Fahrzeug-Antriebssystemen mit hochdynamischen Prüfständen
Albers, A.; Stier, C.; Babik, A.; Geier, M.
2013. Systemanalyse in der Kfz-Antriebstechnik VII : dynamisches Gesamtsystemverhalten von Fahrzeugantrieben ; [9 Fachtagung Dynamisches Gesamtsystemverhalten von Fahrzeugantrieben am 19. März 2013 im Hotel Vierjahreszeiten in Starnberg]. Hrsg.: U. Brill, 132–137, expert-Verlag
A New Validation Concept for Globally Distributed Multidisciplinary Product Development
Albers, A.; You, Y.; Klingler, S.; Behrendt, M.; Zhang, T.; Song, K.
2013. Proceedings of 20th International Conference on Industrial Engineering and Engineering Management : Theory and Apply of Industrial Engineering, 231–242, Springer Verlag. doi:10.1007/978-3-642-40063-6_23
Schaltroboter schaltet im automatisierten Prüfstandbetrieb wie ein Mensch
Albers, A.; Pinner, T.
2013. Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, 2, 15–16
2012
Advanced systems engineering - Towards a model-based and human-centered methodology
Albers, A.; Lohmeyer, Q.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 407–416, Delft University of Technology (TU Delft)
Systematisch zu Mobilitätslösungen
Albers, A.; Behrendt, M.; Ott, S.
2012. Automobil-Konstruktion, 2012 (2), 38–39
2011
Phenomena-Based Methods in Powertrain Validation
Albers, A.; Brezger, F.; Geier, M.; Freudenmann, T.; Stier, C.
2011. 10th International Symposium and Exhibition, Innovative Automotive Transmissions and Hybrid & Electric Drives, Berlin, Germany, 5. – 8. December, 2011
Different notions of function: results from an experiment on the analysis of an existing product
Eckert, C.; Alink, T.; Ruckpaul, A.; Albers, A.
2011. Journal of Engineering Design, 22 (11-12), 811–837. doi:10.1080/09544828.2011.603297
Indoor Pass-by noise testing on a roller test bench in a small anechoic chamber
Albers, A.; Robens, G.
2011. Proceedings of Inter-Noise 2011: 40th International Congress and Exposition on Noise Control Engineering, Osaka, Japan, September 4-7, 2011, 1 DVD - Rom, Osaka
Experimentelle Analyse der Dämpfung in PKW-Antriebssträngen in Hinblick auf die Übertragung von Anfahrschwingungen
Albers, A.; Stier, C.
2011. Schwingungsdämpfung: 2. VDI-Fachtagung, Leonberg, 16. und 17. November 2011, 169–180, VDI Verlag
2010
Best-Practice für die Ingenieurpromotion - Die Assistenzpromotion am IPEK - Institut für Produktentwicklung
Albers, A.; Behrendt, M.; Sadowski, E.; Braun, A.
2010. Karlsruher Institut für Technologie (KIT)
The impact of peripheral components on gear development concerning investigation of comfort relevant manoeuvres
Albers, A.; Brezger, F.; Geier, M.
2010. Getriebe in Fahrzeugen 2010 - Internationaler VDI-Kongress Getriebe in Fahrzeugen 2010 - Kultur- und Congress-Centrum Graf-Zeppelin-Haus, Friedrichshafen, 22. und 23. Juni 2010, 487–502, VDI Fachmedien
Potenzialabschätzung mechatronischer Aktuatorik in Fahrzeugen mit alternativen Antriebssträngen
Albers, A.; Babik, A.; Brezger, F.
2010. Zusammenspiel von Maschinenbau, Elektronik und Software - der Weg zum Gesamtfahrzeug - 3. Grazer Symposium Virtuelles Fahrzeug, Graz, 6.-7. Mai 2010, Graz
Validation as knowledgebase for future mobility systems
Albers, A.; Ott, S.; Behrendt, M.; Merkel, P.; Geier, M.
2010. 9. Internationales CTI Symposium, Berlin, November 29 - December 2, 2010
Implementation of a Model Based Gear Rattle Analysis Method in a Full Vehicle System Simulation
Albers, A.; Geier, M.
2010. International Conference on Gears: Europe invites the world, Garching (near Munich), Germany, October 4th to 6th, 2010. Vol. 1, 237–242, VDI Verlag
Implementation of a Vehicle-in-the-Loop Development and Validation Platform
Albers A.; Düser, T.
2010. Automobiles and sustainable mobility: Proceedings of the FISITA 2010 World Automotive Congress, Budapest, Hungary, May 30 - June 4, 2010, 1 CD-Rom, Gépipari Tudományos Egyesület = Scientific Association for Mechanical Engineering (GTE)
2009
Simulationsgestützte Methoden – IDE und XiL zur Entwicklung von Antriebsstrangkomponenten
Geier, M.; Stier, C.; Düser, T.; Behrendt, M.; Ott, S.; Albers, A.
2009. ATZ extra, 22 (4), 48–53
Analyse des Drehzahleinflusses auf das dynamische Übertragungsverhalten von ZMS
Stier, C.; Geier, M.; Albers, A.
2009. Systemanalyse in der Kfz-Antriebstechnik - Bd. 5: Schwingungen im Getriebe und im Antriebsstrang - NVH-Optimierungen - Systemabstimmungen von Hybridfahrzeugen - Akustische Beurteilungen. Hrsg.: A. Laschet, 11–22, expert-Verlag
Integration of the Contact and Channel Model with Axiomatic Design
Marques, P. A.; Saraiva, P. M.; Requeijo, J. G.; Alink, T.; Albers, A.; Guerreiro, F. F.
2009. Proceedings of the fifth international conference on Axiomatic Design (ICAD 2009), Campus de caprica, 25. - 27. März, 2009, Institute of Axiomatic Design
Validation of powertrain systems on the example of real and virtual investigations of a dual mass flywheel in the X-in-the-Loop (XiL) environment
Albers, A.; Geier, M.; Merkel, P.; Ott, S.
2009. 8. Internationales CTI Symposium Innovative Fahrzeug-Getriebe, Berlin, 1. und 2. Dezember 2009, 13
2008
VCDM Virtual Clutch Development Model - Virtual Prototyping Approach Clarifies Clutch Related Phenomena
Albers, A.; Behrendt, M.; Ott, S.; Sjästrand, M.; Mahlin, B.
2008. Getriebe in Fahrzeugen 2008 (VDI Transmission in vehicles) : VDI-Tagung Friedrichshafen, 17. - 18. Juni 2008, 725–737, VDI Verlag
X-in-the-loop als integrierte Entwicklungsumgebung von komplexen Antriebsystemen
Albers, A.; Düser, T.; Ott, S.
2008. 8. Tagung Hardware-in-the-loop-Simulation, 16./17. September 2008, Kassel, Germany, Kassel
Support of system analyses and improvement in industrial design trough the C&CM
Albers, A.; Alink, T.; Matthiesen, S.; Thau, S.
2008. Proceedings of the DESIGN 2008 - 10th International Design Conference, 19 - 23 May, 2008, Dubrovnik, Croatia, 245–326, Dubrovnik
Werkzeug zur automatischen Parametrierung von künstlichen neuronalen Netzen zur modellbasierten Prüfstandsüberwachung auf Basis von MATLAB
Albers, A.; Seifermann, A.
2008. Vortrag beim Technologie-Seminar “Multidisziplinäre Forschung und Lehre mit der MathWorks Produktfamilie“, Karlsruhe, Germany, Universität Karlsruhe (TH)
Eine integrierte Entwicklungsumgebung für Antriebsstrangsysteme
Albers, A.; Geier, M.; Behrendt, M.; Ott, S.
2008. 7. Internationalen CTI Symposium Innovative Fahrzeug-Getriebe, 01. bis 05. Dezember 2008, Berlin, Germany, Berlin
Vehicle start-up simulation on drive train test bench and subjective comfort evaluation of virtual drive train by means of new driver modelling tools based on artificial neural networks
Albers, A.; Lerspalungsanti, S.; Ott, S.; Düser, T.
2008. Congress proceedings / FISITA World Automotive Congress, 14 - 19 September 2008, Munich, Germany, Springer Automotive Media
Links between subjective and objective evaluations regarding the steering character of automobiles
Albers, A.; Zschocke, A.
2008. International Journal of Automotive Technology, 9 (4), 473–481
2007
GEARE - Global Engineering Alliance for Researchand Education - a student exchange program to meet the needs of a global world
Albers, A.; Burkardt, N.; Hauser, S.
2007. International Conference on Design Education, the University of New South Wales, Sydney, 9 -12 July, 2007, University of NSW
Modellbasierte Antriebsstrangentwicklung : Durchgängige Werkzeugkette vom Entwurf bis zur Validierung
Albers, A.; Müller-Glaser, K.; Schyr, C.; Kühl, M.
2007. Automobiltechnische Zeitschrift, 109 (2), 134–139. doi:10.1007/BF03221865
Attempt of Prediction of Vehicle Longitudinal Dynamic Performance using Artificial Neural Networks (ANN)
Albers, A.; Ott, S.; Wang, J.
2007. Proceedings of the ASME IDETC: 9th International Conference on Advanced Vehicle and Tire Technologies (AVTT), 04.-07. September 2007, Las Vegas, Nevada, Las Vegas
2006
Methoden und Werkzeuge zur modellbasierten Validierung von Hybridantrieben
Albers, A.; Gschweitl, K.; Schyr, C.; Kunzfeld, S.
2006. Automobiltechnische Zeitschrift, 108 (11), 980–987. doi:10.1007/BF03221840
A tribological system measuring technique for the identification of nvh-relevant effects in the working surface pair of a vehicle clutch
Albers, A.; Ott, S.
2006. ICMT 2006 - International Conference on Mechanical Transmissions, 25. - 29. September, 2006, Chongqing, China, -, Chongqing
Methodical Powertrain Validation with Behavioural Mock Ups
Albers, A.; Düser, T.; Schyr, C.
2006. ICMT - International Conference on Mechanical Transmissions, 25. - 29. September, 2006, Chongqing, China, 25. - 29. September 2006, -, Chongqing
Systemtribometer zur Untersuchung hochbelasteter nasslaufender Friktionskontakte unter mehrachsigen Gleitbewegungen
Albers, A.; Behrendt, M.; Ott, S.
2006. Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen, 47. Tribologie-Fachtagung, 25. bis 27. September 2006 in Göttingen, Gesellschaft für Tribologie e.V. (GfT)
Ein neuer Ansatz zur Produktentwicklung basierend auf Systems Engineering und systematischer Problemlösung
Albers, A.; Nurkardt, N.; Meboldt, M.
2006. FDIBA - 15 Jahre Fakultät für deutsche Ingenieur- und Betriebswirtschaftsausbildung, 23. - 25. November, 2006, Sofia, Bulgaria, -, Sofia
2005
Model Based Verification of Automotive Powertrains
Albers, A.; Schyr, C.
2005. Proceedings of the 15th International Conference on Engineering Design ICED 05, August 15th-18th, 2005, Melbourne, Australia, Melbourne
SPALTEN Problem Solving Methodology in the Product Development
Albers, A.; Burkhardt, N.; Meboldt, M.; Saak, M.
2005. Engineering Design and the Global Economy: 15th International Conference on Engineering Design - ICED 2005, Melbourne, 15. - 18. August 2005. Hrsg.: A. Samuel, 90671, The Design Society
2004
Engineering Design in a different Way: Cognitive Perspective on the Contact & Channel Model Approach
Albers, A.; Eckert, C.; Ohmer, M.
2004. Visual and Spatial Reasoning in Design III. Preprints of the 3rd International Conference on Visual and Spatial Reasoning in Design, Massachusetts Institute of Technology, Cambridge, USA 22-23 July 2004. Ed. : J. S. Gero, 3–22, Key Centre of Design Computing and Cognition
Vernetzung von Steuergeräten an Antriebsstrang-Prüfständen
Albers, A.; Kühl, M.; Müller-Glaser, K.; Schyr, C.
2004. Automobiltechnische Zeitschrift, 106 (10), 934–941
Driver start-up comfort rating of automated clutch systems - an objectification using artificial neural networks
Albers, A.; Albrecht, M.
2004. FISITA 2004 World Automative Congress, Barcelona, Spain, 23 - 27 May 2004. Book of abstracts. Paper No. F2004U108., 325, Sociedad de Técnicos de Automoción
Holistic optimisation of lubricated friction contacts with 4-dimensional load collectives by multi-stage engineering
Albers, A.; Behrendt, M.; Stuffer, A.
2004. Tools and methods of competitive engineering : proceedings of the Fifth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2004, April 13 - 17, 2004, Lausanne, Switzerland. Ed.: I. Horváth, 8 S., Millpress
2003
Augmented Reality am dynamischen Leistungsprüfstand
Albers, A.; Schyr, C.
2003. Augmented & Virtual Reality in der Produktentstehung. Grundlagen, Methoden und Werkzeuge. 2. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, Paderborn, June 4-5, 2003. Ed.: J. Gausemeier, Heinz Nixdorf Insitut
New Approach Using Artificial Neural Networks for Modelling and Evaluation of Man-Machine-Interaction at the Start-Up Process in Passsenger Cars
Albers, A.; Albrecht, M.
2003. Research for Practice : Innovation in Products, Processes and Organisations. 14th International Conference on Engineering Design (ICED), Stockholm, Sweden, August 19th-21st 2003. Ed.: A. Folkeson, The Design Society
Evaluation of the element model "Working surface pairs & channel and support structures"
Albers, A.; Matthiesen, S.; Ohmer, M.
2003. International CIRP Design Seminar 2003 : Methods and Tools for Co-operative and Integrated Design, 12-14 May 2003, Grenoble, France 2003., Grenoble
Parallelstranggetriebe mit alternativen Schaltbaugruppen zur passiven Voreinstellung des jeweiligen Zielgangs
Albers, A.; Goetze, T.; Eibler, G.
2003. Tagungsband / Antriebstechnisches Kolloquium : Aachen, 27.-28. Mai 2003 ;Antriebstechnik in Windenergieanlagen, Simulation und Berechnung, Wälzlagerschmierung und Dichtung, Fahrzeugantriebe. Hrsg.: P.W. Gold, 371–392, Stercken
2002
Ermittlung des dynamischen Übertragungsverhaltens eines Zweimassenschwungrades
Albers, A.; Krüger, A.
2002. Konstruktion, 54 (5), 62–64
Gezielte Problemlösung bei der Produktentwicklung mit Hilfe der SPALTEN-Methode
Albers, A.; Saak, M.; Burkardt, N.
2002. 47. Internationales Wissenschaftliches Kolloquium, Ilmenau, Germany, 23-26. September 2002, Alb-02, TU
2001
Prüfen von Antriebssträngen am Beispiel des Kupplungsrupfens - Ganzheitliche Antriebsstrangentwicklung
Albers, A.; Krüger, A.; Lux, R.; Albrecht, M.
2001. Automobiltechnische Zeitschrift, 103 (1), 44–45
2000
Dynamiksimulation komplettiert Prüfstands- und Fahrversuche
Lux, R.; Krueger, A.; Albers, A.
2000. Simulation im Maschinenbau : Softwaretools und Anwendungen in Lehre, Forschung und Praxis; Dresdner Tagung (SIM 2000), 24. und 25. Februar, 2000 - Bd. 1, Eigenverl
1999
Maschinenbau im Informationszeitalter - Das Karlsruher Lehrmodell
Albers, A.; Matthiesen, S.
1999. Maschinenbau im Informationszeitalter : 44. Internationales Wissenschaftliches Kolloquium, 20. - 23.09.1999 - Bd. 3. Hrsg.: W. Gens, 568–575, Techn. Univ
1998
1995
Selbsteinstellende Kupplung (SAC) und Zweimassenschwungrad (ZMS) zur Verbesserung des Antriebsstrangkomforts
Albers, A.
1995. Getriebe in Fahrzeugen ’95 : Tagung Friedrichshafen, 26 und 27. April 1995, 153–168, VDI Verlag
1994
Simultaneous Engineering, Projektmanagement und Konstruktionsmethodik - Werkzeuge zur Effizienzsteigerung
Albers, A.
1994. Deutscher Konstrukteurtag - Entwicklung und Konstruktion im Strukturwandel, Fulda, Germany, 6.-7. Juni 1994, 73–106, VDI Verlag
Weiterentwicklungen beim ZMS - Geräuschkomfort für moderne Kraftfahrzeuge
Albers, A.
1994. 5. Internationales Kolloquium Torsionsschwingungen im Antriebsstrang, Baden Baden, 27. Mai 1994
1993
Confort acoustique des vehicules par l’utilisation d’un volant bimasse ou d’un DFC. Journees d’etude "progres recents en environnement et confort acoustiques des vehicules"
Albers, A.
1993. 2eme Section Technique de la Societe des Ingenieurs de l’Automobile S.I.A., 21. et 22. Janvier 1993, Paris, France, Paris
Simultaneous Engineering an einem Beispiel aus der Kraftfahrzeugzulieferindustrie
Albers, A.
1993. Total quality management, Simultaneous engineering, Lean development : Wege aus der Rezession; Führungskräfte-Treffen, München, 17.-18. Juni 1993, 5.1–5.27, VDI Verlag
1992
Das Schwingungsverhalten von Fahrzeugantriebssträngen
Albers, A.
1992. Vortrag auf den NVH- Training Kursen Level II, 14. Mai 1992 und 23. September 1992, Bildungszentrum der Ford-Werke, Köln, Germany, Köln
1991
Das Zweimassenschwungrad der dritten Generation zur Optimierung der Komforteigenschaften von PKW-Antriebssträngen - Modellbildung - Auslegung - Wirkung im Gesamttriebstrang
Albers, A.
1991. Maschinen- und Anlagenüberwachung, Komponenten der Antriebstechnik im System, Neu- und Weiterentwicklungen - Antriebstechnisches Kolloquium, Aachen, 1991, 245–268, Verl. TÜV Rheinland
Torsional Vibrations in Drive-Trains
Albers, A.
1991. Lecture to the Ford NVH-Course, 7th. Nov.1991, Burleigh Court, Loughborough University of Technology, Loughborough
1990
Elektronisches Kupplungsmanagement (EKM) - Die mitdenkende Kupplung
Albers, A.
1990. Torsionsschwingungen im Antriebsstrang : 4. Internationales Kolloquium am 20. April 1990 in Baden-Baden, 77–101, LuK

Publications


2024
Video 5
Petersen, M.; Albers, A.
2024. (M. Petersen, Ed.)
Video 4
Petersen, M.; Albers, A.
2024. (M. Petersen, Ed.)
Video 3
Petersen, M.; Albers, A.
2024. (M. Petersen, Ed.)
Video 2
Petersen, M.; Albers, A.
2024. (M. Petersen, Ed.)
Video 1
Petersen, M.; Albers, A.
2024. (M. Petersen, Ed.)
Sound 5
Petersen, M.; Albers, A.
2024. (M. Petersen, Ed.)
Sound 4
Petersen, M.; Albers, A.
2024. (M. Petersen, Ed.)
Sound 3
Petersen, M.; Albers, A.
2024. (M. Petersen, Ed.)
Sound 2
Petersen, M.; Albers, A.
2024. (M. Petersen, Ed.)
Sound 1
Petersen, M.; Albers, A.
2024. (M. Petersen, Ed.)
Influence of Agility on the Innovation Capability of Organizations - An Empirical Study
Schoeck, M.; Batora, M.; Mueller, J.; Bursac, N.; Albers, A.
2024. Volume 2: Advanced Design and Information Technologies - International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, 29th October – 2nd November 2023, The American Society of Mechanical Engineers (ASME). doi:10.1115/IMECE2023-113522
Thermally optimized designs for electro-hydrostatic actuators using surrogate models and topology optimization
Knecht, S.; Albers, A.
2024. AIAA SCITECH 2024 Forum, American Institute of Aeronautics and Astronautics. doi:10.2514/6.2024-0479
Investigating the potential of artificial intelligence for the employee from the perspective of AI-experts
Humpert, L.; Tihlarik, A.; Wäschle, M.; Anacker, H.; Dumitrescu, R.; Albers, A.; Albert, B.; Röbenack, S.; Pfeiffer, S.
2024. 2023 IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD), Rabat, 22nd - 24th November 2023, 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICTMOD59086.2023.10438118
A Reference Process Model for the Evolution of Product Portfolios
Wiederkehr, I.; Tissen, D.; Koldewey, C.; Dumitrescu, R.; Schlegel, M.; Albers, A.
2024. 2023 IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD), Rabat, 22nd - 24th November 2023, 1–5, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICTMOD59086.2023.10438169
Reference Architecture for Metadata Management - A Case Study on Data Mining in the Development of Cyber-Physical Systems
Wagenmann, S.; Krause, A.; Rall, J.; Kaeske, J.; Schoeck, M.; Bursac, N.; Albers, A.
2024. 2023 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapur, 18th-21st December 2023, 1057 – 1061, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IEEM58616.2023.10406413
Success Factors and Barriers in Industry-Academia Collaborations - A Descriptive Model
Kempf, C.; Albers, A.; Hellwig, I.; Bastian, A.; Ritzer, K.
2024. Volume 2: Advanced Design and Information Technologies, The American Society of Mechanical Engineers (ASME). doi:10.1115/IMECE2023-112574
Automatisierte Auslegung von Brennstoffzellenantriebssystemen
Braumandl, A.; Brause, K.; Albers, A.
2024. 24. Internationaler VDI-Kongress "Dritev", 13 S., VDI Verlag
Model‐based analysis and specification of functional requirements and tests for complex automotive systems
Wiecher, C.; Mandel, C.; Günther, M.; Fischbach, J.; Greenyer, J.; Greinert, M.; Wolff, C.; Dumitrescu, R.; Mendez, D.; Albers, A.
2024. Systems Engineering, 1–17. doi:10.1002/sys.21748
Evaluating an enhanced thermal response test (ETRT) with high groundwater flow
Albers, A.; Steger, H.; Zorn, R.; Blum, P.
2024. Geothermal Energy, 12 (1), 1. doi:10.1186/s40517-023-00278-y
2023
Analysis of the Integration of Monitoring Approaches Using Strategic Foresight in the Product Engineering Process
Thümmel, C.; Kleinschrot, M.; Schwarz, S. E.; Siebe, A.; Albers, A.
2023. Proceedings of the International Conference on Industrial Engineering and Operations Management, Melbourne, 14th-16th November 2023, IEOM Society International. doi:10.46254/AU02.20230077
Augmented Reality for Quality Inspection: A User-Centred Systematic Review of Use Cases, Trends and Technology
Albers, A.; Bohné, T.; Tadeja, S. K.
2023. 2023 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), Sydney, 16th-20th October 2023, 146 – 153, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISMAR-Adjunct60411.2023.00038
Glucocorticoid Nanoparticles Show Full Therapeutic Efficacy in a Mouse Model of Acute Lung Injury and Concomitantly Reduce Adverse Effects
Albers, G. J.; Amouret, A.; Ciupka, K.; Montes-Cobos, E.; Feldmann, C.; Reichardt, H. M.
2023. International Journal of Molecular Sciences, 24 (23), Art.-Nr.: 16843. doi:10.3390/ijms242316843
Weiterentwicklung und Evaluation einer Systematik zur Bestimmung sich ändernder Produkteigenschaften
Kuebler, M.; Thümmel, C.; Spekker, M.; Siebe, A.; Albers, A.
2023. Vorausschau und Technologieplanung, Berlin, 14.9.-15.9.2023, 301–318, Universität Paderborn. doi:10.17619/UNIPB/1-1821
Upgradeable Mechatronic Systems – Definition and Model of Upgrades in the Context of the Model of SGE - System Generation Engineering
Albers, A.; Düser, T.; Kuebler, M.; Schwarz, S. E.; Lickefett, M. S. M.; Pfaff, F.; Thümmel, C.
2023. Proceedings of the FISITA - Technology and Mobility Conference Europe 2023, Barcelona, 12th - 15th Semptember 2023, Fédération Internationale des Sociétés d’Ingénieurs des Techniques de l’Automobile (FISITA). doi:10.46720/fwc2023-sel-009
Identification of Fields of Action for the Integration and Validation of Future-Oriented Customer-Relevant Product Characteristics During the Product Engineering Process
Thümmel, C.; Eric Schwarz, S.; Ritzer, K.; Kuebler, M.; Siebe, A.; Albers, A.
2023. 6th European International Conference on Industrial Engineering and Operations Management, Lisbon, Portugal, 18th-20th July, 2023, 515–527, IEOM Society International. doi:10.46254/EU6.20230144
Method for Reference-Based Manufacturing Cost Estimation - Evaluation Study Using a Prototype
Hellweg, F.; Cacaj, A.; Haneke, S.; Albers, A.
2023. Proceedings of the Design Society, 3, 2625 – 2634. doi:10.1017/pds.2023.263
Modelling Technical Systems in the Early Phase: Proposing a Formal Definition for the System Concept
Albers, A.; Hünemeyer, S.; Kubin, A.; Pfaff, F.; Schlegel, M.; Rapp, S.
2023. Proceedings of the Design Society, 3, 2695 – 2704. doi:10.1017/pds.2023.270
Robust Product Design – Influencing Factors on Upgradeable Modular Products
Kübler, M. S.; Beck, F.; Glasmacher, B.; Rapp, S.; Albers, A.
2023. Proceedings of the Design Society, 3, 3115 – 3124. doi:10.1017/pds.2023.312
Linking Digital B2B Platform Business Models and Product Development: A Bibliometric Analysis and Literature Review
Brecht, P.; Hendriks, D.; Niever, M.; Hahn, C.; Pfaff, F.; Rapp, S.; Albers, A.
2023. Proceedings of the Design Society, 3, 2465 – 2474. doi:10.1017/pds.2023.247
Supporting Systems Engineering Activities by Artifact-Oriented Description and Selection of Methods
Ammersdörfer, T.; Inkermann, D.; Müller, J.; Mandel, C.; Albers, A.; Tekaat, J.; Schierbaum, A.; Anacker, H.; Bitzer, M.; Kleiner, S.; Herrmann, J.-P.; Krause, P.
2023. Proceedings of the Design Society, 3, 3245 – 3254. doi:10.1017/pds.2023.325
A Competence Portfolio for Future Leaders in Advanced Systems Engineering
Impertro, S.; Duehr, K.; Rust, H.; Albers, A.; Bursac, N.
2023. Proceedings of the Design Society, 3, 69 – 79. doi:10.1017/pds.2023.8
Evolutionary Perspective on System Generation Engineering by the Example of the iPhone
Pfaff, F.; Götz, G. T.; Rapp, S.; Albers, A.
2023. Proceedings of the Design Society, 3, 1715 – 1724. doi:10.1017/pds.2023.172
Descriptive Attributes of Analysis Use Cases in the Data-Driven Validation of Elements in the System of Objectives
Wagenmann, S.; Weidinger, F.; Schöck, M.; Albers, A.; Bursac, N.
2023. Proceedings of the Design Society, 3, 1207 – 1216. doi:10.1017/pds.2023.121
Improving Knowledge Transfers at Protektorwerk Florenz Maisch GmbH & Co. KG through the Application of the InKTI - Interdepartmental Knowledge Transfer Improvement Method
Klippert, M.; Schäfer, L.; Böllhoff, J.; Willerscheid, H.; Rapp, S.; Albers, A.
2023. 24th Proceedings of the Design Society, International Conference on Engineering Design (ICED), Bordeaux, France, 24.07. - 28.07.2023. Vol. 3, 2255–2264, Cambridge University Press (CUP). doi:10.1017/pds.2023.226
Utilising artificial intelligence to investigate the relevance of customer benefits
Braumandl, A.; Ponnraj, A.; Brückel, J.; Brause, K.; Albers, A.
2023. International Journal of Innovation Management, 27 (05). doi:10.1142/S1363919623400066
Stakeholder participation in Sprint Review in agile product development of mechatronic systems=Stakeholderbeteiligung im Sprint Review bei der agilen Produktentwicklung mechatronischer Systeme
Ankele, D.; Albers, A.; Bursac, N.; Ritzer, K.
2023. Stuttgarter Symposium für Produktentwicklung SSP, Stuttgart, May 2023, 223 – 234, Fraunhofer IAO
Stakeholder Needs in Systems Engineering: A Proposal for a Formal Definition
Kubin, A.; Wagenmann, S.; Reichert, F.; Mandel, C.; Albers, A.
2023. 2023 IEEE International Systems Conference (SysCon), Vancouver, Canada, 17-20 April 2023, 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SysCon53073.2023.10131072
Numerical and experimental investigation on the applicability of elastomer tooling components for the manufacturing of undercut geometries by sheet metal forming
Ott, M.; Li, Y.; Krasselt, J.; Steinlehner, F.; Haberkern, P.; Albers, A.; Volk, W.
2023. Sheet Metal 2023, Ed.: M. Merklein, 289–296, Materials Research Forum LLC. doi:10.21741/9781644902417-36
Konzeptionierung einer lösbaren Zellkontaktierung für Akku-Packs zur Erhöhung der Demontage- und Recyclingfreundlichkeit
Müller-Welt, P.; Seiler, T.; Bause, K.; Albers, A.
2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000157954
Vibroacoustic metamaterials as add-on solution for noise reduction in existing housing structures
Bopp, M.; Albers, A.
2023. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise22, Glasgow, Scotland, Pages 3999-5001, 4420–4430, Institute of Noise Control Engineering of the USA (INCE-USA). doi:10.3397/IN_2022_0632
Optische in-situ Analyse der Schmiermittelverteilung graphitgeschmierter Wälzlager
Dewald, A.; Joerger, A.; Lagier, F.; Bischofberger, A.; Brause, K.; Albers, A.
2023. GfT Gesellschaft für Tribologie e.V. (Hg.), 64. Tribologie-Fachtagung 2023, Reibung, Schmierung und Verschleiß, Forschung und praktische Anwendungen Research and Practical Applications, Gesellschaft für Tribologie e.V. (GfT)
Schwingungsreduzierung im nasslaufenden Kupplungssystem – Gezielte Beeinflussung des tribologischen Systems
Bischofberger, A.; Brause, K.; Albers, A.
2023. Forschungsreport / Forschungsvereinigung Antriebstechnik e.V, (1572), Nr. 21378
Barriers to Creativity in Distributed Product Development
Bastian, A.; Kassem, Y.; Kempf, C.; Albers, A.
2023. Proceedings of the International Conference on Industrial Engineering and Operations Management, IEOM Society International. doi:10.46254/AU02.20230059
Understanding the variation of physical elements and their impact on properties and functions: a case study on roll stabilization systems
Albers, A.; Hirschter, T.; Fahl, J.; Tröster, P.; Rapp, S.
2023. 60th Ilmenau Scientific Colloquium, Ilmenau, 4. – 8. September 2023, 17 S., ilmedia. doi:10.22032/DBT.58894
Application Fields of Flexible Production Systems and Their Impact on Agile Product Creation
Schoeck, M.; Hahn, J.; Wagenmann, S.; Rapp, S.; Albers, A.
2023. Procedia CIRP, 120, 1345–1350. doi:10.1016/j.procir.2023.09.174
Future-robust evolution of product portfolios: Need for action from theory and practice
Schlegel, M.; Wiederkehr, I.; Rapp, S.; Koldewey, C.; Albers, A.; Dumitrescu, R.
2023. Procedia CIRP, 120, 792 – 797. doi:10.1016/j.procir.2023.09.077
Interacting Forces for a Resilient, Future-robust Evolution of Product Portfolios
Wiederkehr, I.; Schlegel, M.; Koldewey, C.; Rapp, S.; Dumitrescu, R.; Albers, A.
2023. Procedia CIRP, 120, 816 – 821. doi:10.1016/j.procir.2023.09.081
Expanding the Definition of the Degree of Hybridization of Fuel Cell Electric Vehicles
Braumandl, A.; Kim, G.; Bause, K.; Albers, A.
2023. SAE technical papers, (2023-01-1202), 8 S. doi:10.4271/2023-01-1202
Resurrecting the ‘body’: phenomenological perspectives on embodiment
Borrmann, V.; Coenen, C.; Gerstgrasser, L.; Albers, E.; Müller, O.; Kellmeyer, P.
2023. The Routledge Handbook of the Ethics of Human Enhancement, Hrsg.: Fabrice Jotterand, Marcello Ienca, 87–102, Routledge. doi:10.4324/9781003105596-9
Creation of a Decision-Making basis for an Asset-Based Business Unit Development
Stammnitz, F.; Behling, H.; Albers, A.; Schöck, M.; Rapp, S.
2023. 2023 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), 1–9, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICE/ITMC58018.2023.10332325
Modularisation Strategies for Individualised Precast Construction—Conceptual Fundamentals and Research Directions
Kolbeck, L.; Kovaleva, D.; Manny, A.; Stieler, D.; Rettinger, M.; Renz, R.; Tošić, Z.; Teschemacher, T.; Stindt, J.; Forman, P.; Borrmann, A.; Blandini, L.; Stempniewski, L.; Stark, A.; Menges, A.; Schlaich, M.; Albers, A.; Lordick, D.; Bletzinger, K.-U.; Mark, P.
2023. Designs, 7 (6), Art.-Nr.: 143. doi:10.3390/designs7060143
Application of the Metaverse in Product Engineering – A Workshop for Identification of Potential Field of Action
Düser, T.; Fischer, M.; Schwarz, S. E.; Bastian, A.; Freyer, J.; Vlajic, K.; Eisenmann, M.; Matthiesen, S.; Albers, A.
2023. Metaverse – METAVERSE 2023 – 19th International Conference, Held as Part of the Services Conference Federation, SCF 2023, Honolulu, HI, USA, September 23–26, 2023, Proceedings. Ed.: S. He, J. Lai, L.-J. Zhang, 39 – 52, Springer Nature Switzerland. doi:10.1007/978-3-031-44754-9_4
Identifying Rules Based on Connections Between Engineering Changes in the Wiring Harness Development
Altner, M.; Fletschinger, S.; Winter, R.; Albers, A.
2023. Design in the Era of Industry 4.0, Volume 2 – Proceedings of ICoRD 2023. Ed.: A. Chakrabarti, 17 – 28, Springer Nature Singapore. doi:10.1007/978-981-99-0264-4_2
The Heterogeneity of the Sandy Facies of Opalinus Clay across Scales, from Seismic Surveys to Radionuclide Diffusion - an in-situ Test in the Swiss Rock Laboratory Mont Terri
Heberling, F.; Albers, H.; Beilecke, T.; Deissmann, G.; Fischer, C.; Furche, M.; Geckeis, H.; Hoyer, E.-M.; Joseph, C.; Liebscher, A.; Loon, L. Van; Lüth, S.; Ma, B.; Metz, V.; Müller, K.; Nowak, U.; Quinto, F.; Rebscher, D.; Rühaak, W.; Schulte, F.; Steegborn, F.; Tietz, T.
2023. 18th International Conference on the Chemistry and Migration Behavior of Actinides and Fission Products in the Geosphere (Migration 2023), Nantes, France, September 24–29, 2023
Reasons and triggers using research results in corporate product engineering
Kempf, C.; Schlegel, M.; Rapp, S.; Behdinan, K.; Albers, A.
2023. International Journal of Innovation Management. doi:10.1142/S1363919623400054
Influencing factors on creativity in distributed teams — Systematic literature review
Bastian, A.; Wasserbäch, M.; Albers, A.
2023. International Journal of Innovation Management, 27 (5), 2340009. doi:10.1142/S1363919623400091
Optimization potentials of the transverse flux machine over the product life cycle
Schmid, M.; Schurr, J.; Brandl, L.; Sauerwald, R.; Knecht, S.; Nöller, M.; Yu, Y.; Parspour, N.; Gauterin, F.; Goll, D.; Reuss, H.-C.; Albers, A.; Bause, K.
2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000164338
Evaluation of a method for the additive tooling of injection mould inserts
Schrock, S.; Junk, S.; Albers, A.
2023. Rapid Prototyping Journal. doi:10.1108/RPJ-04-2023-0139
Automatisierte Auslegung von Brennstoffzellenantriebssystemen
Braumandl, A.; Bause, K.; Albers, A.
2023. Dritev 2023, Baden-Baden, 5th - 6th July 2023, 221 – 234, VDI Verlag. doi:10.51202/9783181024201-221
Decoupling Effects in Wet-Running Multi Plate Clutches – Extended and Efficient Use in Hybrid Drive Trains
Bischofberger, A.; Bause, K.; Ott, S.; Albers, A.
2023. 16th International Conference on Engines & Vehicles, Capri, Italy, 10-14 September 2023, SAE International. doi:10.4271/2023-24-0179
Modeling of Embodiment Function Relations using the C&C2-Approach = Modellierung von abschnittsweisen Gestalt-Funktion-Zusammenhängen mithilfe des C&C2-Ansatzes
Tröster, P. M.; Prager, F.; Schmidt, D.; Albers, A.
2023. Stuttgarter Symposium für Produktentwicklung SSP 2023, Stuttgart, 25th May 2023, 175 – 186, Fraunhofer IAO. doi:http://dx.doi.org/10.18419/opus-13131
Implementation and Assessment of a Comprehensive Model-Based Systems Engineering Methodology with Regard to User Acceptance in Practice
Mandel, C.; Kaspar, J.; Heitmann, R.; Horstmeyer, S.; Martin, A.; Albers, A.
2023. Procedia CIRP, 119, 897 – 902. doi:10.1016/j.procir.2023.03.135
Influence of Agility on the Innovation Capability of Organizations – A Systematic Review of Influencing Factors
Schöck, M.; Batora, M.; Müller, J.; Bursac, N.; Albers, A.
2023. Procedia CIRP, 119, 427 – 437. doi:10.1016/j.procir.2023.03.105
Data-driven modelling of the functional level in model-based systems engineering – Optimization of module scopes in modular development
Wagenmann, S.; Züfle, M.; Weidinger, F.; Heinzelmann, L.; Rapp, S.; Bursac, N.; Krause, D.; Albers, A.
2023. Procedia CIRP, 119, 1047 – 1052. doi:10.1016/j.procir.2023.03.147
Stakeholder-oriented Elaboration of Artificial Intelligence use cases using the example of Special-Purpose engineering
Humpert, L.; Wäschle, M.; Horstmeyer, S.; Anacker, H.; Dumitrescu, R.; Albers, A.
2023. Procedia CIRP, 119, 693 – 698. doi:10.1016/j.procir.2023.02.160
Design of a Guideline for a Strategy Process of medium-sized Companies
Stammnitz, F.; Frank, A.; Kempf, C.; Rapp, S.; Albers, A.
2023. Procedia CIRP, 119, 35 – 40. doi:10.1016/j.procir.2023.03.081
Validating a method to enable distributed development teams in an engineering simulator
Duehr, K.; Mai, J.; Rapp, S.; Albers, A.; Bursac, N.
2023. Procedia CIRP, 119, 632 – 637. doi:10.1016/j.procir.2023.02.157
Ontology for Future-robust Product Portfolio Evolution: A Basis for the Development of Models and Methods
Schlegel, M.; Wiederkehr, I.; Rapp, S.; Koldewey, C.; Albers, A.; Dumitrescu, R.
2023. Procedia CIRP, 119, 764 – 769. doi:10.1016/j.procir.2023.01.017
Product Digital-Platform-Business Co-Design: A Systematic Sprint Approach
Brecht, P.; Keller, S.; Nievera, M.; Hahn, C.; Pfaff, F.; Albers, A.
2023. Procedia CIRP, 119, 495 – 500. doi:10.1016/j.procir.2023.03.111
Upgradeable Mechatronic Systems - An Approach to determine changing Product Properties using Foresight
Kuebler, M.; Schuster, W.; Schwarz, S. E.; Braumandl, A.; Siebe, A.; Albers, A.
2023. Procedia CIRP, 119, 78 – 83. doi:10.1016/j.procir.2023.03.084
Design of a Battery Pack with Detachable Cell Contacting for Improved Circular Economy
Müller-Welt, P.; Seiler, T.; Salja, K.; Bause, K.; Albers, A.
2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000162147
Modularisierung für den skalierbaren Betonbau: Baukastenentwicklung und Schnittstellenkonzeption
Manny, A.; Renz, R.; Stempniewski, L.; Stark, A.; Albers, A.
2023. Betonwerk international, (4), 34 – 35
Engineering neu denken und gestalten
Albers, A.
2023. acatech - Deutsche Akademie der Technikwissenschaften. doi:10.48669/aca_2023-7
Knowledge Transfer Quality Improvement - The Quality Enhancement of Knowledge Transfers in Product Engineering
Klippert, M.; Stolpmann, R.; Grum, M.; Thim, C.; Gronau, N.; Albers, A.
2023. Procedia CIRP, 119, 919–925. doi:10.1016/j.procir.2023.02.171
A Method to Support the Improvement of Knowledge Transfers in Product and Production Engineering
Klippert, M.; Klitzing, M. von; Rapp, S.; Albers, A.
2023. 24th Proceedings of the Design Society, International Conference on Engineering Design (ICED 2023), Bordeaux, France, 24.07.-28.07.2023. Vol. 3. Book of Abstracts, 283–292, Cambridge University Press (CUP). doi:10.1017/pds.2023.29
Systematic Evaluation of Knowledge Transfers in Product and Production Engineering
Klippert, M.; Ebert, A.-K.; Tworek, A.; Albers, A.
2023. 34th ISPIM Innovation Conference (ISPIM 2023) , Ljubljana, SHS, June 4-7, 2023. Ed.: I. Bitran, International Society for Professional Innovation Management (ISPIM)
A Data Mining Process Model to Support the Development of Energy Systems of Electric Vehicles
Hörtling, S.; Bause, K.; Albers, A.
2023. 23. Internationales Stuttgarter Symposium : Automobil- und Motorentechnik. Hrsg.: A.C. Kulzer. Bd. 2, 263–277, Springer Vieweg. doi:10.1007/978-3-658-42236-3_20
Systematics for an Integrative Modelling of Product and Production System
Schäfer, L.; Günther, M.; Martin, A.; Lüpfert, M.; Mandel, C.; Rapp, S.; Lanza, G.; Anacker, H.; Albers, A.; Köchling, D.
2023. 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2023), 118, 104–109. doi:10.1016/j.procir.2023.06.019
Influencing Factors on Creativity in Distributed Teams-Systematic Literature Review
Bastian, A.; Wasserbäch, M.; Albers, A.
2023. ISPIM 2023 – XXXIV ISPIM Innovation Conference, Ljubljana, 04.-07.Juni 2023
Methode zur vorausschauenden Bestimmung von Abkühlzeiten bei trockenlaufenden Reibpaarungen : Entwicklung und Anwendung eines mathematischen Modells
Fehrenbacher, R.; Li, R.; Sutschet, A.; Bause, K.; Albers, A.
2023. Kupplungs- und Bremssysteme für mobile und stationäre Anwendungen : VDI-Fachtagung : Auslegung - Systemverhalten - Lösungen : 24. und 25. Mai 2023, Karlsruhe, 185–198, VDI Verlag. doi:10.51202/9783181024140-185
Nutzung von KI-Methoden für die Kupplungsentwicklung in automobilen Antriebssträngen = Use of AI methods for clutch development in automotive drivetrains
Altenburg, S.; Schuchter, F.; Bause, K.; Albers, A.
2023. Forschung im Ingenieurwesen/Engineering Research, 87, 571–579. doi:10.1007/s10010-023-00665-8
Schwingungsreduzierung durch nasslaufende Lamellenkupplungen – Gezielte Auslegung des Tribosystems für einen effizienten Einsatz
Bischofberger, A.; Bause, K.; Ott, S.; Albers, A.
2023. Kupplungs- und Bremssysteme für mobile und stationäre Anwendungen : VDI-Fachtagung : Auslegung – Systemverhalten – Lösungen : 24. und 25. Mai 2023, Karlsruhe, 67–82, VDI Verlag. doi:10.51202/9783181024140-67
Facing extreme uncertainty – how the onset of the COVID-19 pandemic influenced product development
Hölttä-Otto, K.; Björklund, T.; Klippert, M.; Otto, K.; Krause, D.; Eckert, C.; Nespoli, O.; Albers, A.
2023. International Journal of Design Creativity and Innovation, 11 (2), 117–137. doi:10.1080/21650349.2022.2157888
Application and Adaptation of a Process Model for Data-Driven Validation of the System of Objectives
Wagenmann, S.; Krause, A.; Rapp, S.; Albers, A.; Sommer, L.; Bursac, N.
2023. 2022 IEEE International Symposium on Systems Engineering (ISSE), 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISSE54508.2022.10005430
Advanced Engineering Change Impact Approach (AECIA) – Towards a model-based approach for a continuous Engineering Change Management
Martin, A.; Kaspar, J.; Pfeifer, S.; Mandel, C.; Rapp, S.; Albers, A.
2023. 2022 IEEE International Symposium on Systems Engineering (ISSE), 1–7, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISSE54508.2022.10005534
Overview of the Engineering Change Management Process in a Complex Multi-Domain System
Altner, M.; Ye, A.; Winter, R.; Winter, C.; Albers, A.
2023. 2022 IEEE International Symposium on Systems Engineering (ISSE), 1–7, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISSE54508.2022.10005474
Systems-Engineering-based Requirements Reuse in Accordance with Stakeholder Needs in Automotive Product Development
Albers, A.; Kubin, A.; Eckhardt, A.; Rapp, S.; Kempf, C.
2023. IEEE 2022 – 8th IEEE International Symposium on Systems Engineering, Wien, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISSE54508.2022.10005513
2022
Foresight in Product Development - A Review on Existing Understandings and Approaches
Thümmel, C.; Schlegel, M.; Kübler, M. S.; Schwarz, S. E.; Siebe, A.; Albers, A.; Nolte, B.; Sommer, S.; Vietor, T.
2022. Proceedings of the 1st Australian International Conference on Industrial Engineering and Operations Management, 261–271, IEOM Society International. doi:10.46254/AU01.20220086
SGE – Systemgenerationsentwicklung : Analyse und Zusammenhänge von Entwicklungspfaden in der Produktentstehung
Albers, A.; Kürten, C.; Rapp, S.; Birk, C.; Hünemeyer, S.; Kempf, C.
2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000151151
Method to investigate the short-term effects of vibration on the output performance of the proton exchange membrane fuel cell in fuel cell vehicles
Nan, Z.; Behrendt, M.; Bause, K.; Albers, A.; Wei, X.; Ma, T.; Lin, W.; Zuo, S.
2022. Energy Conversion and Management, 269, Art.-Nr.: 116109. doi:10.1016/j.enconman.2022.116109
Numerical study on the behaviour of an innovative concrete dry joint: Investigations under shear loading
Manny, A.; Renz, R.; Albers, A.; Stempniewski, L.; Stark, A.
2022. 14th fib PhD Symposium in Civil Engineering Di Prisco, Marco Meda, Alberto Balazs, Gyorgy L., 129–136
Produkt-Produktions-CoDesign: Ein Ansatz zur integrierten Produkt- und Produktionssystementwickung über Generationen und Lebenszyklen hinweg
Albers, A.; Rapp, S.; Klippert, M.; Lanza, G.; Schäfer, L.
2022. News / Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP, Berliner Kreis & WGMK, (1), 3
Strategische Planung des Entwicklungsrisikos gekoppelter CAE-Methoden = Strategic planning of the development risk of coupled CAE-methods
Albers, A.; Haberkern, P.; Holoch, J.; Joerger, A.; Knecht, S.; Renz, R.; Revfi, S.; Schulz, M.; Spadinger, M.
2022. Konstruktion, 74 (9), 72–77. doi:10.37544/0720-5953-2022-09-72
Conceptual design and investigation of an innovative joint for the rapid and precise assembly of precast UHPC elements
Manny, A.; Stempniewski, L.; Albers, A.; Simons, K.
2022. Engineering Structures, 265, Artkl. Nr.: 114454. doi:10.1016/j.engstruct.2022.114454
Product-Production-Co-Design for Agile Production of Electric Traction Motors
Fleischer, J.; Doppelbauer, M.; Albers, A.; Fraider, F.; Halwas, M.; Schmitt, M.; Breining, P.; Braumandl, A.; Kübler, M.; Bause, K.; Ott, S.
2022. T. E. A. for Electromobility (Ed.), 35th International Electric Vehicle Symposium and Exhibition
How to Use the Levers of Modularity Properly—Linking Modularization to Economic Targets
Schwede, L.-N.; Greve, E.; Krause, D.; Otto, K.; Moon, S. K.; Albers, A.; Kirchner, E.; Lachmayer, R.; Bursac, N.; Inkermann, D.; Rapp, S.; Hausmann, M.; Schneider, J.
2022. Journal of Mechanical Design, 144 (7), Art.Nr. 071401. doi:10.1115/1.4054023
An ontology for remanufacturing systems = Eine Ontologie für Remanufacturing-Systeme
Pfrommer, J.; Klein, J.-F.; Wurster, M.; Rapp, S.; Grauberger, P.; Lanza, G.; Albers, A.; Matthiesen, S.; Beyerer, J.
2022. at - Automatisierungstechnik, 70 (6), 534–541. doi:10.1515/auto-2021-0156
Integrated Optimization of Fuel Cell Drive System Design and Energy Management
Braumandl, A.; Paris, G.; Brause, K.; Albers, A.
2022. 35th International Electric Vehicle Symposium and Exhibition (EVS35), 12 S
Untersuchung des anwendungsnahen, dynamischen Reibverhaltens nasslaufender Lamellenkupplungen am Beispiel zweier Tribosystemvarianten
Bischofberger, A.; Bause, K.; Ott, S.; Albers, A.
2022. Tribologie und Schmierungstechnik, 69 (2), 26–39. doi:10.24053/TuS-2022-0010
Final Report Sino-German Industry 4.0 Factory Automation Platform
Albers, A.; Ovtcharova, J.; Becker, J.; Lanza, G.; Zhang, W.; Zhang, T.; Qiao, F.; Ma, Y.; Wang, J.; Wu, Z.; Ehrmann, C.; Gönnheimer, P.; Behrendt, M.; Mandel, C.; Stürmlinger, T.; Klippert, M.; Kimmig, A.; Schade, F.; Yang, S.; Heider, I.; Xie, S.; Song, K.; Peng, J.; Goncalves, P.; Kampfmann, R.; Schlechtendahl, J.; Kattner, J.; Straub, C.; May, M.; Zhu, Z.; Bai, O.; Lin, Y.; Yang, Z.; Ding, L.; Rossol, A.-S.
2022. (J. Fleischer, Ed.), Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000143693
Implications of Creating Solution Concepts Based on the Use of References
Schlegel, M.; Pfaff, F.; Rapp, S.; Albers, A.
2022. Proceedings of the Design Society, 2, 781–790. doi:10.1017/pds.2022.80
Investigation of friction surfaces during a preconditioning process concerning the behavior of surface parameters and friction coefficient stability
Fehrenbacher, R.; Joerger, A.; Bause, K.; Ott, S.; Albers, A.
2022. 23rd International Colloqium Tribology. A. Fatemimoughari, 295–297, expert-Verlag
A Methodology for Application-Specific Concept Definition of Battery Systems Using Pouch Cells Produced in Flexible Format
Müller-Welt, P.; Nowoseltschenko, K.; Bause, K.; Albers, A.
2022. 35th International Electric Vehicle Symposium and Exhibition (EVS35) Oslo, Norway, June 11-15, 2022
Design eines mechanischen Integrationskonzepts für ein modulares Brennstoffzellensystem unter Berücksichtigung von Anforderungen aus verschiedenen Anwendungsszenarien
Nowoseltschenko, K.; Knecht, S.; Bause, K.; Albers, A.
2022. FC3 Fuel Cell Conference Chemnitz. Hrsg.: D. Unwerth, 294–305
Process Model for the Data-driven Identification of Machine Function Usage for the Reduction of Machine Variants
Wagenmann, S.; Krause, A.; Rapp, S.; Hunemeyer, S.; Albers, A.; Bursac, N.
2022. 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 0444–0451, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IEEM55944.2022.9989909
Scaling of the simulated pass-by measurement based on the vehicle’s acoustic centre
Weber, Y.; Albers, A.
2022. Internoise, 21.-24. August 2022, Glasgow
Computergestützte Bestimmung von Reibungszahlen zur Analyse von Bremsenquietschen
Jörger, A.; Spiropoulos, I.; Dannecker, R.; Albers, A.
2022. ATZextra, 27 (S4), 32–37. doi:10.1007/s35778-022-1105-3
Potentials and Needs of Research References in Corporate Product Engineering
Kempf, C.; Rapp, S.; Albers, A.
2022. ISPIM Connects Athens – The Role of Innovation: Past, Present, Future, on 28-30 November 2022
Model-Based Systems Engineering bei der effektiven Schnittstellengestaltung eines Serious Games als System of Systems
Wäschle, M.; Imamovic, A.; Rapp, S.; Albers, A.
2022. Tag des Systems Engineering : Paderborn, 16.-18. November 2022. Ed.: W. Koch, 36–40, Gesellschaft für Systems Engineering (GfSE)
Descriptive model for evolutionary innovation research in Product Generation Engineering
Pfaff, F.; Eberhardt, C.; Patlakis, C.; Nowak, M.; Rapp, S.; Albers, A.
2022. The XXXIII ISPIM Innovation Conference "Innovating in a Digital World", Copenhagen, Denmark on 05 June to 08 June 2022
Review of Evolutionary Approaches in Design Research to Support PGE - Product Generation Engineering
Pfaff, F.; Kempf, S.; Rapp, S.; Albers, A.
2022. DS 118: Proceedings of NordDesign 2022, Copenhagen, Denmark, 16th - 18th August 2022 : "How product and manufacturing design enable sustainable companies and societies". Ed.: N.H. Mortensen, 12, The Design Society. doi:10.35199/NORDDESIGN2022.15
Methode zur gekoppelten Topologieoptimierung für spritzgegossene KFT-Metall-Hybridverbunde
Lenhardt, S.; Albers, A.
2022. NAFEMS DACH Regionalkonferenz 2022 - Konferenz für Berechnung und Simulation im Engineering : Conference Proceedings, Bamberg, 4.-6. Oktober 2022, 509–514
Einfluss verschiedener Bauteilabmessungen auf eine Topologieoptimierungsmethode zur iterativen Berücksichtigung elastischer Materialeigenschaften aus dem SLM
Holoch, J.; Lenhardt, S.; Albers, A.
2022. NAFEMS DACH Regionalkonferenz 2022 Konferenz für Berechnung & Simulation im Engineering, 4. - 6. Oktober 2022, Bamberg
Evaluation of Engineering Changes Based on Variations from the Model of PGE – Product Generation Engineering in an Automotive Wiring Harness
Albers, A.; Altner, M. M.; Rapp, S.; Valeh, B.; Redinger, H.; Winter, R.
2022. Proceedings of the Design Society, 303–312, Cambridge University Press (CUP). doi:10.1017/pds.2022.32
A review on AI Safety in highly automated driving
Wäschle, M.; Thaler, F.; Berres, A.; Pölzlbauer, F.; Albers, A.
2022. Frontiers in Artificial Intelligence, 5, Art.-Nr.: 952773. doi:10.3389/frai.2022.952773
Einflüsse des Tribosystems auf die Schwingungsreduzierungswirkung in nasslaufenden Lamellenkupplungen – Gestaltungsempfehlungen für eine gezielte Auslegung des Friktionssystems
Bischofberger, A.; Bause, K.; Ott, S.; Albers, A.
2022. 63. Tribologie-Fachtagung (2022), Göttingen, Germany, September 26–28, 2022
A Method for Additive Tooling in Integrated Product Development
Schrock, S.; Junk, S.; Albers, A.
2022. The Design Society 2022 – Proceedings of NordDesign 2022, The Design Society. doi:10.35199/NORDDESIGN2022.16
Access Logics for Situation-Appropriate Selection and Introduction of Methods in Engineering Design
Ammersdörfer, T.; Müller, J.; Heimicke, J.; Reichardt, H.; Rapp, S.; Inkermann, D.; Albers, A.
2022. The Design Society 2022 – Proceedings of NordDesign 2022, 10 S., The Design Society. doi:10.35199/NORDDESIGN2022.26
Temperature Modelling of a Dual Clutch with Artificial Neural Networks
Schuchter, F.; Schönstein, M.; Bause, K.; Albers, A.
2022. 22nd International VDI Congress: Dritev, 335–346, VDI Verlag. doi:10.51202/9783181024010-335
Simulation-based evaluation of high-speed PEEK gears in automotive powertrains and design of a validation environment for high-speed gears
Lagier, F.; Freund, N.; Bause, K.; Ott, S.; Albers, A.
2022. 22nd International VDI Congress: Dritev, 223–240, VDI Verlag. doi:10.51202/9783181024010-223
Graphite Lubrication in Axial Ball Bearings and a Description Approach for Lubrication Mechanisms
Joerger, A.; Bause, K.; Ott, S.; Albers, A.
2022. 4th International FVA-Conference : The Expert Forum for Bearings – Rolling and Plain Bearings!, 5 - 6 July, 2022 in Würzburg, Germany
Multibody analysis of a disc brake system with various contacts and the coefficient of friction as function [in press]
Joerger, A.; Wittig, C.; Dannecker, R.; Spiropoulos, I.; Albers, A.
2022. World Tribology Congress 2022
Towards a System of Systems Engineering Architecture Framework
Mandel, C.; Guenther, M.; Martin, A.; Windisch, E.; Bursac, N.; Rapp, S.; Anacker, H.; Albers, A.
2022. 17th Annual System of Systems Engineering Conference (SOSE), Rochester, NY, USA, 07-11 June 2022, 221–226, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOSE55472.2022.9812634
Considering Functional Safety - supporting the development of automated driving vehicles by the use of Model-Based Systems Engineering
Wäschle, M.; Wolter, K.; Bause, K.; Behrendt, M.; Albers, A.
2022. 17th Annual System of Systems Engineering Conference (SOSE), Rochester, NY, USA, 07-11 June 2022, 275–280, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOSE55472.2022.9812686
Product-Production-CoDesign: An Approach on Integrated Product and Production Engineering Across Generations and Life Cycles
Albers, A.; Lanza, G.; Klippert, M.; Schäfer, L.; Frey, A.; Hellweg, F.; Müller-Welt, P.; Schöck, M.; Krahe, C.; Nowoseltschenko, K.; Rapp, S.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 167–172, Elsevier. doi:10.1016/j.procir.2022.05.231
Improving engineering change management by introducing a standardised description for engineering changes for the automotive wiring harness
Altner, M.; Redinger, H.; Valeh, B.; Kevin, E.; Neckenich, J.; Rapp, S.; Winter, R.; Albers, A.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 538–543, Elsevier. doi:10.1016/j.procir.2022.05.291
Improving distributed collaboration at Porsche Engineering Services GmbH through the application of the EDiT Method
Duehr, K.; Burkhardt, M.; Endepols, S.; Machauer, T.; Albers, A.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 239–244, Elsevier. doi:10.1016/j.procir.2022.05.243
Gaining insights through qualitative modelling - industrial project analysis with focus on derived hypotheses based on the contact and channel approach
Grauberger, P.; Bremer, F.; Pfaff, F.; Tröster, P.; Nelius, T.; Eisenmann, M.; Stöberl, T.; Albers, A.; Matthiesen, S.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 478–483, Elsevier. doi:10.1016/j.procir.2022.05.281
Analysis of Factors Influencing Knowledge Transfer between the Product and Production System Development as well as Production
Klippert, M.; Preißner, A.; Rust, H.; Albers, A.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 340–348, Elsevier. doi:10.1016/j.procir.2022.05.260
The EDiT method guideline - enabling distributed teams through situation-adequate method application
Albers, A.; Duehr, K.; Zech, K.; Rapp, S.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 155–160, Elsevier. doi:10.1016/j.procir.2022.05.229
Knowledge graph for manufacturing cost estimation of gear shafts - a case study on the availability of product and manufacturing information in practice
Hellweg, F.; Brückmann, H.; Beul, T.; Mandel, C.; Albers, A.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 245–250, Elsevier. doi:10.1016/j.procir.2022.05.244
Identifying Factors Influencing the Design of a Suitable Knowledge Base in Product Engineering Projects
Kempf, C.; Sanke, F.; Heimicke, J.; Rapp, S.; Albers, A.
2022. Proceedings of the Design Society, 2, 733–742. doi:10.1017/pds.2022.75
Künstliche Intelligenz im Engineering – Menschorientiere Analyse von Potenzialen am Beispiel vom Sondermaschinenbau
Kharatyan, A.; Humpert, L.; Anacker, H.; Dumitrescu, R.; Wäschle, M.; Albers, A.; Horstmeyer, S.
2022. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (6), 427–431. doi:10.1515/zwf-2022-1074
How to Combine Artifacts in Product Development for more Efficiency?
Tröster, P. M.; Tan, D.; Schlegel, M.; Rapp, S.; Albers, A.
2022. XXXIII ISPIM Innovation Conference "Innovating in a Digital World", Copenhagen, Denmark on 05 June to 08 June 2022
Interaction of Agility and Flexible Production Systems in Innovation [in press]
Schöck, M.; Voß, D.; Rapp, S.; Albers, A.
2022. XXXIII ISPIM Innovation Conference "Innovating in a Digital World", Copenhagen, Denmark on 05 June to 08 June 2022, Lappeenranta University Press
Zukunft der Mobilitätswirtschaft: Empfehlungen der Mobilitätsforschung
Weissenberger-Eibl, M. A.; Albers, A.; Dietmayer, K.; Doll, C.; Kesselring, S.; Parspour, N.; Pyka, A.; Ott, I.; Spath, D.; Walther, C.
2022
Automated Optimization of a Cell Assembly Using Format-Flexibly Produced Pouch Cells
Müller-Welt, P.; Nowoseltschenko, K.; Garot, C.; Bause, K.; Albers, A.
2022. 22. Internationales Stuttgarter Symposium – Automobil- und Motorentechnik. Hrsg.: M. Bargende, 569–581, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-658-37009-1_40
Intelligent Data Analytics with Artificial Intelligence for Hybrid Engine Restart
Schuchter, F.; Bause, K.; Albers, A.
2022. 22. Internationales Stuttgarter Symposium : Automobil- und Motorentechnik. Hrsg.: M. Bargende, 61–72, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-658-37011-4_6
How friction modifier influences the dynamic friction behavior in wet-running clutch systems and its potential for extended use in hybrid drive trains
Bischofberger, A.; Bause, K.; Ott, S.; Albers, A.
2022. 23rd International Colloquium Tribology : Industrial and Automotive Lubrication. Ed.: A. Fatemi, expert-Verlag
Methode zur anwendungsspezifischen Konzeptdefinition eines Batteriesystems unter Verwendung formatflexibel produzierter Pouch-Zellen
Müller-Welt, P.; Nowoseltschenko, K.; Bause, K.; Albers, A.
2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000143138
Physical and Numerical Investigation of the Friction Behavior of Graphite Lubricated Axial Ball Bearings
Joerger, A.; Spadinger, M.; Bause, K.; Ott, S.; Albers, A.
2022. 23rd International Colloquium Tribology, 25.01.2022 - 27.01.2022, Esslingen. Hrsg.: R. Schöll, expert-Verlag
Model of SGE: System Generation Engineering as Basis for Structured Planning and Management of Development
Albers, A.; Rapp, S.
2022. Design Methodology for Future Products. Ed.: D. Krause, 27–46, Springer International Publishing
Development of a Parallel Product-Production Co-design for an Agile Battery Cell Production System
Ruhland, J.; Storz, T.; Kößler, F.; Ebel, A.; Sawodny, J.; Hillenbrand, J.; Gönnheimer, P.; Overbeck, L.; Lanza, G.; Hagen, M.; Tübke, J.; Gandert, J.; Paarmann, S.; Wetzel, T.; Mohacsi, J.; Altvater, A.; Spiegel, S.; Klemens, J.; Scharfer, P.; Schabel, W.; Nowoseltschenko, K.; Müller-Welt, P.; Bause, K.; Albers, A.; Schall, D.; Grün, T.; Hiller, M.; Schmidt, A.; Weber, A.; Biasi, L. de; Ehrenberg, H.; Fleischer, J.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. Hrsg.: Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard, 96–104, Springer International Publishing. doi:10.1007/978-3-030-90700-6_10
Assembly techniques for proton exchange membrane fuel cell stack: A literature review
Song, K.; Wang, Y.; Ding, Y.; Xu, H.; Mueller-Welt, P.; Stuermlinger, T.; Bause, K.; Ehrmann, C.; Weinmann, H. W.; Schaefer, J.; Fleischer, J.; Zhu, K.; Weihard, F.; Trostmann, M.; Schwartze, M.; Albers, A.
2022. Renewable & sustainable energy reviews, 153, Art.-Nr.: 111777. doi:10.1016/j.rser.2021.111777
2021
Artificial Intelligence in Hybrid Vehicle Transmission Control - Literature Review and Research Methodology
Schuchter, F.; Bause, K.; Albers, A.
2021. Proceedings, 2021 International Symposium on Computer Science and Intelligent Controls, ISCSIC 2021, 12-14 November 2021, Rome, Italy. Ed.: J. Gurrola, 303–307, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISCSIC54682.2021.00061
5G in der Industrie. Wege in die Technologieführerschaft in Produktentwicklung und Produktion
Albers, A.; Fleischer, J.; Gönnheimer, P.; Mühlbeier, E.; Schlagenhauf, T.; Wäschle, M.; Anderl, R.; Giese, T.; Wang, Y.; Aurich, J.; Glatt, M.; Litsche, S.; Steglich, S.
2021. acatech - Deutsche Akademie der Technikwissenschaften. doi:10.48669/aca_2021-2
Manufacturing Simulation of Sheet Molding Compound (SMC)
Revfi, S.; Albers, A.; Meyer, N.; Kärger, L.; Schöttl, L.; Bartkowiak, M.; Behdinan, K.
2021. NAFEMS World Congress (NWC 2021)
Interdisciplinary system architectures in agile modular development in the product generation development model using the example of a machine tool manufacturer
Birk, C.; Zuefle, M.; Albers, A.; Bursac, N.; Krause, D.
2021. 23rd International Conference on Engineering Design, ICED 2021, Gothenburg, 16 August 2021 through 20 August 2021, 1897–1906, Cambridge University Press (CUP). doi:10.1017/pds.2021.451
OTPA method-based contribution analysis of components on the vibration of fuel cell in fuel cell vehicles
Nan, Z.; Behrendt, M.; Lu, M.; Petersen, M.; Albers, A.
2021. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise21, Washington, D.C., USA, pages 2949-3943, pp. 3720-3730(11), 2949–3943. doi:10.3397/IN-2021-2501
Variance Quantification of Different Additive Manufacturing Processes for Acoustic Metamaterials
Bopp, M.; Joerger, A.; Behrendt, M.; Albers, A.
2021. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, 263 (4), 2708–2723. doi:10.3397/IN-2021-2211
Creation of Digital Twins - Key Characteristics of Physical to Virtual Twinning in Mechatronic Product Development
Sturm, C.; Steck, M.; Bremer, F.; Revfi, S.; Nelius, T.; Gwosch, T.; Albers, A.; Matthiesen, S.
2021. Proceedings of the Design Society, 1, 781–790. doi:10.1017/pds.2021.78
Extended target weighing approach (ETWA): Impact and risk analysis of lightweight concepts in the product-production system-co-design
Albers, A.; Stürmlinger, T.; Revfi, S.; Behdinan, K.
2021. Proceedings of the Design Society, 1537–1546, Cambridge University Press (CUP). doi:10.1017/pds.2021.415
Early 21st Century cyclone climatology: a perspective. Basic Characterization
Lakkis, S. G.; Canziani, P. O.; Rodriguez, J. O.; Yuchechen, A. E.; O’Neill, A.; Albers, K. H.; Hodges, K.
2021. International journal of climatology, 41 (7), 4019–4046. doi:10.1002/joc.7056
Load-specific variant generation of bead cross sections in sheet metal components by unidirectional carbon fibre reinforcement
Ott, M.; Haberkern, P.; Gruber, M.; Hartmann, C.; Risch, T.; Wunderling, C.; Albers, A.; Volk, W.
2021. IOP conference series / Materials science and engineering, 1157 (1), Art.-Nr.: 012093. doi:10.1088/1757-899X/1157/1/012093
Contract-based methods and activities in the validation of interfaces for System of Systems
Waschle, M.; Behrendt, M.; Xing, K.; Shi, H.; Albers, A.
2021. 16th International Conference of System of Systems Engineering (SoSE), 2021., 102–107, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOSE52739.2021.9497476
Vom Handwerk zur individualisierten Serienfertigung – Schwerpunkt adaptive Modulbauweisen mit Fließfertigungsmethoden
Mark, P.; Lanza, G.; Lordick, D.; Albers, A.; König, M.; Borrmann, A.; Stempniewski, L.; Forman, P.; Frey, A. M.; Renz, R.; Manny, A.
2021. Bautechnik, 98 (3), 243–256. doi:10.1002/bate.202000110
Generalizing decision making for automated driving with an invariant environment representation using deep reinforcement learning
Kutzer, K.; Schörner, P.; Albers, A.; Thomsen, H.; Daaboul, K.; Zöllner, J. M.
2021
Herausforderungen bei der Systems-Engineering-basierten Definition von Anforderungen anhand von Bedarfen in der Automobilentwicklung
Kubin, A.; Etri, M.; Dühr, K.; Rapp, S.; Albers, A.; Eckhardt, A.; Kattwinkel, D.; Bender, B.
2021. 16. Symposium für Vorausschau und Technologieplanung - SVT 2021, Berlin
Gezielte Variation des Beanspruchungskollektivs zur Verbesserung des Einlaufverhaltens im Trockenlauf
Klotz, T.; Bause, K.; Ott, S.; Albers, A.
2021. Kupplungen und Kupplungssysteme in Antrieben 2021 : Auslegung, Systemverhalten, Lösungen : VDI-Fachtagung : Ettlingen bei Karlsruhe, 24. und 25. November 2021, 279–290, VDI Verlag. doi:10.51202/9783181023822-279
Methods and Tools to Identify References in Product Engineering
Kempf, C.; Derst, M.; Hirschter, T.; Heimicke, J.; Rapp, S.; Albers, A.
2021. ISPIM Connects Valencia – Reconnect, Rediscover, Reimagine, on 30 November to 2 December 2021. Event Proceedings
Queue Length Forecasting in Complex Manufacturing Job Shops
May, M. C.; Albers, A.; Fischer, M. D.; Mayerhofer, F.; Schäfer, L.; Lanza, G.
2021. Forecasting, 2021 (2), 322–338. doi:10.3390/forecast3020021
Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis
Meyer, M.; Hemkentokrax, J.-P.; Koldewey, C.; Dumitrescu, R.; Tröster, P. M.; Schlegel, M.; Kling, C. L.; Rapp, S.; Albers, A.
2021. 16th Symposium for Foresight and Technology Planning, Berlin, Germany
Wertstromkinematik – Produktionssysteme neu gedacht: Interdisziplinäres Forscherteam arbeitet an der Produktionstechnik der Zukunft (Teil 2)
Kimmig, A.; Schöck, M.; Mühlbeier, E.; Oexle, F.; Fleischer, J.; Bönsch, J.; Ovtcharova, J.; Hahn, J.; Grunwald, A.; Albers, A.; Rapp, S.; Hagenmeyer, V.; Scholz, S. G.; Schmidt, A.; Müller, T.; Becker, J.; Schade, F.; Beyerer, J.; Rehak, J.; Zwick, T.; Pauli, M.; Nuß, B.; Lanza, G.; Schild, L.; Overbeck, L.
2021. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (12), 935–939. doi:10.1515/zwf-2021-0207
Enhancing Consistency in Development Projects by Employing a Digital Model Master
Kürten, C.; Boog, S.; Rios-Pindl, M.; Elsäßer, A.; Bause, K.; Albers, A.
2021. 9th International Symposium on Development Methodology, 9.-10. November 2021, Wiesbaden, Germany
Design of a modularized fuel cell system for multiple use in different applications
Nowoseltschenko, K.; Müller-Welt, P.; Bause, K.; Albers, A.
2021. Proceedings of the FISITA World Congress 2021, Prague, 14.-16. September 2021. doi:10.46720/F2021-ADM-139
Data-Based Supply Chain Collaboration - Improving Product Quality in Global Production Networks by Sharing Information
Silbernagel, R.; Wagner, C.; Albers, A.; Trapp, T.-U.; Lanza, G.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 470–475, Elsevier. doi:10.1016/j.procir.2021.11.079
Go-to-market canvas - Market access concept for invention in the early phase of product generation development [Go-to-market canvas - Ein Marktzugangskonzept für Inventionen in der frühen Phase der Produktgenerationsentwicklung]
Niever, M.; Schulz, F.; Heimicke, J.; Hahn, C. H.; Albers, A.
2021. 2021 Stuttgarter Symposium für Produktentwicklung, SSP 2021, 20. Mai 2021, online, 363–374
Multi Scale Modelling of Friction Induced Vibrations at the Example of a Disc Brake System
Joerger, A.; Spiropoulos, I.; Dannecker, R.; Albers, A.
2021. Applied Mechanics, 2 (4), 1037–1056. doi:10.3390/applmech2040060
Introducing Agility into Strategic Value Management of an OEM
Heimicke, J.; Reuter, Y.; Müller, J.; Grau, A.; Sebastian, H.; Albers, A.
2021. ISPIM Connects Valencia - Reconnect, Rediscover, Reimagine, Valencia, E, November 29 - December 1, 2021 - Valencia, Spain
Investigation on the Influence of Different Modeling of Multiple Surface Layers on a 3D Topology Optimization
Holoch, J.; Lenhardt, S.; Renz, R.; Albers, A.
2021. NAFEMS World Congress 2021
Generalizing decision making for automated driving with an invariant environment representation using deep reinforcement learning
Kutzer, K.; Schörner, P.; Albers, A.; Thomsen, H.; Daaboul, K.; Zöllner, J. M.
2021. 2021 IEEE Intelligent Vehicles Symposium (IV): 11-17 July 2021, online, 994–1000, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IV48863.2021.9575669
A Model-Based Systems Engineering Approach to Support Continuous Validation in PGE - Product Generation Engineering
Mandel, C.; Böning, J.; Behrendt, M.; Albers, A.
2021. 2021 IEEE International Symposium on Systems Engineering (ISSE): 13 September - 13 October 2021, online, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISSE51541.2021.9582475
The positive impact of agile retrospectives on the collaboration of distributed development teams – A practical approach on the example of Bosch engineering GmbH
Duehr, K.; Efremov, P.; Heimicke, J.; Teitz, E. M.; Ort, F.; Weissenberger-Eibl, M.; Albers, A.
2021. Proceedings of the Design Society, 3071–3080, Cambridge University Press (CUP). doi:10.1017/pds.2021.568
Approach for the development and application of target process module sets
Albers, A.; Wilmsen, M.; Gericke, K.
2021. 23rd International Conference on Engineering Design, ICED 2021, Gothenburg, 16 August 2021 through 20 August 2021, 531–540, Cambridge University Press (CUP). doi:10.1017/pds.2021.53
Selection of reference system elements in the model of PGE - Product generation engineering: Method for the integration of customer and user satisfaction in product planning
Albers, A.; Zimmermann, V.; Marthaler, F.; Bursac, N.; Duehr, K.; Spadinger, M.
2021. 23rd International Conference on Engineering Design, ICED 2021, Gothenburg, 16 August 2021 through 20 August 2021, 2611–2620, Cambridge University Press (CUP). doi:10.1017/pds.2021.522
Proposing a specification structure for complex products in model-based systems engineering (MBSE)
Fahl, J.; Hirschter, T.; Wöhrle, G.; Albers, A.
2021. Proceedings of the Design Society, 2481–2490, Cambridge University Press (CUP). doi:10.1017/pds.2021.509
Developing systems visualisations in design through a typology of visual tasks: A mechatronic case
Idrissov, A.; Rapp, S.; Albers, A.; Maier, A. M.
2021. Proceedings of the Design Society, 1213–1222, Cambridge University Press (CUP). doi:10.1017/pds.2021.121
Examining the quality of knowledge transfers – the draft of an empirical research
Grum, M.; Klippert, M.; Albers, A.; Gronau, N.; Thim, C.
2021. Proceedings of the Design Society, 1431–1440, Cambridge University Press (CUP). doi:10.1017/pds.2021.404
Topografieänderungen während der Vorkonditionierung: Eine Analyse des Zusammenhangs der Oberflächenbeschaffenheit und deren Kenngrößen von trockenlaufenden Reibpaarungen
Fehrenbacher, R.; Joerger, A.; Bause, K.; Ott, S.; Albers, A.
2021. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen : 62. Tribologie-Fachtagung 2021, 27. bis 29. September 2021 in Göttingen. Hrsg.: GfT Gesellschaft für Tribologie e.V., Gesellschaft für Tribologie e.V. (GfT)
Suggestive Sound Design: How to use Active Interior Sound Design to improve traffic safety
Petersen, M.; Behrendt, M.; Etri, M.; Spekker, M.; Lefringhausen, T. J.; Albers, A.
2021. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise21: Washington, D.C., USA. Ed.: T. Dare, 1561–1573, Institute of Noise Control Engineering of the USA (INCE-USA). doi:10.3397/IN-2021-1874
Method for localisation of sound sources and aggregation to an acoustic center
Weber, Y.; Behrendt, M.; Gohlke, T.; Albers, A.
2021. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise21: Washington, D.C., USA. Ed.: T. Dare, 894–906, Institute of Noise Control Engineering of the USA (INCE-USA). doi:10.3397/IN-2021-1689
Untersuchung des Kontaktverhaltens eines Synchronisierungssystems mit numerischer Modellierung und experimenteller Analyse
Chen, S.; Erdmann, K.; Bause, K.; Albers, A.
2021. 62. Tribologie-Fachtagung: GfT Gesellschaft für Tribologie e. V. (Hg.) 2021 – Reibung, Schmierung und Verschleiß, 20–29, Gesellschaft für Tribologie e.V. (GfT)
Extended Abstract: Untersuchung des anwendungsnahen, dynamischen Reibverhaltens nasslaufender Lamellenkupplungen am Beispiel zweier Tribosystemvarianten
Bischofberger, A.; Bause, K.; Ott, S.; Albers, A.
2021. 62. Tribologie-Fachtagung 2021 - Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen, 27. bis 29. September 2021, 21/1–21/5, Gesellschaft für Tribologie e.V. (GfT)
Hochleistungskunststoffe im automobilen Hauptantriebsstrang - Eine Validierungsumgebung zur Erprobung von PEEK als Zahnradwerkstoff für Hochdrehzahlverzahnungen
Lagier, F.; Bause, K.; Ott, S.; Albers, A.
2021. News / Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP, Berliner Kreis & WGMK, 2021 (2), 13–14
A Multi-Material Topology Optimization Method for the Resolution of Interfaces by means of the CISAMR-Algorithm
Renz, R.; Frank, N.; Albers, A.
2021. 14th World Congress of Structural and Multidisciplinary Optimization (WCSMO 2021), Online, June 13–18, 2021
Minimum Viable Products in Mechatronic System Engineering: Approach for Early and Continuous Validation
Zimmermann, V.; Heimicke, J.; Schnurr, T.; Bursac, N.; Albers, A.
2021. R&D Management Conference 2021 “Innovation in an Era of Disruption”, Glasgow, Scotland, July, 6th - 8th, 2021
Systematische Erfassung von Einflussfaktoren für das Additive Tooling von Spritzgusswerkzeugen
Schrock, S.; Proksch, A.; Rapp, S.; Junk, S.; Albers, A.
2021. Proceedings of the 32nd Symposium Design for X (DFX 2021). Ed.: D. Krause, The Design Society. doi:10.35199/dfx2021.09
Experimentelle Analyse des Reibungsverhaltens graphitgeschmierter Axialkugellager
Joerger, A.; Lin, T.-H.; Spadinger, M.; Bause, K.; Ott, S.; Albers, A.
2021. 62. Tribologie-Fachtagung Reibung, Schmierung und Verschleiß. Hrsg.: GfT Gesellschaft für Tribologie e.V., Gesellschaft für Tribologie e.V. (GfT)
Anforderungsmanagement in der Agilen Entwicklung Mechatronischer Systeme – ein Widerspruch in sich?
Bursac, N.; Rapp, S.; Waldeier, L.; Wagenmann, S.; Albers, A.; Deiss, M.; Hettich, V.
2021. EEE 2021 - Entwerfen Entwickeln Erleben in Produktentwicklung und Design 2021, 17. und 18. Juni 2021, digital. Hrsg.: R. Stelzer, TUDpress
Virtual-Reality-Umgebung für die Visualisierung von Entwicklungszielgrößen auf Basis des Referenzsystems im Modell der PGE – Produktgenerationsentwicklung
Pfaff, F.; Rapp, S.; Albers, A.
2021. EEE 2021 - Entwerfen Entwickeln Erleben in Produktentwicklung und Design 2021. Hrsg.: R. Stelzer, 175–187, TUDpress. doi:10.25368/2021.20
Characterizing Product Development Processes in Start-ups – an Empirical Study
Pfaff, F.; Kubisch, J.; Rapp, S.; Albers, A.
2021. Proceedings of the XXXII ISPIM Innovation Conference, Berlin, Germany, 20-23 June 2021 (Online). "Innovating our Common Future"
An approach to validate simulation models for the optimization of fiber-reinforced bead patterns
Haberkern, P.; Ott, M.; Volk, W.; Albers, A.
2021. Seminar Integration von Simulation und Test in der Produktentwicklung : 16. - 17. Juni 2021, online-interaktiv, Zuddl [Integration of Simulation and Test in Product Development], NAFEMS Deutschland, Österreich, Schweiz GmbH
A Validation Environment for a method to enable distributed agile product development teams [in press]
Duehr, K.; Hofelich, M.; Beck, L.; Albers, A.
2021. R&D Management Conference 2021 “Innovation in an Era of Disruption”, Glasgow, Scotland, July, 6th - 8th, 2021
EDiT – Requirements of Enabling Distributed Collaboration in Product Development Teams
Duehr, K.; Schiele, A.; Mueller, H.; Kopp, D.; Hofelich, M.; Albers, A.
2021. The ISPIM Innovation Conference – Innovating Our Common Future, Berlin, Germany on 20-23 June 2021
An Approach for the Transfer of Real Surfaces in Finite Element Simulations
Joerger, A.; Reichert, S.; Wittig, C.; Sistanizadeh Aghdam, N.; Albers, A.
2021. Lubricants, 9 (8), Article no: 77. doi:10.3390/lubricants9080077
Nutzer- und Aufgabengerechte Unterstützung von Modellierungsaktivitäten im Kontext des MBSE-Model-Based Systems Engineering
Mandel, C.; Behrendt, M.; Albers, A.
2021. EEE 2021 - Entwerfen Entwickeln Erleben in Produktentwicklung und Design 2021. Hrsg.: R. Stelzer, 727–736, TUDpress
Analyse des Einflusses von Faktoren auf die agilen Fähigkeiten von Organisationseinheiten in der Entwicklung physischer Systeme
Heimicke, J.; Rösel, T.; Albers, A.
2021. EEE 2021 - Entwerfen Entwickeln Erleben in Produktentwicklung und Design 2021. Hrsg.: R. Stelzer, 691–702, TUDpress
Ermittlung von Anforderungen an eine Anwendungsfall-Spezifische Einführung Agiler Ansätze – Erkenntnisse aus der Anwendung des Agile-Stage-Gate Hybrids
Heimicke, J.; Spahic, A.; Bramato, L.; Albers, A.
2021. EEE 2021 - Entwerfen Entwickeln Erleben in Produktentwicklung und Design 2021. Hrsg.: R. Stelzer, 633–644, TUDpress
Entwicklung einer agil-strukturierten Prozesslösung mittels ASD – Agile Systems Design für das technische Änderungsmanagement im After Sales eines OEM der Automobilindustrie
Heimicke, J.; Pfau, S.; Vetten, L.; Albers, A.
2021. EEE 2021 - Entwerfen Entwickeln Erleben in Produktentwicklung und Design 2021. Hrsg.: R. Stelzer, 255–270, TUDpress
Knowledge types to support product developers in different product engineering activities - a Systematic Literature Review
Kempf, C.; Klippert, M.; Sadic, E.; Albers, A.
2021. R&D Management Conference 2021 “Innovation in an Era of Disruption”, Glasgow, Scotland, July, 6th - 8th, 2021
Dealing with Market Uncertainty in Product Development – A Systematic Literature Review
Zimmermann, V.; Kempf, C.; Lutz, S.; Bursac, N.; Albers, A.
2021. R&D Management Conference 2021 “Innovation in an Era of Disruption” July, 6th - 8th, 2021, Glasgow, Scotland
Umgang mit Marktunsicherheiten in der Zielsystementwicklung: Methode zur Reduktion von Definitionslücken bei der Konkretisierung des Initialen Zielsystems
Zimmermann, V.; Kempf, C.; Hartmann, L.; Bursac, N.; Albers, A.
2021. EEE 2021 - Entwerfen Entwickeln Erleben in Produktentwicklung und Design 2021. Hrsg.: R. Stelzer, TUDpress
Erweiterte Analyse ausgewählter Schwingungsphänomene mit dem C & C²-Ansatz am Beispiel einer Einscheibentrockenkupplung
Tröster, P. M.; Klotz, T.; Rapp, S.; Xiao, Y.; Ott, S.; Albers, A.
2021. EEE 2021 - Entwerfen Entwickeln Erleben in Produktentwicklung und Design 2021. Hrsg.: R. Stelzer, 383–399, TUDpress
Evaluation of Challenges in the Implementation of Scrum in a large German Plant Engineering Company: Derivation of Hypotheses for an Improved Introduction of Agile Approaches into the Processes of Physical Product Development
Heimicke, J.; Roebenack, S.; Frobieter, C.; Tihlarik, A.; Albert, B.; Bramato, L.; Mandel, C.; Behrendt, M.; Albers, A.
2021. R&D Management Conference 2021 “Innovation in an Era of Disruption”, Glasgow, Scotland, July, 6th - 8th, 2021
Produktportfolio-übergreifendes Spezifizieren von Produktfunktionen am Beispiel der Sportwagenentwicklung
Fahl, J.; Hirschter, T.; Albers, A.
2021. Stuttgarter Symposium für Produktentwicklung SSP 2021 : Konferenz zum 6. Stuttgarter Symposium 2021 : Stuttgart, 20. Mai 2021, wissenschaftliche Konferenz. Hrsg.: Hansgeorg Binz, Bernd Bertsche, Dieter Spath, Daniel Roth, 2–11, Fraunhofer IAO
Go-To-Market Canvas – Ein Marktzugangskonzept für Inventionen in der frühen Phase der Produktgenerationsentwicklung = Go-To-Market Canvas – Market access concept for invention in the early phase of product generation development
Niever, M.; Schulz, F.; Heimicke, J.; Hahn, C. H.; Albers, A.
2021. Stuttgarter Symposium für Produktentwicklung SSP 2021 Stuttgart, 20. Mai 2021, 1–12, Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO
Foster Problem-solving Capabilities with the Innovation Coaching Training Concept
Niever, M.; Schorb, L.; Hahn, C.; Albers, A.
2021. Proceedings of the XXXII ISPIM Innovation Conference, Berlin, Germany, 20-23 June 2021 (Online). "Innovating our Common Future"
Influence of different modeling for outer contour and inner zones in topology optimization
Holoch, J.; Albers, A.
2021. WCSMO 14: 14th World Congress of Structural and Multidisciplinary Optimization, 13.-18. Juni 2021, 148
Thermal Simulation and Optimization of an Electro-Hydrostatic Actuator to reduce Component Temperatures
Knecht, S.; Albers, A.
2021. WCSMO 14: 14th World Congress of Structural and Multidisciplinary Optimization, 13-18. Juni 2021, 275
Industrializing precast productions
Mark, P.; Lanza, G.; Lordick, D.; Albers, A.; König, M.; Borrmann, A.; Stempniewski, L.; Forman, P.; Frey, A. M.; Renz, R.; Manny, A.; Stindt, J.
2021. Civil engineering design, 3 (3), 87–98. doi:10.1002/cend.202100019
Situation- and need-based method recommendation for coaching agile development teams
Niever, M.; Trefz, N.; Heimicke, J.; Hahn, C.; Albers, A.
2021. Procedia CIRP, 100, 512–517. doi:10.1016/j.procir.2021.05.112
Agile product development: an analysis of acceptance and added value in practice
Heimicke, J.; Kaiser, S.; Albers, A.
2021. Procedia CIRP, 100, 768–773. doi:10.1016/j.procir.2021.05.046
A framework for generating agile methods for product development
Heimicke, J.; Dühr, K.; Krüger, M.; Ng, G.-L.; Albers, A.
2021. Procedia CIRP, 100, 786–791. doi:10.1016/j.procir.2021.05.043
Identifying used methods and datasets in scientific publications
Färber, M.; Albers, A.; Schüber, F.
2021. Proceedings of the Workshop on Scientific Document Understanding: co-located with 35th AAAI Conference on Artificial Inteligence (AAAI 2021) ; Remote, February 9, 2021. Ed.: A. P. B. Veyseh, RWTH Aachen
On the bead design in LFT structures: The influence of manufacturing-induced residual stresses
Revfi, S.; Mikus, M.; Behdinan, K.; Albers, A.
2021. Design Science, 7, Art.-Nr.: e5. doi:10.1017/dsj.2021.4
Training responsible engineers. Phronesis and the role of virtues in teaching engineering ethics
Frigo, G.; Marthaler, F.; Albers, A.; Ott, S.; Hillerbrand, R.
2021. Australasian journal of engineering education, 26 (1), 25–37. doi:10.1080/22054952.2021.1889086
Vorkonditionierung trockenlaufender Reibpaarungen für eine stabile Reibfunktion im Feld
Fehrenbacher, R.; Bause, K.; Ott, S.; Albers, A.
2021. Kupplungen und Kupplungssysteme in Antrieben 2021 : Auslegung, Systemverhalten, Lösungen : VDI-Fachtagung : Ettlingen bei Karlsruhe, 24. und 25. November 2021 / VDI-GPP, 173–180, VDI Verlag
2020
Produktgeneration 1 im Modell der PGE – Produktgenerationsentwicklung: Verständnis, Zusammenhänge und Auswirkungen in der Produktentwicklung
Albers, A.; Ebertz, J.; Rapp, S.; Heimicke, J.; Kürten, C.; Zimmermann, V.; Bause, K.; Blattner, R.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000127971
A guideline for modelling relations of embodiment and function in agile development
Grauberger, P.; Heimicke, J.; Nann, S.; Albers, A.; Matthiesen, S.
2020. SN applied sciences, 2 (9), Article: 1475. doi:10.1007/s42452-020-03271-3
Wet clutch as an enabler of cost-efficient hybrid drive systems Decoupling as functional extension
Albers, A.; Bischofberger, A.; Ott, S.
2020. 20. Internationales Stuttgarter Symposium : Automobil- und Motorentechnik. [17. und 18. März 2020, Stuttgart]. Hrsg.: M. Bargende, 251–265, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-658-29943-9_22
Agile Planung und Entwicklung von Produkt-Service Systemen – Unterstützung der Einführung und Berücksichtigung damit verbundener Geschäftsmodelle
Kölsch, P.; Heimicke, J.; Albers, A.; Aurich, J. C.
2020. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (6), 381–386. doi:10.3139/104.112369
Agile meets plan-driven - hybrid approaches in product development : a systematic literature review
Heimicke, J.; Chen, R.; Albers, A.
2020. Proceedings of the Design Society, 1, 577–586. doi:10.1017/dsd.2020.259
Supporting The Modelling In MBSE By Applying Product Generation Engineering Using Electronic Compact Actuators As An Example
Wäschle, M.; Martin, A.; Radimersky, A.; Behrendt, M.; Albers, A.
2020. Proceedings of the Design Society: DESIGN Conference, 1, 2425–2434. doi:10.1017/dsd.2020.293
Qualitative Modelling in Embodiment Design - Investigating the Contact and Channel Approach Through Analysis of Projects
Grauberger, P.; Bremer, F.; Sturm, C.; Hoelz, K.; Wessels, H.; Gwosch, T.; Wagner, R.; Lanza, G.; Albers, A.; Matthiesen, S.
2020. Proceedings of the Design Society: DESIGN Conference, 1, 897–906. doi:10.1017/dsd.2020.260
DEVELOPMENT of DECISION TOOL for A PROBLEM-SOLVING ACTIVITY USING PAIRWISE COMPARISON TECHNIQUE to SUPPORT AN INTUITIVE DECISION
Tanaiutchawoot, N.; Bursac, N.; Gross, J.; Rapp, S.; Albers, A.
2020. Proceedings of the Design Society, 1, 423–430. doi:10.1017/dsd.2020.255
METHOD for the IDENTIFICATION of REQUIREMENTS for DESIGNING REFERENCE PROCESSES
Wilmsen, M.; Gericke, K.; Jäckle, M.; Albers, A.
2020. Proceedings of the Design Society, 1, 1175–1184. doi:10.1017/dsd.2020.301
Case study: challenges in maturity level determination for a new body in white application in the automotive industry
Richter, T. O.; Zechiel, J.; Albers, A.; Glas, A.
2020. Tools and Methods of Competitive Engineering. Part 1. Ed.: Imre Horváth, 383–392, Delft University of Technology (TU Delft)
LDA models for objective validation in the early phase of product development
Richter, T. O.; Wong, W. H.; Albers, A.
2020. Tools and Methods of Competitive Engineering. Part 1. Ed.: Imre Horváth, 499–514, Delft University of Technology (TU Delft)
Measuring the concretization level of Systems of Objectives in the early phase of product development to derive the product maturity
Richter, T. O.; Troester, P. M.; Felber, A.; Albers, A.; Behdinan, K.
2020. Proceedings of the 14th Annual IEEE International Systems Conference (SYSCON 2020), 16. - 17.09.2020, Gera
Performance Evaluation of Agility in Product Development using targeted KPIs [in press]
Heimicke, J.; Mellert, T.; Albers, A.
2020. ISPIM Connects Global 2020: Celebrating the World of Innovation. Ed.: I. Bitran
Agile Development in different Organizational Structures: Potentials and Challenges [in press]
Heimicke, J.; Krüger, M.; Ng, G.-L.; Bursac, N.; Albers, A.
2020. ISPIM Connects Global 2020: Celebrating the World of Innovation. Ed.: I. Bitran
Herausforderungen des agilen und sequentiellen Zielsystem- und Anforderungsmanagements
Zimmermann, V.; Heimicke, J.; Bohn, R.; Schuhmacher, L.; Trost, S.; Albers, A.
2020. Nachhaltige Produktentwicklung : KT 2020 : 18. Gemeinsames Kolloquium Konstruktionstechnik : am 1. und 2. Oktober 2020 in Duisburg : Tagungsband. Hrsg.: B. Corves, 245–258, DuEPublico - Universität Duisburg-Esssen
Charakterisierung der Entwicklungsaufgabe zur methodischen Potentialfindung in der standortverteilten Produktentwicklung
Duehr, K.; Nix, B.; Albers, A.
2020. Nachhaltige Produktentwicklung : KT 2020 : 18. Gemeinsames Kolloquium Konstruktionstechnik : am 1. und 2. Oktober 2020 in Duisburg : Tagungsband. Hrsg.: B. Corves, 221–232. doi:10.17185/duepublico/73094
Impact and risk analysis in the integrated development of product and production system
Stürmlinger, T.; Jost, D.; Mandel, C.; Behrendt, M.; Albers, A.
2020. Procedia CIRP, 91, 627–633. doi:10.1016/j.procir.2020.02.221
Model of PGE – Product Generation Engineering by the Example of Autonomous Driving
Albers, A.; Fahl, J.; Hirschter, T.; Endl, M.; Ewert, R.; Rapp, S.
2020. Procedia CIRP, 91, 665–677. doi:10.1016/j.procir.2020.03.113
A methodology for the systematic identification of market uncertainties to support the development of the system of objectives = Methode zur gezielten Identifikation von Marktunsicherheiten zur Unterstötzung der Zielsystementstehung
Zimmermann, V.; Prinz, R.; Albers, A.
2020. Proceedings of the 31st Symposium Design for X, DFX 2020; Virtual, Online, 16 - 17 September 2020. Ed.: Dieter Krause, 209–218. doi:10.35199/dfx2020.22
Future-oriented product engineering through environment scenarios by using the example of future forms of mobility in urban living spaces
Marthaler, F.; Stehle, S.; Siebe, A.; Albers, A.
2020. DS 101: Proceedings of NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020. Ed.: N.H. Mortensen, The Design Society. doi:10.35199/NORDDESIGN2020.32
Development of strategic guidelines for agile Parts Ma-Turity Management of engine subsystems in the automotive industry during series ramp-up
Rapp, S.; Heimicke, J.; Weber, J.; Albers, A.
2020. DS 101: Proceedings of NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020. Ed.: N.H. Mortensen, The Design Society
KPI-linked transformation process for digitized production through the systematic analysis and evaluation of trends
Marthaler, F.; Mertes, T.; Albers, A.
2020. DS 101: Proceedings of NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020. Ed.: N.H. Mortensen, The Design Society. doi:10.35199/NORDDESIGN2020.51
SLM-Topo Einfluss unterschiedlicher Modellierung von Randschicht und innerem Volumen auf eine 2DTopologieoptimierung
Holoch, J.; Träger, L.; Albers, A.
2020. Conference Proceedings NAFEMS20 DACH. Hrsg.: NAFEMS Deutschland, Schweiz GmbH, Österreich, 106–109
Einfluss der Volumen- und Shell-Dickenmodellierung auf die hauptspannungsbasierte Trajektorienberechnung zur Bestimmung von Sickenverläufen
Revfi, S.; Fünkner, M.; Albers, A.; Behdinan, K.
2020. Conference Proceedings NAFEMS20 DACH. Hrsg.: NAFEMS Deutschland, Schweiz GmbH, Österreich, 98–101
Entwicklung eines modularen Ansatzes zur automatisierten, simulationsbasierten Validierung der Schaltstrategie moderner Doppelkupplungsgetriebe
Köber, J.; Pflüger, L.; Albers, A.
2020. Conference Proceedings NAFEMS20 DACH. Hrsg.: NAFEMS Deutschland, Schweiz GmbH, Österreich, 298–301
Objective based process model for enhancing the product maturity level in the early phase of a development process
Richter, T.; Schmidt, D.; Hahlweg, H.; Behdinan, K.; Albers, A.
2020. Procedia CIRP, 91, 207–213. doi:10.1016/j.procir.2020.02.169
Visualization of requirements engineering data to analyse the current product maturity in the early phase of product development
Richter, T. O.; Felber, A.; Troester, P. M.; Albers, A.; Behdinan, K.
2020. Procedia CIRP, 91, 271–277. doi:10.1016/j.procir.2020.02.176
Literature-based identification of success-relevant influencing factors of distributed product development
Albers, A.; Weissenberger-Eibl, M. A.; Duehr, K.; Zech, K.; Seus, F.
2020. Procedia CIRP, 91, 415–420. doi:10.1016/j.procir.2019.11.007
NVH analysis of fuel cell with consideration of driving manoeuvres in FCV
Nan, Z.; Behrendt, M.; Petersen, M.; Albers, A.
2020. Internoise 2020
Defining, Formulating and Modeling Product Functions in the Early Phase in the Model of PGE - Product Generation Engineering
Albers, A.; Fahl, J.; Hirschter, T.; Haag, S.; Hünemeyer, S.; Staiger, T.
2020. 6th IEEE International Symposium on Systems Engineering (ISSE) 2020, October 12 - November 12 (virtual conference), 2020, Vienna, Austria
Functions in the Early Phase of Product Development: A Systematic Literature Review
Fahl, J.; Hirschter, T.; Haag, S.; Staiger, T.; Albers, A.
2020. 6th IEEE International Symposium on Systems Engineering (ISSE) 2020, Wien, 12 - 11 November 2020 (virtual conference)
Experimentelle und computergestützte Untersuchung des Reibungs- und Verschleißverhaltens graphitgeschmierter Axialwälzlager
Joerger, A.; Lin, T.-H.; Bause, K.; Spadinger, M.; Albers, A.
2020. Reibung, Schmierung und Verschleiß : Forschung praktische Anwendung, GfT
Intelligente Modularisierung für den skalierbaren Betonbau durch Adaption der Methoden zur Baukastenentwicklung
Albers, A.; Kempf, C.; Renz, R.; Spadinger, M.; Stempniewski, L.; Manny, A.
2020. Betonwerk international, (3), 27
Forcing creativity in agile innovation processes through ASD-innovation coaching
Albers, A.; Hahn, C.; Niever, M.; Heimicke, J.; Marthaler, F.; Spadinger, M.
2020. Proceedings of the Sixth International Conference on Design Creativity (ICDC 2020). Ed. J.-F. Boujut, 231–238, The Design Society. doi:10.35199/ICDC.2020.29
Model-Based Systems Engineering Approaches for the integrated development of product and production systems in the context of Industry 4.0
Mandel, C.; Stürmlinger, T.; Yue, C.; Behrendt, M.; Albers, A.
2020. 14th Annual IEEE International Systems Conference (SysCon 2020), 16. - 17.09.2020, Gera, Institute of Electrical and Electronics Engineers (IEEE)
Model-Based Systems Engineering methods to support the reuse of knowledge within the development of validation environments
Mandel, C.; Wolter, K.; Bause, K.; Behrendt, M.; Hanf, M. M.; Albers, A.
2020. 14th Annual IEEE International Systems Conference (SysCon 2020),16. - 17.09.2020, Gera, Institute of Electrical and Electronics Engineers (IEEE)
SLM-Topo - Prozessspezifische Topologieoptimierungsmethode für im Selektiven Laserschmelzen gefertigte Leichtbaustrukturen
Holoch, J.; Czink, S.; Spadinger, M.; Dietrich, S.; Schulze, V.; Albers, A.
2020. Industrie 4.0 Management, 36 (4), 45
Continuous development environment for the validation of autonomous driving functions
Lutz, S.; Behrendt, M.; Albers, A.
2020. 20. Internationales Stuttgarter Symposium : Automobil- und Motorentechnik. Hrsg.: M. Bargende, 327–343, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-658-30995-4_32
Effects and Interactions of agile Principles in the Process of Mechatronic System Development: Building a basic Un- derstanding for adaptive Process Design
Albers, A.; Heimicke, J.; Trost, S.
2020. DS 101: Proceedings of NordDesign 2020, Lyngby, Denmark, 11th - 14th August 2020 - Balancing Innovation and operation - Ed.: N.H. Mortensen, 1–12, The Design Society. doi:10.35199/NORDDESIGN2020.22
Cross-Industry Sectoral Study:Interactions and Challenges of Requirements Engineering in the Early Phase of Product Development
Fahl, J.; Hirschter, T.; Maier, H.; Albers, A.
2020. Proceedings of NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020, 1–14, The Design Society. doi:10.35199/NORDDESIGN2020.58
Generic reference product model for specifying complex products by the example of the automotive industry
Albers, A.; Hirschter, T.; Fahl, J.; Woehrle, G.; Reinemann, J.; Rapp, S.
2020. Digital Proceedings of TMCE 2020, 353–370, Delft University of Technology (TU Delft)
Development of strategic guidelines for agile Parts Maturity Management of engine subsystems in the automotive industry during series ramp-up
Rapp, S.; Heimicke, J.; Weber, J.; Albers, A.
2020. Proceedings of NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020, The Design Society. doi:10.35199/NORDDESIGN2020.52
Smart education concept for product development teams in agile innovation projects
Niever, M.; Brandstetter, C.; Hahn, C.; Duehr, K.; Albers, A.
2020. Digital Proceedings of TMCE 2020 : 11-15 May, 2020, Dublin, Ireland / edited by I. Horváth and G. Keenaghan, 431–444, Delft University of Technology (TU Delft)
Alignment of the change to agile through method-supported evaluation of agile principles in physical product development
Albers, A.; Heimicke, J.; Trost, S.; Spadinger, M.
2020. 30th CIRP Design Conference, CIRP Design 2020, Pretoria, South Africa, 5 - 8 May 2020, 600–614, Elsevier. doi:10.1016/j.procir.2020.02.218
Developing a common understanding of business models from the product development perspective
Albers, A.; Basedow, G. N.; Heimicke, J.; Marthaler, F.; Spadinger, M.; Rapp, S.
2020. 30th CIRP Design Conference, CIRP Design 2020, Pretoria, South Africa, 5 - 8 May 2020, 875–882, Elsevier. doi:10.1016/j.procir.2020.03.122
Development of an integrated validation environment for System of Systems in the context of V2X using the XiL-Approach
Wäschle, M.; Jiang, Y.; Behrendt, M.; Albers, A.
2020. SOSE 2020 : IEEE 15th International Conference of System of Systems Engineering : proceedings : Budapest, Hungary, June 2-4, 2020, 343–348, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SoSE50414.2020.9130509
Proposing a Generalized Description of Variations in Different Types of Systems by the Model of PGE – Product Generation Engineering
Albers, A.; Rapp, S.; Fahl, J.; Hirschter, T.; Revfi, S.; Schulz, M.; Stürmlinger, T.; Spadinger, M.
2020. Proceedings of the Design Society: DESIGN Conference, 1, 2235–2244. doi:10.1017/dsd.2020.315
Benchmarking Of Risk Management Methods With Regard to Variations As A Source Of Risk
Rapp, S.; Altner, M.; Albers, A.
2020. Proceedings of the Design Society: DESIGN Conference, 1, 677–686. doi:10.1017/dsd.2020.292
Design Readiness Of Multi-Material Concepts: Manufacturing And Joining Technology Integrated Evaluation Of Concept Maturity Levels Using Cardinal Coefficients
Revfi, S.; Wilwer, J.; Behdinan, K.; Albers, A.
2020. Proceedings of the Design Society: DESIGN Conference, 1, 1067–1076. doi:10.1017/dsd.2020.274
Integrated use of scenario planning and strategic early warning systems to support product engineering processes
Meyer-Schwickerath, B.; Siebe, A.; Albers, A.
2020. 9th Nord Design Conference, NordDesign 2012; Aalborg University, Aalborg; Denmark; 22 August 2012 through 24 August 2012
Funktionsbasierte Entwicklung leichter Produkte
Albers, A.; Revfi, S.; Spadinger, M.
2020. Handbuch Leichtbau. Hrsg.: F. Henning, 133–152, Carl Hanser Verlag
Functional concepts in the model of PGE-product generation engineering by the example of automotive product development
Fahl, J.; Hirschter, T.; Kamp, J.; Endl, M.; Albers, A.
2020. 5th IEEE International Symposium on Systems Engineering, Proceedings October 2019, Article No. 8984552, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISSE46696.2019.8984552
Erweiterter Target Weighing Ansatz (ETWA): Semiquantitatives Bewertungsmodell für Herstellkosten neuer Konzeptideen
Revfi, S.; Gladysz, B.; Spadinger, M.; Albers, A.; Staeves, J.
2020. Konstruktion, 72 (01-02), 72–77
Tribological Performance Descriptions of Friction System in Synchronization for E-Powertrain
Chen, S.; Erdmann, K.; Bause, K.; Albers, A.
2020. Tribology - Industrial and Automotive Lubrication : 22nd International Colloquium Tribology, Ostfildern, 28 - 30 Januar 2020. Ed.: Arshia Fatemi, 271–272, Technische Akademie Esslingen (TAE)
Investigation of the Heat Distribution of Dry Friction Systems During Fade and Recovery Using Fiber Optic Sensing and Infra-Red Technology
Klotz, T.; Fink, C.; Ott, S.; Albers, A.
2020. Tribology - industrial and automotive lubrication : 22nd International Colloquium Tribology, Stuttgart/Ostfildern, 28-30 January 2020. Ed.: Arshia Fatemi, 289–290, Technische Akademie Esslingen (TAE)
A numerical approach for the determination of Archard’s wear coefficient
Joerger, A.; Albers, A.
2020. Tribology - industrial and automotive lubrication : 22nd International Colloquium Tribology, Stuttgart/Ostfildern, 28-30 January 2020. Ed.: Arshia Fatemi, 277–278
The contact and channel approach – 20 years of application experience in product engineering
Grauberger, P.; Wessels, H.; Gladysz, B.; Bursac, N.; Matthiesen, S.; Albers, A.
2020. Journal of engineering design, 31 (5), 241–265. doi:10.1080/09544828.2019.1699035
2019
A Systematic Approach to Model Objectives in Predevelopment Projects
Richter, T. O.; Albers, A.; Gesk, J. W.; Witt, J.-H.
2019. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1), 1363–1372. doi:10.1017/dsi.2019.142
Interdependencies Within the System of Objectives of a Product Generation in Industrial Practice
Albers, A.; Peglow, N.; Spadinger, M.
2019. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1), 1185–1194. doi:10.1017/dsi.2019.124
Future-oriented PGE-product Generation Engineering: An Attempt to Increase the Future User Acceptance through Foresight in Product Engineering Using the Example of the iPhone User Interface
Marthaler, F.; Stahl, S.; Siebe, A.; Bursac, N.; Spadinger, M.; Albers, A.
2019. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1), 3641–3650. doi:10.1017/dsi.2019.371
Function-Based Material Selection for Cross-Component Lightweight Design Within the Extended Target Weighing Approach
Revfi, S.; Kaspar, J.; Vielhaber, M.; Albers, A.
2019. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1), 2715–2724. doi:10.1017/dsi.2019.278
Comparison of Existing Agile Approaches in the Context of Mechatronic System Development: Potentials and Limits in Implementation
Heimicke, J.; Niever, M.; Zimmermann, V.; Klippert, M.; Marthaler, F.; Albers, A.
2019. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1), 2199–2208. doi:10.1017/dsi.2019.226
Interview Study on the Agile Development of Mechatronic Systems
Goevert, K.; Heimicke, J.; Lindemann, U.; Albers, A.
2019. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1), 2287–2296. doi:10.1017/dsi.2019.235
The Product Developer in the Centre of Product Development: A Systematic Literature Review on Describing Factors
Albers, A.; Heimicke, J.; Spadinger, M.; Degner, N.; Duehr, K.
2019. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1), 1843–1852. doi:10.1017/dsi.2019.190
Agile Lightweight Design - The Extended Target Weighing Approach in ASD - Agile Systems Design Using Functional Modelling with the C&C2-Approach
Albers, A.; Matthiesen, S.; Revfi, S.; Schönhoff, C.; Grauberger, P.; Heimicke, J.
2019. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1), 2667–2676. doi:10.1017/dsi.2019.273
The Reference System in the Model of PGE: Proposing a Generalized Description of Reference Products and their Interrelations
Albers, A.; Rapp, S.; Spadinger, M.; Richter, T.; Birk, C.; Marthaler, F.; Heimicke, J.; Kurtz, V.; Wessels, H.
2019. Proceedings of the 22nd International Conference on Engineering Design (ICED19), Delft, The Netherlands, 5-8 August 2019, 1693–1702, Delft. doi:10.1017/dsi.2019.175
Automated Driving - Challenges for the Automotive Industry in Product Development with Focus on Process Models and Organizational Structure
Pfeffer, R.; Basedow, G. N.; Thiesen, N. R.; Spadinger, M.; Albers, A.; Sax, E.
2019. 13th Annual IEEE International Systems Conference (SysCon 2019), Orlando, FL, April 8-11,2019, Article no: 8836779, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SYSCON.2019.8836779
Potentials for improving the system behaviour of highspeed clutches for BEV using optimal transmission springs
Gürbüz, H.; Ott, S.; Albers, A.
2019. 19th International VDI Congress Dritev - Drivetrain for Vehicles : July, 10 and 11, 2019, Bonn / VDI Wissensforum, VDI Verlag
Creating innovative products with reference system elements - a case study on approaches in practice
Richter, T.; Rapp, S.; Kurtz, V.; Romanov, V.; Albers, A.
2019. Procedia CIRP, 84, 804–809. doi:10.1016/j.procir.2019.04.259
Product generation 1 - High number of variations and how one efficiently secures this [Produktgeneration 1 – Hohe anzahl an variationen und wie man diese effizient absichert]
Ebertz, J.; Albers, A.; Bause, K.
2019. 30th Symposium Design for X, DFX 2019; Jesteburg; Germany; 18 September 2019 through 19 September 2019. Ed.: D. Krause, 37–48, The Design Society
Method for automated topology synthesis and evaluation of hybrid drivetrains [Methode zur automatisierten Topologiesynthese und Bewertung hybrider Antriebsstränge]
Ruoff, S.; Kalt, F.; Bause, K.; Albers, A.
2019. 30th Symposium Design for X, DFX 2019; Jesteburg; Germany; 18 September 2019 through 19 September 2019, 207–216, The Design Society
Initial reference process model for the engineering of validation environments comprising physical and virtual models
Yan, S.; Bi, L.; Behrendt, M.; Albers, A.
2019. Procedia CIRP, 84, 1075–1081
A Process-Related Topology Optimization Method to Design DiCoFRP Structures
Spadinger, M.; Albers, A.
2019. Continuous–Discontinuous Fiber-Reinforced Polymers : An Integrated Engineering Approach. Ed.: T. Böhlke, L. Kärger, 265–276, Carl Hanser Verlag
Development and evaluation of a method to estimate the probabilities of occurrence of environment-and system scenarios based on the valuation of trends and a Cross-Impact-Analysis
Marthaler, F.; Buchta, W.; Albers, A.; Bursac, N.
2019. 5th IEEE International Symposium on Systems Engineering, Proceedings October 2019, Article No. 8984561, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISSE46696.2019.8984561
Die nasslaufende Kupplung als Stellglied zur Schwingungsreduzierung im Antriebsstrang - Einflüsse eines veränderten Tribosystems
Bischofberger, A.; Ott, S.; Albers, A.
2019. 2. VDI-Fachtagung Schwingungen 2019 : Würzburg, 05. und 06. November / VDI-Gesellschaft Produkt- und Prozessgestaltung, 1 CD-ROM, VDI Verlag
Synthese von Beanspruchungskollektiven zur Erholung trockenlau-fender Friktionspaarungen und -systeme
Klotz, T.; Bauer, T.; Ott, S.; Albers, A.
2019. Reibung, Schmierung und Verschleiß: Forschung und praktische Anwendungen : 60. Tribologie-Fachtagung, 23. September bis 25. September 2019 in Göttingen, 182–189, Gesellschaft für Tribologie e.V. (GfT)
Methode zur automatisierten Topologiesynthese und Bewertung hybrider Antriebsstränge
Ruoff, S.; Kalt, F.; Bause, K.; Albers, A.
2019. DS 98: Proceedings of the 30th Symposium Design for X (DFX 2019), 18-19 September 2019, Jesteburg, Germany. Ed.: D. Krause, 207–216. doi:10.35199/dfx2019.18
A systematic approach to situation-adequate mechatronic system development by ASD - Agile Systems Design
Albers, A.; Heimicke, J.; Spadinger, M.; Reiss, N.; Breitschuh, J.; Richter, T.; Bursac, N.; Marthaler, F.
2019. Procedia CIRP, 84, 1015–1022. doi:10.1016/j.procir.2019.03.312
InnoBandit 2.0: A Systematic Approach to Scenario-Based Product Profile Generation in PGE – Product Generation Engineering
Marthaler, F.; Heimicke, J.; Ou, J.; Reiss, N.; Bursac, N.; Albers, A.
2019. Procedia CIRP, 84, 790–797. doi:10.1016/j.procir.2019.04.313
Function-based benchmarking to identify competitor-based lightweight design potentials
Albers, A.; Revfi, S.; Kraus, F.; Spadinger, M.
2019. Procedia CIRP, 84, 526–531. doi:10.1016/j.procir.2019.04.231
Methodical approach for the development of a platform for the configuration and operation of turnkey production systems
Gönnheimer, P.; Kimmig, A.; Mandel, C.; Stürmlinger, T.; Yang, S.; Schade, F.; Ehrmann, C.; Klee, B.; Behrendt, M.; Schlechtendahl, J.; Fischer, M.; Trautmann, K.; Fleischer, J.; Lanza, G.; Ovtcharova, J.; Becker, J.; Albers, A.
2019. Procedia CIRP, 84, 880–885. doi:10.1016/j.procir.2019.04.260
Accelerating Knowledge: The Speed Optimization of Knowledge Transfers
Grum, M.; Rapp, S.; Gronau, N.; Albers, A.
2019. Business Modeling and Software Design: 9th International Symposium, BMSD 2019, Lisbon, Portugal, July 1-3, 2019 - Proceedings. Ed.: B. Shishkov, 95–113, Springer. doi:10.1007/978-3-030-24854-3_7
Vergleich von Produktinnovationsarten – Worin die Unterschiede wirklich begründet liegen
Heimicke, J.; Zimmermann, V.; Klippert, M.; Spadinger, M.; Albers, A.
2019. Proceedings of Entwerfen - Entwickeln - Erleben. Produktentwicklung und Design 2019, Dresden, 27.-28. Juni 2019. Hrsg.: R.H. Stelzer, 165–180, TUDpress
Establishing innovation: Relevant process steps for the automotive predevelopment process
Wilmsen, M.; Groschopf, L.; Albers, A.
2019. R&D Management Conference 2019, Paris, F, June 17.-21, 2019
Einflussfaktoren in der standortverteilten Produktgenerationsentwicklung – Eine literaturbasierte Momentaufnahme
Duehr, K.; Kopp, D.; Walter, B.; Spadinger, M.; Albers, A.
2019. Proceedings of Entwerfen - Entwickeln - Erleben. Produktentwicklung und Design 2019, Dresden, 27.-28. Juni 2019. Hrsg.: R.H. Stelzer, 309–326, TUDpress
Agile Development of Mechatronic Systems: Utopia or Reality – an Evaluation from Industrial Practice
Zimmermann, V.; Heimicke, J.; Alink, T.; Dufner, Y.; Albers, A.
2019. 41st R&D Management Conference - The Innovation Challenge: Bridging Research, Industry and Society, Paris, France, 2019 June 17 - 21st
ASD – Agile Systems Design in Modular Design: Operationalization of agile Principles for cross-platform Agile-Boards
Heimicke, J.; Kaiser, K.; Albers, A.; Frei, C.; Muschik, S.; Birk, C.; Bursac, N.
2019. 41st R&D Management Conference - The Innovation Challenge: Bridging Research, Industry and Society, Paris, France, 2019 June 17 - 21st
Determining degrees of complexity of different development situations within business processes in engineering sector
Heimicke, J.; Freire, G.; Breitschuh, J.; Albers, A.
2019. 41st R&D Management Conference - The Innovation Challenge: Bridging Research, Industry and Society, Paris, France, 2019 June 17 - 21st
Manufacturing-oriented Bead Patterns for Long Fiber-Reinforced Polymer Structures
Revfi, S.; Spadinger, M.; Albers, A.
2019. NAFEMS World Congress 2019, Québec, CDN, June 17-20, 2019, NAFEMS
An Investigation of Use Cases for Customer-Integrated Product Validation
Reinemann, J.; Hirschter, T.; Fahl, J.; Hünemeyer, S.; Albers, A.
2019. R&D Management Conference 2019, Paris, F, June 17-21, 2019, 10
Entwicklungsgenerationen zur Steuerung der PGE – Produktgenerationsentwicklung: Von der Bauteil- zur Funktionsorientierung in der Automobilentwicklung
Albers, A.; Haug, F.; Heitger, N.; Fahl, J.; Hirschter, T.
2019. Stuttgarter Symposium für Produktentwicklung SSP 2019, Stuttgart, 16. Mai 2019. Hrsg.: H. Binz, 253–262, Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO
Identification of potentials in the context of Design for Industry 4.0 and modelling of interdependencies between product and production processes
Albers, A.; Stürmlinger, T.; Mandel, C.; Wang, J.; Baneres, M.; Behrendt, M.
2019. 29th CIRP Design Conference - Open Design and Design as Expontenial Technology, Póvoa de Varzim, P, May 8-10, 2019
Variations as Activity Patterns: A Basis for Project Planning in PGE – Product Generation Engineering
Albers, A.; Rapp, S.; Peglow, N.; Stürmlinger, T.; Heimicke, J.; Wattenberg, F.; Wessels, H.
2019. 29th CIRP Design Conference: open design and design as exponential technology, Póvoa de Varzim, Portugal, 8th to 10th May 2019
The Future of Innovation Coaching in Product Engineering: A Systematic Approach to Deriving the Future Competence Profile and its Development through Strategic Potential Identification
Niever, M.; Marthaler, F.; Kosejian, M.; Hahn, C.; Albers, A.
2019. 5th CERC 2019: Darmstadt, Germany, March 29-30, 2019, 299–310, Schloss Dagstuhl - Leibniz-Zentrum für Informatik (LZI)
Methods and Processes for Robust Mass Properties Management in the Automotive Industry with a main Focus on Weight Uncertainties
Stegmiller, M.; Albers, A.
2019. 78th SAWE International Conference on Mass Properties Engineering, Hilton Norfolk - "The Main" Norfolk, Virginia, USA, May 18-23, 2019, 18
Agility and its Features in Mechatronic System Development: A Systematic Literature Review
Albers, A.; Heimicke, J.; Müller, J.; Spadinger, M.
2019. 30th ISPIM Innovation Conference, Forence, I, June 16-19, 2019
Augmented Reality in der Produktvalidierung: Potenziale und Grenzen in frühen Entwicklungsphasen
Reinemann, J.; Fahl, J.; Hirschter, T.; Albers, A.
2019. 5th International Conference on Electrical Engineering and Electronics (EEE’19), Lissabon, P, August 21 - 23, 2019
Augmented Reality for Product Validation: Supporting the Configuration of AR-Based Validation Environments
Albers, A.; Reinemann, J.; Hirschter, T.; Fahl, J.
2019. Virtual, Augmented and Mixed Reality : Applications and Case Studies. 11th International Conference, VAMR 2019 Held as Part of the 21st HCI International Conference, HCII 2019 Orlando, FL, USA, July 26–31, 2019 Proceedings, Part II. Ed. J.Y.C. Chen, 429–448, Springer. doi:10.1007/978-3-030-21565-1_29
Identification of Indicators for the Selection of Agile, Sequential and Hybrid Approaches in Product Development
Albers, A.; Hirschter, T.; Fahl, J.; Reinemann, J.; Spadinger, M.; Hünemeyer, S.; Heimicke, J.
2019. 29th CIRP Design Conference - Open Design and Design as exponential technology, Póvoa de Varzim, P, May 8-10, 2019
Validation-Driven Design in the Early Phase of Product Development
Albers, A.; Reinemann, J.; Hirschter, T.; Fahl, J.; Heitger, N.
2019. Procedia 29th CIRP Design Conference, Póvoa de Varzim, P, May 8-10, 2019
Acceptance Modelling in Product Development – Case Study: Connected Systems for Industry 4.0 Solutions
Zimmermann, V.; Heimicke, J.; Albers, A.; Reiß, N.
2019. IOP conference series / Materials science and engineering, 520 (1), Art. Nr.: 012011. doi:10.1088/1757-899X/520/1/012011
Das Referenzsystem im Modell der PGE – Produktgenerationsentwicklung: Vorschlag einer generalisierten Beschreibung von Referenzprodukten und ihrer Wechselbeziehungen
Albers, A.; Rapp, S.; Spadinger, M.; Richter, T.; Birk, C.; Marthaler, M.; Heimicke, J.; Kurtz, V.; Wessels, H.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000093227
Entwicklungsansätze für innovative Hochdrehzahlkupplung in E-Fahrzeugen
Gürbüz, H.; Ott, S.; Albers, A.
2019. VDI Kupplungen und Kupplungssysteme in Antrieben 2019, Ettlingen bei Karlsruhe, 26.-27.03.2019
Vergleich von Reibungszahlverläufen von nasslaufenden Friktionskontakten im gezielten Schlupfbetrieb unter dynamischer Anregung
Kemper, C.; Ott, S.; Albers, A.
2019. Kupplungen und Kupplungssysteme in Antrieben, Ettlingen bei Karlsruhe, 26.03. - 27.03.2019, VDI Fachmedien
Automated Driving – Challenges for the Automotive Industry in Product Development with Focus on Process Models and Organizational Structure
Pfeffer, R.; Basedow, G. N.; Thiesen, N.; Spadinger, M.; Albers, A.; Sax, E.
2019. 13th Annual IEEE International Systems Conference, SYSCON 2019, Orlando, Florida, 8th-11th April 2019, 6
Das Phänomen der Erholung
Klotz, T.; Ott, S.; Albers, A.
2019. VDI white paper, VDI Fachmedien
Herausforderungen bei der Entwicklung von smarten Produktionsmaschinen im Kontext des Modells der PGE – Produktgenerationsentwicklung
Albers, A.; Basedow, G.; Spadinger, M.; Raab, F.; Chen, J.; Stürmlinger, T.
2019. Stuttgarter Symposium für Produktentwicklung 2019, SSP 2019, 15.-16.5.2019, Stuttgart, 9, Fraunhofer IAO
Eine Systematik zur situationsadäquaten Mechatroniksystementwicklung durch ASD - Agile Systems Design
Albers, A.; Heimicke, J.; Spadinger, M.; Reiß, N.; Breitschuh, J.; Richter, T.; Bursac, N.; Marthaler, F.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000091847
2018
Detection of Intermediates in Dual Gold Catalysis Using High-Resolution Ion Mobility Mass Spectrometry
Greisch, J.-F.; Weis, P.; Brendle, K.; Kappes, M. M.; Haler, J. R. N.; Far, J.; De Pauw, E.; Albers, C.; Bay, S.; Wurm, T.; Rudolph, M.; Schulmeister, J.; Hashmi, A. S. K.
2018. Organometallics, 37 (9), 1493–1500. doi:10.1021/acs.organomet.8b00128
Die Bedeutung von Industrie 4.0 in der Produktentwicklung: Design for und Design with Industrie 4.0 im Kontext der PGE - Produktgenerationsentwicklung
Albers, A.; Stürmlinger, T.; Bause, K.; Behrendt, M.; Mandel, C.
2018. News / Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP, Berliner Kreis & WGMK, (2), 21–22
Agile innovative impulses in product generation engineering: Creativity by intentional forgetting
Heimicke, J.; Reiß, N.; Albers, A.; Walter, B.; Breitschuh, J.; Knoche, S.; Bursac, N.
2018. ICDC 2018: 5th International Conference on Design Creativity, 31st January to 2nd February 2018, Bath, UK - Conference Proceedings. Ed.: E. Dekoninck, 183–190, The Design Society
A Training Framework for the Synthesis of a Consistent System of Objectives in Modular Design
Richter, T.; Albers, A.; Birk, C.; Rapp, M.; Bursac, N.
2018. Procedia CIRP, 70, 398–403. doi:10.1016/j.procir.2018.02.035
Using Artificial Neural Networks in a methodical approach to develop suitable classification systems of Acoustic Emission data generated in tribological contacts
Wantzen, K.; Stürmlinger, T.; Joerger, A.; Albers, A.
2018. AEWG-60: 60th Meeting Announcement, Charleston, SC, June 19-20, 2018
Zukunftsorientierte PGE – Produktgenerationsentwicklung: Ein Ansatz zur systematischen Überführung von Szenarien in Produktprofile in der Frühen Phase der PGE
Hirschter, T.; Heitger, N.; Haug, F.; Fahl, J.; Mandel, C.; Marthaler, F.; Walter, B.; Albers
2018. Vorausschau und Technologieplanung: 14. Symposium für Vorausschau und Technologieplanung (SVT), Berlin, 8.-9. November 2018. Hrsg.: J. Gausemeier, 20, Heinz Nixdorf Institut
SLM-Topo – A topology optimization method for additive manufacturing of lightweight design structures using the selective laser melting process
Albers, A.; Holoch, J.; Dietrich, S.; Spadinger, M.
2018. Exploring the Design Freedom of Additive Manufacturing through Simulation, Helsinki, FIN, December 10-11, 2018, 62–63
Scaling agile practices on different time scopes for complex problem-solving
Breitschuh, J.; Albers, A.; Seyb, P.; Hohler, S.; Benz, J.; Reiß, N.; Bursac, N.
2018. Proceedings of NordDesign 2018, Linköping, Sweden, 14th - 17th August 2018. Ed.: P. Ekströmer, 1–12
Customer-oriented product development: supporting the development of the complete vehicle through the systematic use of engineering generations
Albers, A.; Haug, F.; Fahl, J.; Hirschter, T.; Reinemann, J.; Rapp, S.
2018. 4th IEEE International Symposium on Systems Engineering (ISSE 2018), Rome, I, October 1-3, 2018, Article no: 8544391, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SysEng.2018.8544391
Development of an improved simulation method for determining the vibrational behaviour of the electric motor in Hybrid-electric automotive applications
Shahfir, A.; Lieske, D.; Bikker, S.; Albers, A.; Behrendt, M.
2018. 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering, INTER-NOISE 2018; Marriott Magnificent Mile DowntownChicago; United States; 26 August 2018 through 29 August 2018, 2706–2717, INCE
How do C&C-models improve the understanding of system behaviour in failure analysis?
Gladysz, B.; Megner, T.; Mayer, M. P.; Albers, A.
2018. Proceedings of NordDesign: Design in the Era of Digitalization, NordDesign 2018, The Design Society
Identifying expedient variations in PGE - Product generation engineering
Rapp, S.; Moeser, G.; Eichhorn, P.; Albers, A.
2018. Proceedings of NordDesign: Design in the Era of Digitalization, NordDesign 2018, The Design Society
Managing Systems of Objectives in the agile Development of Mechatronic Systems by ASD - Agile Systems Design
Albers, A.; Heimicke, J.; Hirschter, T.; Richter, T.; Reiß, N.; Maier, A.; Bursac, N.
2018. Proceedings of NordDesign: Design in the Era of Digitalization, NordDesign 2018, The Design Society
The world is complex therefore our research is needed - Using data mining for literature reviews
Albers, A.; Bursac, N.; Butenko, V.; Marthaler, F.; Zhang, Q.
2018. 15th International Design Conference, DESIGN 2018; Dubrovnik; Croatia; 21 May 2018 through 24 May 2018. Ed.: N. Bojcetic, 1–12, The Design Society. doi:10.21278/idc.2018.0470
PGE-Produktgenerationsentwicklung und Zukunftsvorausschau: Eine systematische Betrachtung zur Ermittlung der Zusammenhänge
Albers, A.; Dumitrescu, R.; Marthaler, F.; Albers, A.; Kuehfuss, D.; Strauch, M.; Siebe, A.; Bursac, N.
2018. 14. Symposium für Vorausschau und Technologieplanung, Berlin, 8.-9.11.2018, 23
Methodische Unterstützung zur Produktvalidierung in AR-Umgebungen in der Frühen Phase der PGE – Produktgenerationsentwicklung
Reinemann, J.; Hirschter, T.; Mandel, C.; Heimicke, J.; Albers, A.
2018. 29. DfX-Symposium 2018, Tutzing, 25.-26. September 2018. Hrsg.: D. Krause, 14
SchooLab - Product Development in ASD - Agile Systems
Heimicke, J.; Marthaler, F.; Albers, A.; Hake, N.
2018. ICL2018 – The Challenges of the Digital Transformation in Education. 21th International Conference on Interactive Collaborative Learning, Kos Island, GR, September 25-28, 2018. Ed.: G. Auer
A Two-Dimensional Perspective on the Virtualization of Validation for Electrified Powertrain Generations
Dudin, N.; Ott, S.; Albers, A.; Rainer, M.; Oberting, A.
2018. 31. International Vehicles Syposium and Exhibition and International Vehicle Technology Conference 2018 (EVS31), Kobe, J, September 30 - October 3, 2018, 12
Methodischer Ansatz zur Bewertung und Auswahl einer Validierungsumgebung [in press]
Yan, S.; Nickel, D.; Behrendt, M.; Albers, A.
2018. 29. DfX-Symposium, Tutzing, Germany, 25.- 26. September 2018. Hrsg.: D. Krause, 12, Tutech Verlag
Untersuchung des Einflusses der Einlaufprozedur auf das Reibungs- und Verschleißverhalten von geschmierten Kontakten mit der Finite-Elemente-Methode
Joerger, A.; Albers, A.; Reichert, S.
2018. 59. Tribologie-Fachtagung Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen (Friction, Lubrication and Wear - Research and Practical Applications) (2018), Göttingen, Germany, September 24–26, 2018
How embodiment design and function based analysis influences the effeciency and effectiveness in the failure cause and effect analysis
Albers, A.; Gladysz, B.
2018. 13th Biennial Norddesign Conference, NordDesign 2018; Linkoping; Sweden; 14 August 2018 through 17 August 2018
Model-based design guidelines for better knowledge transfer into industrial applications
Butenko, V.; Gladysz, B.; Albers, A.
2018. NordDesign, Linköping, S, August 14-17, 2018
Development methods for 2030: An interpretation of scenarios in the application of methods
Albers, A.; Marthaler, F.; Reiss, N.; Hirschter, T.
2018. NordDesign, Linköping, S, August 14-17, 2018
PGE – Product generation engineering in engineering education: Real-world problems for beginners in student projects
Albers, A.; Matthiesen, S.; Rapp, S.; Hoelz, K.; Bursac, N.
2018. 20th International Conference on Engineering and Product Design Education (E&PDE 2018), London, UK, September 6-7, 2018
Schwingungsentkopplung durch nasslaufende Funktionsreibkontakte im geregelten Schlupfbetrieb – Anforderungen an den tribologischen Kontakt in Wechselwirkung mit der Antriebssystemdynamik
Kemper, C.; Basiewicz, M.; Ott, S.; Albers, A.
2018. 59. Tribologie-Fachtagung Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen (Friction, Lubrication and Wear - Research and Practical Applications) (2018), Göttingen, Germany, September 24–26, 2018
IP-Integrated Product Development Project’s Decision-Making Leads to Heuristic Behaviour
Tanaiutchawoot, N.; Rapp, S.; Bursac, N.; Albers, A.
2018. 2018 IEEE International Conference on Engineering, Technology and Innovation, ICE/ITMC 2018; Stuttgart; Germany; 17 June 2018 through 20 June 2018, Art. Nr.: 8436278, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICE.2018.8436278
Extended Target Weighing Approach – A system lightweight design approach for new product generations
Revfi, S.; Albers, A.; Holoch, J.; Spadinger, M.
2018. Book of Abstracts – Symposium Lightweight Design in Product Development (LWD-PD18), Zürich, Switzerland, 14th–15th June 2018, 29–31, ETH Zürich
Target Weighing Approach: Study to evaluate the benefits of a methodical approach in comparison to classical company processes for the identification of lightweight design potentials
Revfi, S.; Albers, A.; Stegmiller, M.
2018. Proceedings of NordDesign: Design in the Era of Digitalization, NordDesign 2018, The Design Society
Influencing factors and methods for knowledge transfer situations in Product Generation Engineering based on the SECI model
Albers, A.; Gronau, N.; Rapp, S.; Grum, M.; Zaiser, A.; Bursac, N.; Weber, E.
2018. NordDesign, Linköping, Sweden, August 14 - 17, 2018
Identifying Expedient Variations in PGE – Product Generation Engineering
Rapp, S.; Moeser, G.; Eichhorn, P.; Albers, A.
2018. 13th Biennial Norddesign Conference, NordDesign 2018; Linkoping; Sweden; 14 August 2018 through 17 August 2018, The Design Society
Virtualizing Validation Processes of Electrified Powertrain Generations
Dudin, N.; Ott, S.; Albers, A.; Misch, R.; Rochlitzer, T.
2018. International VDI Congress Dritev - Drivetrain for vehicles, EDrive, Transmissions in mobile machines : Bonn, Germany, June 27 - 28 2018, 593–618, VDI Verlag
Experimental determination and identification of temporary fade limits of dry friction pairings
Albers, A.; Ott, S.; Klotz, T.
2018. 45th Leeds-Lyon Symposium on Tribology (2018), Leeds, United Kingdom, September 4–7, 2018
Experimentelle Ermittlung und Identifizierung der temporären Schädigungsgrenze trockenlaufender Friktionspaarungen
Klotz, T.; Ott, S.; Albers, A.
2018. 59. Tribologie-Fachtagung Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen (Friction, Lubrication and Wear - Research and Practical Applications) (2018), Göttingen, Germany, September 24–26, 2018
Erste Versuchsergebnisse aus der Entwicklung eines Dünnschichtsensors zur Messung der Temperatur im tribologischen Kontakt unter Mischreibung
Wantzen, K.; Pavlides, C.; Poltorak, C.; Ulrich, S.; Albers, A.
2018. 20./17. Arbeitstagung Angewandte Oberflächenanalytik / Jahrestagung der DVG e.V. Kaiserslautern (AOFA 2018), Kaiserslautern, Germany, September 3–5, 2018
Entwicklung verlustoptimierter Kupplungssysteme für elektrifizierte Antriebe. Methoden zur Gestaltung, Auslegung und Bewertung
Albers, A.; Ott, S.; Bause, K.; Basiewicz, M.; Denda, C.; Reichert, U.
2018. Mitteilungen der WiGeP, (1), 12–13
Supporting digital transformation through adapting product profiles to the requirements on in-house innovation – a case study in the energy sector
Walter, B.; Seidel, S.; Albers, A.; Meier, S.; Wunsch, M.; Bursac, N.
2018. 40th R&D Management Conference 2018, Milano, I, June 30 - July 4, 2018
Supporting Potential Innovation in the Early Phase of PGE – Product Generation Engineering: Structuring the Development of the Initial System of Objectives
Albers, A.; Heitger, N.; Haug, F.; Fahl, J.; Hirschter, T.; Bursac, N.
2018. R&D Management Conference, Milano, I, June 30 - July 4, 2018, 13
Improving R&D Success: Exploring modeling approaches for product profiles
Basedow, G.; Heimicke, J.; Albers, A.; Wilmsen, M.; Marthaler, F.
2018. 40th R&D Management Conference 2018, Milano, I, June 30 - July 4, 2018
New Technologies: The Vicious Circle of Immature Product Development Processes
Ebertz, J.; Albers, A.; Bause, K.
2018. R&D Management Conference 2018, Milano, I, June 30 - July 4, 2018
A methodical approach to develop suitable classification systems of acoustic emission data generated in tribological contacts
Wantzen, K.; Stürmlinger, T.; Albers, A.; Wei, C.
2018. The 18th Nordic Symposium on Tribology (Nordtrib 2018), Uppsala, S, June 18-21, 2018
A numerical approach to investigate the influence of the running-in procedure on friciton and wear in mixed-lubricated contacts
Albers, A.; Reichert, S.
2018. The 18th Nordic Symposium on Tribology (NORDTRIB 2018), Uppsala, S, June 18-21, 2018
Extended Target Weighing Approach – Estimation of Technological Uncertainties of Concept Ideas in Product Development Processes
Albers, A.; Revfi, S.; Spadinger, M.
2018. 2nd CO2 Reduction for Transportation Systems Conference, CO2 2018, Turin, I, June 6-8, 2018. doi:10.4271/2018-37-0028
Investigation of the thermo-mechanical behaviour of clutches using fibre optic sensing technology with high spatial measurement density
Albers, A.; Ott, S.; Kniel, J.; Eisele, M.; Basiewicz, M.
2018. Proceedings of the Institution of Mechanical Engineers / J, 232 (1), 26–35. doi:10.1177/1350650117740011
System of systems approach for the description and characterization of validation environments
Albers, A.; Mandel, C.; Yan, S.; Behrendt, M.
2018. Design 2018 : proceedings of the 15th International Design Conference, May 21-24, 2018, Dubrovnik, Croatia. Vol. 6. Ed.: D. Marjanović, 2799–2810, Univ. doi:10.21278/idc.2018.0460
Developing R&D-Strategies for Future Innovations: Activities in the Context of Technological Transformation and PGE – Product Generation Engineering
Arslan, M.; Bursac, N.; Killer, B.; Albers, A.
2018. R&D Management Conference, Milano, I, June 30 - July 4, 2018, 19
THE WORLD IS COMPLEX THEREFORE OUR RESEARCH IS NEEDED – USING DATA MINING FOR LITERATURE REVIEWS
Albers, A.; Bursac, N.; Butenko, V.; Marthaler, F.; Zhang, Q.
2018. DESIGN 2018 - 15th International Design Conference, Dubrovnik, HR, May 21-24, 2018, 12
How do c&c²-models improve efficiency, comprehensibility and scope in failure analysis - an empirical study based on two live-labs
Gladysz, B.; Albers, A.
2018. International Design Conference - Design 2018, Dubrovnik, HR, May 21-24, 2018, 1127–1138. doi:10.21278/idc.2018.0497
A co-creation approach to identifying vehicle-sharing concepts for future markets [in press]
Walter, B.; Storer, D.; Albers, A.; Barberi, C.
2018. Proceedings of 7th Transport Research Arena TRA 2018, Vienna, Austria, 16 - 19 April 2018
PITCH 2.0 – concept of early evaluation of product profiles in product generation engineering
Richter, T.; Heimicke, J.; Reiß, N.; Breitschuh, J.; Albers, A.; Gutzeit, M.; Walter, B.; Bursac, N.
2018. Tools and Methods of Competitive Engineering. Ed.: I. Horvath, Delft University of Technology (TU Delft)
Efficient Cause and Effect Analysis for NVH Phenomena of Electric Vehicles on an Acoustic Roller Test Bench
Albers, A.; Bopp, M.; Behrendt, M.
2018. ISNVH Proceedings 2018. 10th International Styrian Noise, Vibration and Harshness Congress, Graz, A, 20.-22. Juni 2018, SAE International
Reference Products in PGE – Product Generation Engineering: Analyzing Challenges Based on the System Hierarchy
Albers, A.; Rapp, S.; Heitger, N.; Wattenberg, F.; Bursac, N.
2018. Procedia CIRP, 70, 469–474. doi:10.1016/j.procir.2018.02.046
Design with Industry 4.0 – Priorization of Sensor data for a smart data driven Product Development Process
Stürmlinger, T.; Gladysz, B.; Strauch, M.; Albers, A.
2018. Tools and methods of competitive engineering : proceedings of theTwelfth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2018, May 07-11, Las Palmas de Gran Canaria, Spain. Proceedings of TMCE 2018, Las Palmas de Gran Canaria, Gran Canaria, Spain,7-11 May 2018. Ed.: Imre Horváth, 439–450, Delft University of Technology (TU Delft)
Agile method development: A Live-Lab case study on product properties for process planning
Albers, A.; Bursac, N.; Eckert, C. M.; Walter, B.; Wilmsen, M.; Heimicke, J.
2018. Design 2018 : proceedings of the 15th International Design Conference, May 21-24, 2018, Dubrovnik, Croatia. Vol. 2. Ed.: D. Marjanović, 713–724, Univ. doi:10.21278/idc.2018.0341
Live-Labs as real-world validation environments for design methods
Albers, A.; Walter, B.; Wilmsen, M.; Bursac, N.
2018. Design 2018 - 15th International Design Conference, Dubrovnik, HR, May 21-24, 2018, 13–24. doi:10.21278/idc.2018.0303
How to foster innovation? Findings and hypotheses for collaborations between research and industry
Sahin, T.; Cudok, A.; Rapp, S.; Inkermann, D.; Albers, A.; Wattenberg, F.; Bursac, N.; Vietor, T.
2018. DS 92: Proceedings of the DESIGN 2018, 15th International Design Conference 2018, Dubrovnik, Croatia, May, 21-24 2018, 1945–1956. doi:10.21278/idc.2018.0484
Parametrische Optimierung auf Komponentenebene als Basis für einen Optimierungsprozess auf Gesamtfahrzeugebene im Thermomanagement
Schulz, M.; Albers, A.
2018. Proceedings of the NAFEMS 18 DACH Conference, Bamberg, 14-16 May, 175–178
Integration von Fertigungsrandbedingungen in die Sizing Optimierung
Heldmaier, S.; Reichert, S.; Li, S.; Albers, A.
2018. Deutschsprachige NAFEMS Konferenz 2018 : Berechnung und Simulation - Anwendungen, Entwicklungen, Trends : mit Forum "Additive Fertigung" : 14.-16. Mai 2018, Bamberg, Deutschland, NAFEMS GmbH
Entwicklung einer Prüfumgebung zur Untersuchung des stelbsttätigen Lösens der Radverschraubung von Kraftfahrzeugen – Dynamischer Radfestsitz [in press]
Choudhry, A.; Albers, A.; Bause, K.
2018. 6. VDI-Fachtagung Schraubenverbindung 2018, Würzburg, 21. - 22. November 2018
Methods and processes for robust weight management in the automotive industry
Stegmiller, M.; Albers, A.; Bursac, N.
2018. 18. Internationales Stuttgarter Symposium - Automobil- und Motorentechnik. Hrsg.: M. Bargende, 61–76, Vieweg Verlag
EXPERIENCE SCENARIOS TO STIMULATE CREATIVITY – GENERATING SOLUTIONS IN THE SYSTEM OF SYSTEMS OF SEAMLESS MOBILITY
Albers, A.; Grunwald, A.; Marthaler, F.; Reiß, N.; Bursac, N.
2018. The 5the International Conference on Design Creativity, Bath, UK, January 31 - February 2, 2018
Connected Testbeds – Early Validation in a Distributed Development Environment
Nickel, D.; Behrendt, M.; Bause, K.; Albers, A.
2018. 18. Internationales Stuttgarter Symposium: Automobil- und Motorentechnik. Hrsg.: Michael Bargende, Hans-Christian Reuss, Jochen Wiedemann, 1173–1185, Vieweg Verlag
Product Profiles: Modelling customer benefits as a foundation to bring inventions to innovations
Albers, A.; Heimicke, J.; Walter, B.; Basedow, G. N.; Reiß, N.; Heitger, N.; Ott, S.; Bursac, N.
2018. Procedia CIRP, 70, 253–258. doi:10.1016/j.procir.2018.02.044
A project monitoring methodology for distributed product generation engineering
Walter, B.; Duehr, K.; Bursac, N.; Albers, A.
2018. Proceedings of the TMCE 2018, Las Palmas de Gran Canaria, E, May 7-11, 2018
Agile Innovative Impulses in Product Generation Engineering Creativity by Intentional Forgetting
Heimicke, J.; Reiß, N.; Albers, A.; Walter, B.; Breitschuh, J.; Knoche, S.; Bursac, N.
2018. 5th International Conference on Design Creativity, Bath, UK, 31st January to 2nd February 2018, 8
20 Years of Co-creation Using Case Based Learning : An Integrated Approach for Teaching Innovation and Research in Product Generation Engineering
Albers, A.; Bursac, N.; Heimicke, J.; Walter, B.; Reiß, N.
2018. Teaching and Learning in a Digital World : Proceedings of the 20th International Conference on Interactive Collaborative Learning, Volume 2, Budapest, Hungary, 27th - 29th September 2017. Ed.: M. E. Auer, 636–647, Springer. doi:10.1007/978-3-319-73204-6_69
2017
Entscheidungsheuristiken in der PGE – Produktgenerationsentwicklung
Krause, D.; Paetzold, K.; Bursac, N.; Rapp, S.; Albers, A.; Breitschuh, J.; Tanaiutchawoot, N.
2017. Design for X : Beiträge zum 28. DfX-Symposium, Oktober 2017, Bamberg, 2017.10.04-05. Hrsg.: D. Krause, 275–286, Tutech Verlag
The effect of annealing on mechanical properties and constitution of TiC:H and TiC/a-C:H thin films deposited by high power impulse magnetron sputtering
Poltorak, C.; Leiste, H.; Mikulla, C.; Rinke, M.; Wantzen, K.; Pavlides, C.; Burger, W.; Albers, A.; Stüber, M.; Ulrich, S.
2017. 8th International Conference on Fundamentals and Applications of HIPIMS (2017), Brunswick, Germany, June 13–14, 2017
Design Guidelines 2.0 to support design process of fibre-reinforced plastics
Butenko, V.; Gladysz, B.; Nicolini, M.; Albers, A.
2017. SAMPE Europe Conference 2017 Stuttgart, Leinfelden-Echterdingen, 14. - 16. November 2017
Das Methoden Spiel SPALTEN Expedition: Akzeptanzsteigerung durch Erfahrungen und Erfolgserlebnisse
Reiß, N.; Albers, A.; Janke, M.; Popp, F.; Bursac, N.
2017. Stuttgarter Symposium für Produktentwicklung 2017
Effizientere Validierung und Funktionsabsicherung von Fahrerassistenzsystemen auf dem Rollenprüfstand
Lutz, S.; Albers, A.; Hettel, R.; Behrendt, M.
2017. Interdisziplinäre Produktentwicklung. 15. Gemeinsames Kolloquium Konstruktionstechnik, 2017, Duisburg, 05.- 06. Oktober 2017. Ed.: K. Brökel, Universität Duisburg-Essen
Szenarien der Methodenanwendung - Ein Whitepaper für die Methodenforschung
Albers, A.; Bursac, N.; Marthaler, F.; Reiß, N.; Siebe, A.; Bender, B.; Binz, H.-G.; Krause, D.; Lachmayer, R.; Matthiesen, S.; Vietor, T.
2017. Konstruktion, 69 (11/12), 72–77
Influencing factors on the decoupling of induced rotational oszillation by wet-running multi-plate packages in controlled slip mode
Albers, A.; Ott, S.; Basiewicz, M.
2017. 44th Leeds Lyon - Symposium on Tribology - Tribomotion: Where Performance and motion meets friction, Lyon, France, September 4-6, 2017
Influence of process parameters on the formability of bead stamping part using advanced models
Cha, W.; Müller, S.; Bursac, N.; Albers, A.; Volk, W.
2017. Journal of physics / Conference Series, 896 (1), Art.Nr. 012005. doi:10.1088/1742-6596/896/1/012005
XiL-BW-e – Laboratory Network Baden-Württemberg for Electric Mobility
Albers, A.; Dietmayer, K.; Bargende, M.; Behrendt, M.; Yan, S.; Buchholz, M.; Zaiser, S.; Rößler, A.; Bernthaler, T.
2017. The 30th International Electric Vehicle Symposium & Exhibition, Stuttgart, October 9-11, 2017
A function- and embodiment-based failure analysis method for an in-depth understanding of failure mechanisms
Gladysz, B.; Spandl, L.; Albers, A.
2017. 21st International Conference on Engineering Design (ICED), Vancouver, Canada, 21-25.08.2017. Vol 4. Ed.: A. Maier, 239–248, The Design Society
A new approach for the investigation of synchronizations by different shifting characteristics
Albers, A.; Reichert, U.; Wolter, K.; Pinner, T.; Ott, S.
2017. 17th International VDI Congress – Drivetrain for Vehicles, Bonn, Germnay, 5 - 6 July 2017, VDI Fachmedien
Efficient application of MBSE using reference models: a PGE case study
Müller, M.; Schiffbänker, P.; Albers, A.; Braun, A.; Bursac, N.
2017. 21st International Conference on Engineering Design, ICED 2017; Vancouver; Canada; 21 - 25 August 2017. Vol.: 3, 271–280
Kopplung von CAE-Methoden zur Unterstützung des Produktentwicklers
Albers, A.; Reichert, S.; Serf, M.; Thorén, S.; Bursac, N.
2017. Konstruktion, 69 (9), 76–82
Investigation of roughness parameters of real rough surfaces due to sliding wear under mixed-lubricated conditions with the finite-element-method
Albers, A.; Reichert, S.; Joerger, A.
2017. 6th World Tribology Congress 2017, Beijing, China, September 17-22 2017
A simple method to investigate variations in electric conductivity of thin-layer coatings
Wantzen, K.; Pavlides, C.; Albers, A.
2017. WTC 2017 : 6th World Tribology Congress, Beijing, China, September 17 - 22, 2017
Verification of a New Sound Power Measuring Method and Application to Vehicle Component Testing
Behrendt, M.; Landes, D.; Albers, A.
2017. INTER-NOISE - 46th International Congress and Exposition on Noise Control Engineering, Hong Kong, China, 27 - 30 August, 2017
Vernetzen von freien Skizzen in SysML - Systemmodellen zur Unterstützung der Konstrukteurstätigkeit
Albers, A.; Moeser, G.; Salihoglu, M.
2017. 15. Gemeinsames Kolloquium Konstruktionstechnik 2017 – Interdisziplinäre Produktentwicklung, Duisburg, 05.10. – 06.10.2017. Hrsg.: K. Brökel, 161–170, Universität Duisburg-Essen
Application of Artificial Neural Networks for Editing Measured Acoustical Data for Simulations in Virtual Environments
Siegel, A.; Weber, C.; Albers, A.; Landes, D.; Behrendt, M.
2017. Engineering for a changing worldEngineering for a changing world : 59th IWK, Ilmenau Scientific Colloquium, September 11-15, 2017, 110, Universitätsverlag Ilmenau
Kreativitätsmethoden im digitalen Umfeld - Aktive Förderung von Innovationsimpulsen in standortverteilten Entwicklungsteams
Walter, B.; Klippert, M.; Kunz, M.; Albers, A.; Reiß, N.
2017. 15. Gemeinsames Kolloquium Konstruktionstechnik: Interdisziplinäre Produktentwicklung, Duisburg, 05.10. – 06.10.2017. Hrsg.: K. Brökel, 267–276, Universitätsbiblithek. doi:10.17185/duepublico/44616
Simulation of acoustic product properties in virtual environments based on artificial neural networks (ANN)
Siegel, A.; Weber, C.; Albers, A.; Landes, D.; Behrendt, M.
2017. Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 4 : Design Methods and Tools, Vancouver, Canada, 21st - 25th August 2017. Ed.: A. Maier, 573–582, The Design Society
Extended target weighing approach : Identification of lightweight design potential for new product generations
Albers, A.; Revfi, S.; Spadinger, M.
2017. Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 4 : Design Methods and Tools, Vancouver, Canada, 21st - 25th August 2017. Ed.: A. Maier, 367–376, The Design Society
A qualitative study to identify the need and requirements on further development of design guidelines for fibre-reinforced composites
Butenko, V.; Wilwer, J.; Spadinger, M.; Albers, A.
2017. 21st International Conference on Engineering Design, ICED 2017, Vancouver, Canada, 21st - 25th August 2017. Ed.: A. M. Maier, 309–318, The Design Society
Improved codification and transfer of engineering knowledge through human intermediaries
Ruck, T.; Albers, A.; Reiß, N.
2017. 21st International Conference on Engineering Design, ICED 2017; University of British Columbia (UBC) CampusVancouver; Canada; 21 August 2017 through 25 August 2017. Ed.: F.Salustri, 257–266, The Design Society
Understanding Design Methods – Using Explanatory Videos for Knowledge Transfer in Engineering Disciplines
Reiß, N.; Bavendiek, A.-K.; Diestmann, G.; Inkermann, D.; Albers, A.; Vietor, T.
2017. Procedia CIRP, 60, 518–523. doi:10.1016/j.procir.2017.01.033
Validation environment for function development and coverage of ADAS in the car development process
Albers, A.; Lutz, S.; Behrendt, M.; Düser, T.; Hettel, R.
2017. 17. Internationales Stuttgarter Symposium : Automobil- und Motorentechnik, Stuttgart, 14.-15. März 2017. Ed.: M. Bargende, 311–322, Vieweg Verlag. doi:10.1007/978-3-658-16988-6_87
ProVIL : Produktentwicklung im virtuellen Ideenlabor : Anwendungs- und Implementierungsmodell eines Live-Labs
Walter, B.; Albers, A.; Benesch, G.; Bursac, B.
2017. 4. Stuttgarter Symposium für Produktentwicklung 2017 (SSP) : Produktentwicklung im disruptiven Umfeld, Stuttgart, Deutschland, 28-29 Juni 2017. Hrsg.: H. Binz, Fraunhofer Verlag
Akustische Simulation von Fahrzeuggeräuschen innerhalb virtueller Umgebungen basierend auf künstlichen neuronalen Netzen (KNN)
Siegel, A.; Weber, C.; Albers, A.; Landes, D.; Behrendt, M.
2017. WInTeSys : Wissenschafts- und Industrieforum Intelligente Technische Systeme, Paderborn, Deutschland, 11-12 Mai 2017
Das Methoden Spiel SPALTEN Expedition : Akzeptanzsteigerung durch Erfahrungen und Erfolgserlebnisse
Reiß, N.; Albers, A.; Janke, M.; Popp, F.; Bursac, N.
2017. 4. Stuttgarter Symposium für Produktentwicklung 2017 (SSP) : Produktentwicklung im disruptiven Umfeld, Stuttgart, Deutschland, 28-29 Juni 2017, Fraunhofer Verlag
On the integration of product and process models in engineering design
Eckert, C.; Wynn, D.; Maier, J.; Albers, A.; Bursac, N.; Chen, H.; Clarkson, P. J.; Gericke, K.; Gladysz, B.; Shapiro, D.
2017. Design science, 3 (3), 41. doi:10.1017/dsj.2017.2
Methode zur Ermittlung der zulässigen thermomechanischen Beanspruchbarkeit trockenlaufender Friktionspaarungen
Albers, A.; Ott, S.; Basiewicz, M.; Schepanski, N.; Klotz, T.
2017. 2. VDI-Fachkonferenz Schwingungsreduzierung in mobilen Systemen 2017 : Kupplungen und Kupplungssysteme in Antrieben, Ettlingen, Germany, 17-18 May 2017, VDI Verlag
Bestimmung unbekannter Simulationsparameter durch eine mehrstufige Monte-Carlo-Simulation unter Einbeziehung gemessener Daten eines Referenzmanövers
Albers, A.; Veith, J.-M.; Behrendt, M.; Romer, A.
2017. Tagungsband : Workshop 2017 der ASIM/GI Fachgruppen STS und GMMS, Ulm, Deutschland, 9-10 März 2017. Hrsg.: W. Commerell, 177–182, ARGESIM Verlag
Prediction of the product quality of turned parts by real-time acoustic emission indicators
Albers, A.; Stürmlinger, T.; Wantzen, K.; Gladysz, B.; Münke, F.
2017. Procedia CIRP, 63, 348–353. doi:10.1016/j.procir.2017.03.173
Coupling of Computer-aided Methods : Supporting Product Developer during Embodiment Synthesis
Albers, A.; Spadinger, M.; Serf, M.; Reichert, S.; Heldmaier, S.; Schulz, M.
2017. WCSMO 12 : Proceedings of the 12th World Congress on Structural and Multidisciplinary Optimisation, Braunschweig, Germany, 5-9 Juni 2017
Methode zur Kalibrierung des Kupplungssystems und Objektivierung des Wiederstartkomforts hybrider Antriebsstränge auf dem Akustikrollenprüfstand
Albers, A.; Schille, F.; Wysocki, T.; Behrendt, M.; Birkhold, J.-M.; Cortès, S.
2017. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2017 : 2. VDI-Fachkonferenz Schwingungsreduzierung in mobilen Systemen 2017. Hrsg.: VDI Wissensforum GmbH, 399 – 416, VDI Verlag. doi:10.51202/9783181023099-399
Entwicklung einer verlustoptimierten Kupplung für ein mehrgängiges Getriebe für ein Elektrofahrzeug
Albers, A.; Reichert, U.; Bause, K.; Radimersky, A.; Ott, S.
2017. 2. VDI-Fachkonferenz Schwingungsreduzierung in mobilen Systemen 2017 : Kupplungen und Kupplungssysteme in Antrieben, Ettlingen, Germany, 17-18 May 2017, VDI Verlag
Variation von Nutbildern mittels generativer Verfahren zur Untersuchung von Schleppverlusten in Lamellenkupplungen
Albers, A.; Ott, S.; Basiewicz, M.; Denda, C.; Kriegseis, J.
2017. 2. VDI-Fachkonferenz Schwingungsreduzierung in mobilen Systemen 2017 : Kupplungen und Kupplungssysteme in Antrieben, Ettlingen, Germany, 17-18 May 2017, VDI Verlag
Neue Ansätze zur quantitativen Charakterisierung von Zweimassenschwungrädern auf hochdynamischen Komponentenprüfständen
Albers, A.; Berger, J.; Boog, S.
2017. 2. VDI-Fachkonferenz Schwingungsreduzierung in mobilen Systemen 2017 : Kupplungen und Kupplungssysteme in Antrieben, Ettlingen, Germany, 17-18 May 2017, 135–145, VDI Verlag
Agile product engineering through continuous validation in PGE - Product Generation Engineering
Albers, A.; Behrendt, M.; Klingler, S.; Reiss, N.; Bursac, N.
2017. Design science, 3 (5), 19. doi:10.1017/dsj.2017.5
The development of electric drive systems : How to deal with the challenges
Albers, A.; Bause, K.; Reichert, U.; Ott, S.
2017. EVS30 : The 30th International Electric Vehicle Symposium & Exhibition, Stuttgart, Germany, 9-11 October 2017
Die Frühe Phase der PGE - Produktgenerationsentwicklung
Albers, A.; Rapp, S.; Birk, C.; Bursac, N.
2017. 4. Stuttgarter Symposium für Produktentwicklung 2017 (SSP) : Produktentwicklung im disruptiven Umfeld, Stuttgart, Deutschland, 28-29 Juni 2017, Fraunhofer Verlag
Studie zur Ermittlung von Potenzialen zur Leistungssteigerung von trockenlaufenden Kupplungssystemen mittels Temperaturverteilungsmessung
Albers, A.; Ott, S.; Kniel, J.; Basiewicz, M.
2017. 2. VDI-Fachkonferenz Schwingungsreduzierung in mobilen Systemen 2017 : Kupplungen und Kupplungssysteme in Antrieben, Ettlingen, Germany, 17-18 May 2017, VDI Verlag
Torsional vibration excitation using axial shaker to determine dynamic properties of elastomeric flexible couplings
Albers, A.; Matitschka, J.; Ott, S.
2017. Proceedings of the 2nd Torsional Vibration Symposium 2017, Salzburg, Austria, 17-19 May 2017
Model Based Requirements Engineering for the Development of Modular Kits
Scherer, H.; Albers, A.; Bursac, N.
2017. Procedia CIRP, 60, 145–150. doi:10.1016/j.procir.2017.01.032
Efficient Use of Sounding Board Method at Project Milestones and its Potentials for Virtualization
Walter, B.; Albers, A.; Schelleis, A.; Kurrle, A.
2017. Procedia CIRP, 60, 284–289. doi:10.1016/j.procir.2017.02.004
Effects of driving functions reorganization on subsystems in electric drive systems
Albers, A.; Bause, K.; Reichert, U.; Ott, S.
2017. 17. Internationales Stuttgarter Symposium : Automobil- und Motorentechnik. Hrsg.: M. Bargende, 607–621, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-658-16988-6_50
PGE – Produktgenerationsentwicklung am Beispiel des Zweimassenschwungrads
Albers, A.; Bursac, N.; Rapp, S.
2017. Forschung im Ingenieurwesen, 81 (1), 13–31. doi:10.1007/s10010-016-0210-0
2016
Normung und Standardisierung in der akademischen Lehre - NuSaL - Forschung und Lehre - BMBF-Forschungsvorhaben
Albers, A.; Butenko, V.; Drechsler, S.; Walter, B.
2016. DIN-Mitteilungen + Elektronorm : Zeitschrift für deutsche, europäische und internationale Normung / Deutsches Institut für Normung (DIN), (01), 120
Einsatz von generativen Fertigungsverfahren zur Variation von Nutbildgeometrien in nasslaufenden Lamellenkupplungen zur Untersuchung von Schleppverlusten
Albers, A.; Denda, C.; Basiewicz, M.; Kriegseis, J.
2016. GfT Tribologie – Fachtagung 2016, 26. – 28. September 2016, Göttingen, Deutschland
Effiziente Validierung des Fahrzeuginnegeräuschs von Elektrofahrzeugen am Beispiel des Phänomens Torsionsheulen
Behrendt, M.; Albers, A.; Fischer, J.; Lieske, D.
2016. 8. E-MOTIVE - Expertenforum für elektrische Antriebe, Schweinfurt, 07.-09. September 2016
Neuartige Validierungsmethoden für hochdynamisch belastete Doppelkupplungssysteme
Albers, A.; Boog, S.; Berger, J.; Basiewicz, M.; Ott, S.
2016. Test Facility Forum Frankenthal 27.-28.09.2016
Development of construction catalog for appropriate design of fiber reinforced polymers
Butenko, V.; Spadinger, M.; Albers, A.
2016. Proceedings of the IEOM Detroit Conference : Industrial Engineering and Operations Management, Detroit, Michigan, USA, 23rd - 25th September 2016, 387–388, IEOM Society International
ProVIL - Produktentwicklung im virtuellen Ideenlabor: Anpassung einer kollaborativen Innovationsplattform zur Nutzung eines communityorientierten Innovationsprozesses
Walter, B.; Albers, A.; Heck, M.; Bursac, N.
2016. Vorausschau und Technologieplanung : 12. Symposium für Vorausschau und Technologieplanung, 8. und 9. Dezember 2016, Berlin., 197–209, Heinz-Nixdorf-Institut
Produktentwicklung im virtuellen Ideenlabor - Konzipierung und Implementierung eines Live-Lab
Walter, B.; Albers, A.; Haupt, F.; Bursac, N.
2016. Design for X : Beiträge zum 27. DfX-Symposium Oktober 2016. Hrsg.: Kraus, D.; Dieter Krause, Kristin Paetzold; Kraus, D.; Dieter Krause, Kristin Paetzold, 283–295, TuTech Innovation Verlag
Towards Cognitive Computer Aided Engineering
Suwelack, S.; Stoll, M.; Meyer, A.; Slavetinsky, S.; Serf, M.; Bursac, N.; Albers, A.; Dillmann, R.; Speidel, S.
2016. Proceedings of NAFEMS Americas Conference 2016, Seattle, NAFEMS
Iterative Kopplung von Fließsimulation und Topologieoptimierung für langfaserverstärkte Polymere
Spadinger, M.; Albers, A.
2016. Berechnung und Simulation: Anwendungen - Entwicklungen - Trends : 3. NAFEMS DACH Regionalkonferenz: unabhängig - übergreifend - neutral : 25.-27. April 2016, Bamberg, Deutschland : Tagungsband, NAFEMS GmbH
Identification of optimal plug-in hybrid powertrain configurations
Reuschl, T.; Albers, A.; Ruoff, S.
2016. 15. Internationales CTI Symposium, Berlin, 6.-7.12.2016
Der Methodencoach InnoFox
Reiß, N.; Bursac, N.; Albers, A.
2016. WiGeP News, (2), 2–3
Koppelgetriebe als Schaltroboter mit Kinematik-, Regelungs- und Anwendermodellen
Pinner, T.; Ott, S.; Albers, A.
2016. 18. VDI-Getriebetagung Bewegungstechnik 2016, Nürtingen, 20.-21. September, 2016, 179–192
Empirical Study on Sensor and Actuator Systems of Validation Setups: Descriptive Models, Application and Analysis
Pinner, T.; Klingler, S.; Albers, A.
2016. 11. International Symposium on Tools and Methods of Competitive Engineering TMCE 2016, Aix-en-Provence, France, 09. - 13. May, 2016, University of Technology
Modellbasierter mechanischer Konzeptentwurf: Ergebnisse des FAS4M-Projektes
Moeser, G.; Grundel, M.; Weilkiens, T.; Kümpel, S.; Kramer, C.; Albers, A.
2016. Tag des Systems Engineering, Herzogenaurach, 25. - 27. Oktober 2016, 419–428, Carl Hanser Verlag
Model-Based Systems Engineering (MBSE) in der Karlsruher Schule: Neue Lehrkonzepte für die Aus- und Weiterbildung im Bereich MBSE
Matthiesen, S.; Albers, A.; Moeser, G.; Schmidt, S.; Bursac, N.
2016. develop^3 systems engineering, (02 2016), 38–41
Coupling flow simulation and topology optimization for fiber-reinforced plastics
Spadinger, M.; Albers, A.
2016. ECCOMAS Congress 2016, June 5-10, 2016, Crete Island, GR
PQRM – Ein Produktreifegradmodell zur entwicklungsbegleitenden Beurteilung und Steuerung der Produktqualität
Gladysz, B.; Beautier, E.; Albers, A.; Lehle, W.
2016. Konstruktion, 68 (10), 86–90
Materialeffizienz im Resin-Transfer-Moulding-Prozess - Ganzheitliche Subpreforming-Strategie erlaubt Reduktion des Faserverschnitts
Fleischer, J.; Albers, A.; Coutandin, S.; Spadinger, M.
2016. VDI-Z integrierte Produktion, 16 (1), 82–84
Priorisierung von Aktivitäten zur Konkretisierung von Produkteigenschaften am Beispiel einer Batteriemodulentwicklung
Eisele, M.; Schoch, S.; Puls, R.; Albers, A.; Radimersky, A.
2016. Design for X. Proceedings of the 27th Symposium Design for X, 5.-6. Oktober 2016, Jesteburg. Hrsg.: D. Krause, 219–230, The Design Society
Baukastenentwicklung durch MBSE am Beispiel einer modularen Fertigungsanlage im Kontext der Industrie 4.0
Bursac, N.; Albers, A.; Ölschläger, M.
2016. Tag des Systems Engineering, Herzogenaurach, 25.–27. Oktober 2016, 247–256, Carl Hanser Verlag. doi:10.3139/9783446451414.024
Fachliches Problemlösen in der Maschinenkonstruktion : Untersuchung von Struktur und Erlernbarkeit mittels multimodaler Technikmodelle
Breitschuh, J.; Sonnenschein, E.; Fuchs, J.; Albers, A.
2016. Journal of technical education, 4 (2), 212–232
Systematik zur Bewertung von Baukästen am Beispiel eines Werkzeugmaschinenherstellers
Birk, C.; Albers, A.; Muschik, S.; Bursac, N.
2016. 14. Gemeinsames Kolloquium Konstruktionstechnik 2016, Rostock, 6.-7.10.2016, 8, Universtität
System-integrated data acquisition in validation and operation of electric vehicles
Bause, K.; Munker, F.; Reiß, N.; Rupalla, A.; Behrendt, M.; Albers, A.
2016. 16. Internationales Stuttgarter Symposium. Automobil- und Motorentechnik. Hrsg.: M. Bargende, 643–657, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-658-13255-2_48
Don’t get stuck in complexity: Coping with strategic complexity in the context of Product Generation Engineering
Arslan, M.; Haug, F.; Heitger, N.; Krämer, L.; Albers, A.
2016. R&D Management Conference, 3rd - 6th July 2016, Cambridge, 14
Validierung 4.0 - Verteilte Systemvalidierung am Beidpiel der Antriebstrangentwicklung
Albers, A.; Yan, S.; Klingler, S.; Ott, S.; Behrendt, M.; Disch, C.; Heinz, A.; Jäger, B.; Düser, T.
2016. 18. Kongress SIMVEC - Simulation und Erprobung in der Fahrzeugentwicklung 2016: Berechnung, Prüfstands- und Straßenversuch, Baden-Baden, 22. - 23. November, 2016, 819–832, VDI Verlag
Validation Support for Distributed Vehicle Development Based on the XiL-Approach
Albers, A.; Yan, S.; Behrendt, M.
2016. FISITA 2016 World Automotive Congress,BEXCO, Busan, Korea, 26. - 30. September, 2016, FISITA 2016 World Automotive Congress
How To Drive Efficient Open Innovation? On the example of ProVIL
Albers, A.; Richter, T.; Bursac, N.; Walter, B.
2016
Elektrische Traktions - und Hilfsantriebe für die Elektrifizierung und Hybridisierung von Kraftfahrzeugen
Albers, A.; Reuschl, T.; Babik, A.; Schönknecht, A.
2016. Elektrische Traktions- und Hilfsantriebe für die Elektrifizierung und Hybridisierung von Kraftfahrzeugen, Schäfer, Heinz, expert-Verlag
Software supported development of a Battery Electric Vehicle powertrain considering the efficiency
Albers, A.; Reichert, U.; Ott, S.; Radimersky, A.
2016. 16th International VDI Congress Drivetrain for Vehicles 2016, Transmissions in mobile machine, Friedrichshafen, 21. - 22. June, 2016, VDI Verlag
Untersuchung des Einlauf-Verschleißverhaltens von geschmierten Kontakten unter Berücksichtigung unterschiedlicher Fertigungsverfahren mit Hilfe der Finite-Elemente-Methode
Albers, A.; Reichert, S.; Heldmaier, S.
2016. Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen : 57. Tribologie-Fachtagung (Band 1), Göttingen, Deutschland, 26-28 September 2016, Gesellschaft für Tribologie e.V. (GfT)
Determination of sustainability indicators and validation strategies for integrated electro mobility
Albers, A.; Reiß, N.; Bause, K.; Burkardt, N.; Behrendt, M.
2016. 11th International Symposium on Tools and Methods of Competitive Engineering, Aix-en-Provence, France, 9. - 13. May, 2016, 15, Proceedings of TMCE
Methode zur Ermittlung der anwendungsspezifischen Leistungsgrenze trockenlaufender Reibpaarungen
Schepanski, N.; Albers, A.; Ott, S.; Basiewicz, M.
2016. Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen : 57. Tribologie-Fachtagung, Göttingen, 26. - 28. September 2016. Bd. 1, 26, Gesellschaft für Tribologie e.V. (GfT)
Modellbasierte Prinzip- und Gestaltvariation
Albers, A.; Moeser, G.
2016. 14. Gemeinsames Kolloquium Konstruktionstechnik (KT) : Traditio et Innovatio - Entwicklung und Konstruktion, Rostock, 6. - 7. Oktober 2016. Hrsg.: K. Brökel, 96–104, Shaker Verlag
Model-Based Systems Engineering (MBSE) in der Karlsruher Schule: Fünf Jahre Forschung für die Anwendung
Albers, A.; Matthiesen, S.; Moeser, G.; Schmidt, S.; Bursac, N.
2016. Develop Systems Engineering, (2), 28–32
The Connected Car - A system-of-systems: Exploration of challenges in development from experts view
Albers, A.; Kurrle, A.; Klingler, S.
2016. 16. Internationales Stuttgarter Symposium Automobil- und Motorentechnik, Stuttgart, 15.- 16. März 2016. Hrsg.: M. Bargende, 1439–1450, Springer Verlag
Produktgenerationsentwicklung Praxisbedarf und Fallbeispiel in der automobilen Produktentwicklung
Albers, A.; Haug, F.; Heitger, N.; Arslan, M.; Rapp, S.; Bursac, N.
2016. 12. Symposium für Vorausschau und Technologieplanung (SVT), Berlin, 8. - 9. Dezember 2016, Heinz-Nixdorf-Institut
Integration von Versuchsergebnissen in C&C² - Modellen zur Wiederverwendung in der Produktgenerationsentwicklung am Beispiel eines trockenlaufenden Kupplungssystems
Albers, A.; Gladysz, B.; Kniel, J.; Aschoff, M.; Meyer, A.
2016. KT 2016 : 14. Gemeinsames Kolloquium Konstruktionstechnik : Traditio et Innovatio - Entwicklung und Konstruktion, Rostock, 6. - 7. Oktober 2016. Hrsg.: K. Brökel, 10–20, Shaker Verlag
ProVIL - Produktentwicklung im virtuellen Ideenlabor
Albers, A.; Bursac, N.; Walter, B.; Hahn, C.; Schröder, J.
2016. Entwerfen, Entwickeln, Erleben : Werkzeuge und Methoden in Produktionsentwicklung und Design - Dresden, 30. Juni - 1. Juli 2016. Hrsg.: R. Stelzer, 185–198, TUDpress
In den Kunden hineinversetzen - Wie in Entwicklungsprojekten die Kundenorientierung gesteigert werden kann
Albers, A.; Bursac, N.; Schmidt, S.; Reiß, N.
2016. Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, (1), 20–21
Product Generation Engineering - A New Concept for Successful Product Development
Albers, A.
2016. International Symposium Engineering Design - The Art of Building Networks - Innovation by integrating science, disciplines and cultures - 50 years Institute of Product Development at the Technical University of Munich, Munich, 04.04.2016
Method Support in Product Generation Engineering
Albers, A.; Bursac, N.; Rapp, S.
2016. MMEP workshop - Application and adaptation of design methods in industry, Karlsruhe, Germany, 21 - 22 September 2016, Karlsruher Institut für Technologie (KIT)
A New Tribological Test Bench for Lightweight Hydraulic Axial Piston Pumps
Albers, A.; Blust, M.; Wantzen, K.; Lorentz, B.
2016. Proceedings of the 20th International Colloquium Tribology : Industrial and Automotive Lubrication, Stuttgart / Ostfildern, Germany, 12th - 14th January 2016. Ed.: A. Fatemi, Technische Akademie Esslingen (TAE)
Acoustic Source Localization on Vehicles on a Roller Test Bench for a Virtual Traffic Simulation
Albers, A.; Behrendt, M.; Landes, D.; Weber, C.; Husung, S.; Siegel, A.
2016. 27th International Conference on Noise and Vibration Engineering, ISMA 2016 and International Conference on Uncertainty in Structural Dynamics, USD2016, Leuven, Belgium, 19. - 21. September, 2016, KU Leuven
Verifikation und Validierung im Produktentstehungsprozess
Albers, A.; Behrendt, M.; Klingler, S.; Matros, K.
2016. Handbuch Produktentwicklung. Hrsg.: Udo Lindemann, 541–569, Carl Hanser Verlag
Efficient and Effective Validation in Product Generation Engineering
Albers, A.; Behrendt, M.; Klingler, S.; Bursac, N.
2016. 9th Graz Symposium Virtual Vehicle, Graz, 23. - 25. Mai 2016
Tribosystemic view of CVT in drive systems - Getting tribological mechanisms in CVT under control
Albers, A.; Bause, K.; Ott, S.; Reichert, S.; Behrendt, M.; Reichert, U.
2016. Drivetrain for vehicles 2016 / 16th International VDI Congress Drivetrain for Vehicles 2016 : Friedrichshafen, June 21 and 22, 2016 / VDI-Society Product and Process Design, 905–918, VDI Verlag
Zitationsindizes in Berufungsverfahren
Albers, A.
2016. WiGeP News, (2), 11–12
A new approach for higher first gear ratios by increasing the clutch performance using fiber sensing technology
Albers, A.; Kniel, J.; Ott, S.; Lorentz, B.; Eisele, M.
2016. 16th International VDI Congress Drivetrain for Vehicles (Getriebe in Fahrzeugen) : Friedrichshafen, Germany, June 21 - 22, 2016, 469–484, VDI Verlag
Methode zur Bestimmung der Leistungsgrenzen trockenlaufender Friktionssysteme mit organischen, sintermetallischen, keramischen oder kombinierten Friktionswerkstoffen
Albers, A.; Ott, S.; Schepanski, N.
2016. Geschäftsbericht 2016 - vorgelegt anlässlich der Mitgliederversammlung am 29. November 2016 in Würzburg, Berichtszeitraum 3.12.2015 bis 29.11.2016, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Auszeichnung für Produktentwickler des KIT
Albers, A.; Heldmaier, S.; Bursac, N.
2016. Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, (2/2016), 3
Method recommendation and application in agile product development processes
Reiß, N.; Bursac, N.; Albers, A.; Walter, B.; Gladysz, B.
2016. 14th International Design Conference, DESIGN 2016, Cavtat, Dubrovnik, Croatia, 16 - 19 May, 2016, 401–410, The Design Society
Koppelsystems: Obligatory elements within validation setups
Albers, A.; Pinner, T.; Yan, S.; Hettel, R.; Behrendt, M.
2016. 14th International Design Conference, DESIGN 2016, Cavtat, Dubrovnik, Croatia, 16 - 19 May, 2016, 791–800, The Design Society
PGE - Product generation engineering : Case study of the dual mass flywheel
Albers, A.; Bursac, N.; Rapp, S.
2016. DS 84: Proceedings of the DESIGN 2016 14th International Design Conference : Engineering Design Practice, Cavtat-Dubrovnik, Croatia, 16th - 19th May 2016. Ed.: D. Marjanović, 791–800, The Design Society
The application of creativity methods in virtual teams in product development
Walter, B.; Rapp, S.; Albers, A.
2016. 14th International Design Conference, DESIGN 2016, Cavtat, Dubrovnik, Croatia, 16 - 19 May, 2016, 749–758, The Design Society
Modellbildung von Koppelsystemen in der dynamischen Validierung von Antriebssystemkomponenten
Albers, A.; Boog, S.; Berger, J.; Matitschka, J.; Basiewicz, M.
2016. 18. Kongress SIMVEC Simulation und Erprobung in der Fahrzeugentwicklung 2016, Baden-Baden, 22. - 23. November, 2016, VDI Verlag
Neuartige Validierungsmethoden für hochdynamisch belastete Doppelkupplungssysteme
Albers, A.; Boog, S.; Berger, J.; Basiewicz, M.; Ott, S.
2016. Test Facility Forum Frankenthal 27.-28.09.2016, SBI (Schreiber, Brand und Partner Ingenieurgesellschaft, Frankenthal)
Method for Measuring and Analyzing Transient Powertrain Vibrations of Hybrid Electric Vehicles on an Acoustic Roller Test Bench
Albers, A.; Schille, F.; Behrendt, M.
2016. 9th International Styrian Noise, Vibration and Harshness Congress: The European Automotive Noise Conference, ISNVH 2016, Grazer Congress Sparkassenplatz 1 Graz, Austria, 22 - 24 June, 2016. doi:10.4271/2016-01-1835
Tribologische Untersuchung und Bewertung von faserverstärkten Polymeren für die Leichtbauhydraulik
Abraham, T.; Weber, M.; Bräuer, G.; Leisner, M.; Blust, M.; Lorentz, B.; Albers, A.
2016. Tribologie und Schmierungstechnik, 63 (6)
Virtual Acoustic Model for the Simulation of Passing Vehicle Noise
Siegel, A.; Weber, C.; Mahboob, A.; Albers, A.; Landes, D.; Behrendt, M.
2016. ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Charlotte, North Carolina, USA, 21 August 2016, V01BT02A055, The American Society of Mechanical Engineers (ASME). doi:10.1115/DETC2016-59872
Got the power? - A new method for a quick determination of the sound power using free-form measuring surfaces
Albers, A.; Behrendt, M.; Landes, D.; Hettel, R.; Fischer, J.
2016. 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, INTER-NOISE 2016; Hamburg; Germany; 21 August 2016 through 24 August 2016. Ed. : W. Kropp, 5955–5961, German Acoustical Society
Selecting appropriate tools for synchronous communication and collaboration in locally distributed product development
Walter, B.; Rapp, S.; Albers, A.
2016. 12th Biennial Norddesign 2016 Conference "Highlighting the Nordic Approach", NordDesign 2016; Norwegian University of Science and Technology (NTNU)Trondheim; Norway; 10 August 2016 through 12 August 2016. Volume 2. Ed. : M. Steinert, 258–267, The Design Society
15 years of SPALTEN problem solving methodology in product development
Albers, A.; Reiß, N.; Bursac, N.; Breitschuh, J.
2016. 12th Biennial Norddesign 2016 Conference "Highlighting the Nordic Approach", NordDesign 2016; Norwegian University of Science and Technology (NTNU)Trondheim; Norway; 10 August 2016 through 12 August 2016. Volume 1. Ed. : M. Steinert, 411–420, The Design Society
Determination of the bead geometry considering formability and stiffness effect using generalized forming limit concept (GFLC)
Cha, W.-G.; Vogel, S.; Bursac, N.; Albers, A.; Volk, W.
2016. Journal of physics / Conference Series, 734 (3), Art.Nr.: 032077. doi:10.1088/1742-6596/734/3/032077
IPeM-Integrated Product Engineering Model in Context of Product Generation Engineering
Albers, A.; Reiss, N.; Bursac, N.; Richter, T.
2016. Procedia CIRP, 50, 100–105. doi:10.1016/j.procir.2016.04.168
Wear simulation in non-lubricated and mixed lubricated contacts taking into account the microscale roughness
Reichert, S.; Lorentz, B.; Heldmaier, S.; Albers, A.
2016. Tribology international, 100, 272–279. doi:10.1016/j.triboint.2016.02.009
2015
A Method for Robust Rib Optimization of Long-Fiber-Reinforced Composite Parts with Varying Material Properties
Troll, D.; Speck, I.; Horsch, J.; Weber, P.; Albers, A.
2015. NAFEMS Seminar: Optimization and Robust Design, 23 - 24 March 2015, Wiesbaden, Deutschland, 2015, 103–110, NAFEMS
Iterative Coupling of Flow Simulation and Topology Optimization for long-fiber-reinforced Plastics
Spadinger, M.; Albers, A.
2015. 28. Workshop Composite Forschung in der Mechanik / Simulation im Leichtbau, Paderborn, 09. - 10. Dezember 2015
Considering User’s Impact in Validation Activities - An Approach for the Determination of Requirements
Pinner, T.; Jost, F.; Schmid, D.; Albers, A.
2015. Design for life : the 20th International Conference on Engineering Design (ICED 15) ; 27th - 30th July 2015, Politecnico di Milano, Italy. Bd.: Pt. 1, 5–51, The Design Society
SystemSketcher - Entstehung eines anwenderorientierten Ansatzes zur interdisziplinären Systemmodellierung
Munker, F.; Albers, A.
2015. Tag des Systems Engineering, Ulm, 11. - 13. November, 2015, 10, Carl Hanser Verlag
Fortschrittsbericht zur modellbasierten Unterstützung der Konstrukteurstätigkeit durch FAS4M
Moeser, G.; Kramer, C.; Grundel, M.; Neubert, M.; Kümpel, S.; Scheithauer, A.; Kleiner, S.; Albers, A.
2015. Tag des Systems Engineering, Ulm, 11. - 13. November, 2015, 69–78, Carl Hanser Verlag
Modellbasierte Funktions-Gestalt-Synthese: Unterstützung der Entwickler bei der Definition der Produktgestalt
Moeser, G.; Albers, A.; Klingler, S.
2015. Design for X: Beiträge zum 26. DfX Symposium, Oktober 2015, Tutech Verlag
Usage of Free Sketches in MBSE - Raising the applicability of Model-Based Systems Engineering for Mechanical Engineers
Moeser, G.; Albers, A.; Kümpel, S.
2015. First IEEE International Symposium on Systems Engineering, Rome Marriott Park Hotel, Rome, Italy, 28. - 30. September, 2015, 50–55, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SysEng.2015.7302511
Supporting validation activities and self-reflection processes in interdisciplinary design teams
Matthiesen, S.; Schmidt, S.; Klingler, S.; Pinner, T.; Eisenmann, M.; Ludwig, J.; Hohmann, S.; Albers, A.
2015. 17th International Conference on Engineering and Product Design Education, Loughborough Design School, University of Loughborough, United Kingdom, 3. - 4. September, 2015, 418–423, The Design Society
Das Geheimnis lüften - Messung von Temperaturprofilen in einer Reibkupplung
Kniel, J.; Albers, A.; Ott, S.; Lorentz, B.
2015. Die Antriebstechnik, (10/2015), 68–69
Audio-visuelle Simulation der Fahrzeugvorbeifahrt unter Nutzung von VR und Prüfstandsmessungen
Husung, S.; Siegel, A.; Weber, C.; Müller, B.; Behrendt, M.; Landes, D.; Albers, A.
2015. Wissenschafts- und Industrieforum Intelligente Technische Systeme 2015, 23. – 24. April 2015, Paderborn. Wirtschaft und Wissenschaft auf dem Weg zu Industrie 4.0, Heinz Nixdorf Institut
Zum Einfluss der Morphologie auf das tribologische Verhalten von Kunststoffen
Frick, A.; Borm, M.; Spadaro, M.; Muralidharan, V.; Blust, M.; Albers, A.
2015. Proceedings. 56. GfT-Tribologie-Fachtagung 2015. Tribologie-Fachtagung 2015 mit internationaler Beteiligung Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen, 21. bis 23. September 2015 in Göttingen, Gesellschaft für Tribologie e.V. (GfT)
Integrated Product and Process Models: Towards an Integrated Framework and Review
Eckert, C.; Albers, A.; Bursac, N.; Chen, H.; Clarkson, J.; Gericke, K.; Gladysz, B.; Maier, J.; Rachenkova, G.; Shapiro, D.; Wynn, D.
2015. 20th International Conference on Engineering Design, ICED 2015, Milano, I, July 27-30, 2015. Ed.: C. Weber, 389–398, The Design Society
The influence of standards on product development and quality management in mechanical and electrical engineering - results of an inquiry
Drechsler, S.; Albers, A.
2015. 20th EURAS Annual Standardisation Conference - The Role of Standards in Transatlantic Trade and Regulation - 22 – 24 June 2015, Copenhagen, Denmark
Die Lehre der Standardisierung in China
Drechsler, S.; Albers, A.; Hao, B.; Shi, Y.
2015. DIN-Mitteilungen + Elektronorm : Zeitschrift für deutsche, europäische und internationale Normung, 07 (Juli 2015), 133–137
Eine Studie zur Relevanz von Weiterbildungen im Bereich der Normen aus Sicht der Industrie
Butenko, V.; Drechsler, S.; Walter, B.; Albers, A.
2015. DIN Mitteilungen, (Juli), 129–133
Wie viel (Grundlagen)Wissen braucht technische Bildung? Wege zu technischer Bildung
Breitschuh, J.; Mattes, P.; Albers, A.
2015. TechColleges - Mit Robotik Lehren lernen, Wege zu technischer Bildung, Referate der 9. Ingenieurpädagogischen Regionaltagung 2014, Siegen, 6. - 8. November 2014. Hrsg.: G. Kammasch, 64–71, IPW
Implementation of sound intensity measurements into indoor pass-by noise testing
Behrendt, M.; Landes, D.; Albers, A.
2015. INTER-NOISE 2015. The 44th International Congress and Exposition on Noise Control Engineering, San Francisco, CA, 9 -12 August 2015., INCE
Innovatives Kupplungsscheibendesign mit hoher Leistungsdichte für PKW-Anwendungen
Basiewicz, M.; Albers, A.; Ott, S.
2015. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2015, Karlsruhe, 28. und 29. April 2015, 15–28, VDI Verlag
Analyse wirksamer tribologischer Phänomene durch innovative Mess- und Versuchsmethoden
Aschoff, M.; Kniel, J.; Schepanski, N.; Albers, A.; Ott, S.
2015. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2015: mit Fachausstellung, Karlsruhe, 28. und 29. April 2015, 12, VDI Verlag
Phänomen Erholung im Trockenlauf
Albers, A.; Ott, S.; Schepanski, N.
2015. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2015 : mit Fachausstellung ; Karlsruhe, 28. und 29. April 2015, 301–305, VDI Verlag
Ein Beitrag zum automatischen Packaging von Energiespeichern in einer frühen Phase des Produktentstehungsprozesses
Albers, A.; Spadinger, M.; Wagner, D.
2015. Stuttgarter Symposium für Produktentwicklung 2015, Stuttgart, 19. Juni, 2015, Fraunhofer Verlag
Ergebnisbericht des BMBF Verbundprojektes IN²
Albers, A.; Seiter, M.; Reiß, N.; Bursac, N.; Gladysz, B.; Walter, B.; Aschenbrücker, A.; Berger, R.; Hollerith, T.; Löffler, M.; Lüdcke, R.; Müller, O.; Michl, C.; Prössl, J.; Siebe, A.; Urbanec, J.; Will, J.
2015. epubli
Auswirkung der Validierungsumgebung und Manöverumsetzung auf Komfortbewertungen hybridspezifischer Triebstrangphänomene
Albers, A.; Schille, F.; Hettel, R.; Behrendt, M.
2015. VPC - Simulation und Test, Methoden der Antriebsentwicklung im Dialog, 17. MTZ-Fachtagung, Hanau bei Frankfurt, 30. September - 1. Oktober, 2015, 17, ATZlive
Manöverbasierte Komfortbeurteilung des NVH-Verhaltens beim Zu- und Abschalten des Verbrennungsmotors in Hybridfahrzeugen
Albers, A.; Schille, F.; Behrendt, M.
2015. VDI-Fachkonferenz Schwingungsreduzierung in mobilen Systemen 2015, Das Wechselspiel zwischen Kupplung, Dämpfer und Antriebssystemen, Karlsruhe, Germany, 28. - 29. April, 2015, 19, VDI Wissensforum GmbH
Maneuver-Based NVH Investigations of the Internal Combustion Engine Starting Behaviour in Hybrid Vehicles
Albers, A.; Schille, F.; Behrendt, M.
2015. 3rd international ATZ conference, ATZlive 2015, Zurich, Switzerland, 23. - 24. June, 2015, 15, ATZlive
Untersuchung des Reibungsverhaltens von geschmierten Kontakten unter Berücksichtigung verschiedener Gleitbedingungen mit Hilfe der Finiten-Elemente-Methode
Albers, A.; Reichert, S.; Lorentz, B.; Knoll, G.; Lang, J.
2015. 56. Tribologie-Fachtagung, Göttingen, 21. - 23. September, 2015, Gesellschaft für Tribologie e.V. (GfT)
Funktionale Wechselwirkungen von Batteriesystemen in elektrifizierten Fahrzeugen
Albers, A.; Radimersky, A.; Brezger, F.
2015. Stuttgarter Symposium für Produktentwicklung 2015, Stuttgart, 19. Juni, 2015, Fraunhofer Verlag
Ermittlung der Leistungsgrenze trockenlaufender Friktionspaarungen in Abhängigkeit der Belastungsparameter
Albers, A.; Ott, S.; Schepanski, N.
2015. Kupplungen und Kupplungssysteme in Antrieben 2015 : VDI-Fachtagung mit Fachausstellung, Karlsruhe, 28. und 29. April 2015, 245–255, VDI Verlag
Operation Strategies for Plug-in Hybrid Electric Vehicles to reduce fuel consumption and emissions by means of Hybrid-Powertrain-in-the-Loop-Potentials
Albers, A.; Matros, K.; Behrendt, M.; Holzer, H.; Bohne, W.; Jachnik, T.; Horst, T.
2015. FISITA 2014, 35th World Automotive Congress, Maastricht, NL, Jun 2-6, 2014. Vol.: 5, 3807–3814, Curran
Maneuver-Based Analysis of Starting-Systems and Starting-Strategies for the Internal Combustion Engine in Full Hybrid Electric Vehicles
Albers, A.; Behrendt, M.; Henschel, J.; Holzer, H.; Matros, K.; Bohne, W.
2015. SAE International journal of alternative powertrains, 4 (1), 58–66. doi:10.4271/2014-01-2901
Entwicklung einer Methode für die Auralisierung von Fahrzeugaußengeräuschen basierend auf In-Situ-Schallintensitätsmessungen dominanter Komponenten
Albers, A.; Landes, D.; Behrendt, M.; Weber, C.; Siegel, A.; Husung, S.
2015. 5. Tagung Fahrzeugakustik : Aktuelle Entwicklungen in der NVH-Berechnung, Essen, Germany, 9. - 10. Juni 2015
Modellbasiertes Anforderungsmanagement von Systems-of-Systems am Beispiel des vernetzten Fahrzeugs
Albers, A.; Kurrle, A.; Moeser, G.
2015. Tag des Systems Engineering (TdSE) : Bremen, 12. - 14. November 2014. Hrsg.: M. Maurer, 373–382, Carl Hanser Verlag
Enabling dynamic R&D for a unique Luxury Car Brand
Albers, A.; Krämer, L.; Fritzsche, A.
2015. (Fast?) connecting R&D : book of abstracts - R&D Management Conference, Pisa, Italy, 23-26 June 2015, 9, Scuola Superiore Sant’Anna
Identifikation und Analyse künftiger Kompetenzbedarfe in der Produktgenerationsentwicklung - am Beispiel der Antriebsentwicklung eines Sportwagenherstellers
Albers, A.; Krämer, L.; Arslan, M.; Bursac, N.
2015. Vorausschau und Technologieplanung - 11. Symposium für Vorausschau und Technologieplanung, Berlin, 29. und 30. Oktober 2015. Hrsg.: J. Gausemeier, 319–336, Heinz Nixdorf Institut
Roadmap-based Forecasting of Competences: a Case from Strategic Management within Automotive Product Development
Albers, A.; Kramer, L.; Arslan, M.
2015. Book of abstracts : Advancing CBSM Theory, Research, Practice and Education : 3rd International Conference on Competence-based Strategic Management (ICCBSM), Istanbul, Turkey, Friday, 28 - 29 May 2015, Istanbul Technical University
Eine Methode zur kontinuierlichen Validierung in Produktentstehungsprozessen
Albers, A.; Klingler, S.; Pinner, T.; Behrendt, M.; Vikram, A.
2015. Design for X. Beiträge zum 26. DfX-Symposium - Herrsching a. Ammersee, Oktober 2015. Hrsg.: D. Krause, 169–180, Tutech Verlag
Ein Beitrag zur Beschreibung und Kategorisierung von Validierungsaktivitäten
Albers, A.; Klingler, S.; Pinner, T.; Behrendt, M.
2015. Stuttgarter Symposium für Produktentwicklung, Stuttgart, 19. Juni 2015. Ed.: H. Binz, CD-ROM + Heft, Fraunhofer Verlag
Methods for Measuring, Analyzing and Predicting the Dynamic Torque of an Electric Drive Used in an Automotive Drivetrain
Albers, A.; Fischer, J.; Behrendt, M.; Lieske, D.
2015. SAE International journal of alternative powertrains, 4 (2), 363–369. doi:10.4271/2015-01-2363
Reduction of torque oscillations in wet running clutch systems
Albers, A.; Denda, C.; Sprigade, S.; Lorentz, B.
2015. FISITA World Automotive Congress - Maastricht, The Netherlands, 2-6 June 2014. Vol.: 5, 3954–3962, Curran
Psycho-Physical studies on the perception of vehicle vibrations in passenger vehicles
Albers, A.; Cai, R.; Spengler, R.; Behrendt, M.
2015. FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June 2014. Vol. 1, 258–265, Curran
Produktgenerationsentwicklung - Bedeutung und Herausforderungen aus einer entwicklungsmethodischen Perspektive
Albers, A.; Nikola, B.; Wintergerst, E.
2015. Stuttgarter Symposium für Produktentwicklung (SSP) : Stuttgart, 19. Juni 2015 ; Hrsg.: H. Binz, 1–10, Fraunhofer Verlag
Validierung in der Produktgenerationsentwicklung
Albers, A.; Bursac, N.; Behrendt, M.
2015. News / Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP, Berliner Kreis & WGMK : Mitteilungen der WiGeP, (2), 18
System Oriented Lightweight Design - a Holistic Approach to Innovation
Albers, A.; Burkardt, N.; Spadinger, M.
2015. The 3rd International Conference Mechanical Engineering in XXI Century, Niš, September 17 - 18, 2015 / University of Niš, Faculty of Mechanical Engineering. Ed.: D. Milc̆ić, 7–12, Faculty of Mechanical Engineering
Schlussbericht zum BMBF-geförderten Forschungsvorhaben LHYDIA - Leichtbauhydraulik im Automobil (Förderkennzeichen 13X3035G)
Albers, A.; Blust, M.; Reichert, U.; Wintergerst, E.
2015. Technische Informationsbibliothek Hannover
Integration of XiL-Techniques at the roller test bench for a maneuver based identification of NVH phenomena
Albers, A.; Behrendt, M.; Schille, F.; Lochmahr, M.
2015. FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June, 8, Curran
Schaltbare Getriebe für Elektrofahrzeuge am Beispiel urbaner Nutzungsszenarien
Albers, A.; Bause, K.; Klingler, S.; Puls, R.; Behrendt, M.
2015. Urbane Mobilität der Zukunft : Symposium des Innovationsclusters REM - Regional Eco Mobility 2030 am 17./18. Juni 2015 in Karlsruhe, 53–60, Karlsruher Institut für Technologie (KIT)
Efficient, function-integrating shifting components for EV
Albers, A.; Bause, K.; Behrendt, M.; Puls, R.
2015. 14. Internationales CTI Symposium: hofer powertrain auf der Transmission Expo, Berlin, 08.12.2015
InnoFox - Situationsspezifische Methodenempfehlung im Produktentstehungsprozess
Albers, A.; Reiß, N.; Bursac, N.; Walter, B.; Gladysz, B.
2015. Stuttgarter Symposium für Produktentwicklung (SSP) : Stuttgart, 19. Juni 2015. Hrsg.: H. Binz, CD-ROM, Fraunhofer Verlag
Innovationsstrategie und Kupplungsgenerationsentwicklung: Material-, Gestalt und Funktionsvariationen für innovative Kupplungssystemlösungen
Albers, A.; Ott, S.
2015. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2015 : mit Fachausstellung; Karlsruhe, 28. - 29. April 2015, 1–14, VDI Verlag
Guidelines for competence assessment in engineering education an implementation in project nusal
Albers, A.; Butenko, V.; Breitschuh, J.; Walter, B.; Drechsler, S.; Burkardt, N.
2015. Design for life : 20th International Conference on Engineering Design (ICED 15), Politecnico di Milano, Italy, 27th - 30th July 2015. Ed.: C. Weber, 51–62, The Design Society
Maschinenbau im Studium (be)greifen - Technik erleben in der Modellbibliothek am IPEK
Albers, A.; Munker, F.
2015. Mitteilungen der WiGeP, (1/2015), 23
Connected Creativity-A Human Centered Community Platform for Innovation Impulses
Albers, A.; Maul, L.; Bursac, N.; Heismann, R.; others
2015. ICDC 2015 - Proceedings of the 3rd International Conference on Design Creativity, 158–165, The Design Society
XiL-basierte Kalibrierung und Validierung von Antriebssystemen durch den Einsatz von Rollenprüfständen
Albers, A.; Hasel, M.; Behrendt, M.
2015. VDI-Fachkonferenz mit Fachausstellung.Schwingungsreduzierung in mobilen Systemen 2015. Das Wechselspiel zwischen Kupplung, Dämpfer und Antriebssystemen. 28. und 29. April 2015, Karlsruhe
Effiziente Kalibrierung und Validierung von Steuergeräteparametern in Fahrzeugen
Albers, A.; Hasel, M.; Behrendt, M.
2015. Konstruktion, 09 (2015)
Virtual Calibration of TCU Shift-Strategy Software Functions
Albers, A.; Hasel, M.; Ebert, C.; Behrendt, M.
2015. 14. CTI Symposium, Berlin, 07. – 10. Dezember 2015
Identifikation des Federschnittmoments in Dämpfersystemen während verbrennungsmotorischer Anregung am hochdynamischen Komponentenprüfstand
Albers, A.; Boog, S.; Koch, C.; Stoll, C.
2015. Schwingungen in Antrieben 2015, 9. VDI-Fachtagung Schwingungen in Antrieben 2015, Fulda, 28. - 29. Oktober, 2015, VDI Verlag
Optische und messtechnische Bestimmung der Federdynamik in Dämpfersystemen bei dynamischer Anregung
Albers, A.; Boog, S.; Koch, C.; Ott, S.; Müller, O.; Salm, H.
2015. Getriebe aktuell, (7), 6–10
Optical analysis and measurement-based determination of spring behavior in clutch disc damper systems during dynamic operation
Albers, A.; Boog, S.; Koch, C.; Müller, O.; Ott, S.
2015. Drivetrain for vehicles 2015 : Transmissions in commercial vehicles [u.a.], Friedrichshafen, June 16 - 17, 2015. [International VDI Congress Drivetrain for Vehicles 2015], 679–700, VDI Verlag
Tribologische Untersuchung und Bewertung von faserverstärkten Polymeren für die Leichtbauhydraulik
Abraham, T.; Weber, M.; Bräuer, G.; Leisner, M.; Blust, M.; Lorentz, B.; Albers, A.
2015. Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen : 56. Tribologie-Fachtagung, Göttingen, 21. - 23. September 2015. Bd.1, 12–17, Gesellschaft für Tribologie e.V. (GfT)
Abstraktionsgrade der Systemmodellierung - von der Sprache zur Anwendung
Albers, A.; Matthiesen, S.; Bursac, N.; Moeser, G.; Schmidt, S.; Lüdcke, R.
2015. TdSE 2014 - Tag des Systems Engineering, 12. - 14.11.2014, Bremen. Ed.: M. Maurer, 183–192, Carl Hanser Verlag. doi:10.13140/2.1.4350.8007
Human ride comfort prediction of drive train using modeling method based on artificial neural networks
Lerspalungsanti, S.; Albers, A.; Ott, S.; Dueser, T.
2015. International journal of automotive technology, 16 (1), 153–166. doi:10.1007/s12239-015-0017-2
Die Veränderung organisationaler Kompetenzen im Rahmen der Produktgenerationsentwicklung von Fahrzeugen
Albers, A.; Krämer, L.; Heitger, N.; Schlennstedt, K.; Bursac, N.
2015. Design for X : Beiträge zum 26. DfX Symposium Oktober 2015. Hrsg.: D. Krause, 109–120, Tutech Verlag
Product Generation Development - The Path to Agile and Efficient Processes in Product Development
Albers, A.; Bursac, N.; Reiß, N.; Rechenkova, G.
2015. Energy, Science and Technology 2015. The energy conference for scientists and researchers. Book of Abstracts, EST, Energy Science Technology, International Conference & Exhibition, 20-22 May 2015, Karlsruhe, Germany, 51, Karlsruher Institut für Technologie (KIT)
Neuer Ansatz zur Untersuchung des thermomechanischen Verhaltens trockenlaufender Reibkupplungen durch faseroptische Sensorik mit hoher räumlicher Messdichte
Albers, A.; Ott, S.; Kniel, J.; Lorentz, B.
2015. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2015 : mit Fachausstellung; Karlsruhe, 28. und 29. April 2015, 297–300, VDI Verlag
Connected Creativity - A Human Centred Community Platform for Innovation Impulses
Albers, A.; Maul, L.; Bursac, N.; Heismann, R.
2015. Proceedings of The Third International Conference on Design Creativity. July 27-30, 2015, Milan, Italy. Ed.: A. Chakrabarti, 158–165, The Design Society
Determination of acoustic contributions of car components to the far field using transfer functions
Albers, A.; Landes, D.; Behrendt, M.; Weber, C.; Siegel, A.; Husung, S.
2015. Automobil- und Motorentechnik : 17th and 18th March 2015, Stuttgart / 15. Internationales Stuttgarter Symposium. Hrsg.: M. Bargende, 1323–1334, Springer Verlag. doi:10.1007/978-3-658-08844-6_92
Potenziale zur Reduzierung von schleppmomentbedingten Verlusten durch neue Validierungs- und Entwicklungsmethoden
Albers, A.; Denda, C.; Martin, P.; Brezger, F.; Holz, H.-C.; Kriegseis, J.
2015. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2015 : mit Fachausstellung; Karlsruhe, 28. und 29. April 2015, 289–292, VDI Verlag
Methode für die Lamellenpositionsbestimmung zur Identifikation schleppmomentverursachender Effekte in der Prüfumgebung
Albers, A.; Denda, C.; Martin, P.
2015. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2015 : mit Fachausstellung; Karlsruhe, 28. und 29. April 2015, 293–296, VDI Verlag
Potenziale des Rapid-Prototypings bei der Validierung von Nutgeometrien in der Untersuchung von Schleppmomenten bei nasslaufenden Lamellenkupplungen
Albers, A.; Denda, C.; Holz, H.-C.
2015. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2015 : mit Fachausstellung; Karlsruhe, 28. und 29. April 2015, 123–136, VDI Verlag
Product Generation Development - Importance and Challenges from a Design Research Perspective
Albers, A.; Bursac, N.; Wintergerst, E.
2015. New developments in mechanics and mechanical engineering : proceedings of the International Conference on Mechanical Engineering (ME 2015), Vienna, Austria, March 15-17, 2015 : proceedings of the International Conference on Theoretical Mechanics and Applied Mechanics (TMAM 2015) Vienna, Austria, March, 15-17, 2015. Ed.: N.E Mastorakis, 16–21, s.l
Manöverbasierte Validierung von Hybridantrieben
Albers, A.; Schille, F.; Behrendt, M.; Matros, K.; Holzer, H.
2015. ATZ - Automobiltechnische Zeitschrift, 117 (2), 64–71. doi:10.1007/s35148-015-0384-z
2014
Evaluating learning outcomes of Soft Skills in Mechanical Engineering Education
Breitschuh, J.; Helmich, A.; Albers, A.; Gidion, G.
2014. 16th International Conference on Engineering and Product Design Education: Design Education and Human Technology Relations (2014), Twente, September 4–5, 2014
Ansatz zur situations- und bedarfsgerechten Methodenauswahl in der Produktentwicklung basierend auf dem Systemtripel aus Zielsystem, Handlungssystem und Objektsystem
Albers, A.; Walter, B.; Gladysz, B.; Reiß, N.; Dörr, M.; Hinkelmann, M.
2014. Tagungsband 12. Gemeinsames Kolloquium Konstruktionstechnik 2014: Methoden in der Produktentwicklung: Kopplung von Strategien und Werkzeugen im Produktentwicklungsprozess, am 16. und 17. Oktober 2014 in Bayreuth. Hrsg.: Klaus Brökel, 83–94, Universität
Kenngrößen und Belastungsgrenzen von nasslaufenden Lamellenkupplungen unter Dauerschlupfbeanspruchung
Albers, A.; Koch, C.
2014. Karlsruher Institut für Technologie (KIT)
Schaltroboter schaltet im automatisierten Prüfstandbetrieb wie ein Mensch
Bertsche, B.; Albers, A.
2014. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 109 (5), 289–290. doi:10.3139/104.014050
Modelbased systems engineering zur unterstützung der baukastenentwicklung : Ipek – karlsruher institut für technologie (kit)
Albers, A.; Bursac, N.; Scherer, H.
2014. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 109 (7-8), 485–487. doi:10.3139/104.014070
Situationsgerechte methodenunterstützung mit einer mobilen App
Bertsche, B.; Albers, A.; Reiß, N.
2014. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 109 (9), 585–586. doi:10.3139/104.014090
Supporting Globally Distributed Product Development with a New Validation Concept
Albers, A.; You, Y.; Klingler, S.; Behrendt, M.; Zhang, T.; Song, K.
2014. Procedia CIRP, 21, 461–466. doi:10.1016/j.procir.2014.03.142
Entwicklung eines Werkzeugs zur Virtualisierung der Fahrzeugvorbeifahrt
Siegel, A.; Weber, C.; Husung, S.; Albers, A.; Landes, D.; Behrendt, M.
2014. Tagungsband Digital Engineering 2014 - Fraunhofer IFF, 17. IFF-Wissenschaftstage, 24. – 26. Juni 2014. Hrsg. : M. Schenk, 179–186, Fraunhofer Verlag
Simulation of Acoustical Properties of Technical Systems Using a Network-Based Sound-Server
Siegel, A.; Husung, S.; Weber, C.; Albers, A.; Landes, D.; Behrendt, M.
2014. 58th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, 8. - 12. September, 2014, Technische Universität Illmenau (TU Ilmenau)
Multi-View Modeling in SysML: Thematic Structuring for Multiple Thematic Views
Munker, F.; Albers, A.; Wagner, D.; Behrendt, M.
2014. Procedia computer science, 28, 531–538. doi:10.1016/j.procs.2014.03.065
Adaption of the TRIZ method to the development of electric energy storage systems
Albers, A.; Wagner, D.; Kern, L.; Höfler, T.
2014. Procedia CIRP, 21, 509–514. doi:10.1016/j.procir.2014.02.060
FAS4M - No more: “Please mind the gap!” (W)
Grundel, M.; Abulawi, J.; Moeser, G.; Scheithauer, A.; Kleiner, S.; Kramer, C.; Neubert, M.; Kümpel, S.; Albers, A.
2014. Tag des Systems Engineering 2014, Bremen, 12.-14. November 2014. Hrsg.: M. Maurer, 65–74, Carl Hanser Verlag
Approaches to Promoting Personal and Social Competence in Mechanical Engineering Design Education
Gidion, G.; Loeffler, S.; Drechsler, S.; Albers, A.
2014. Epistemic and Learning Cultures at the University of the 21st Century, 05.-06.12.2013, Seminar für Didaktik und Lehrerbildung (berufliche Schulen), Kaiserallee 11, Karlsruhe, Karlsruher Institut für Technologie (KIT)
Measurement and analysis of the interior noise and the transfer path of acoustic phenomena into the driver cabin of a battery electric vehicle
Fischer, J.; Behrendt, M.; Lieske, D.; Albers, A.
2014. 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control, INTERNOISE 2014; Melbourne, AUS, November 16-19, 2014, The Australian Acoustical Society
Ontology-grounded validation methodology for innovative automobile development projects
El-Haji, M.; Freudenmann, T.; Gauterin, F.; Albers, A.
2014. International journal of information technology and management, 13 (2/3), 108–133
Competence in Higher Education and the Working Environemnt
Breitschuh, J.; Albers, A.
2014. Kompetenz im Studium und in der Arbeitswelt- Competence in Higher Education and the Working Environment. Hrsg.: F. Musekamp, 107–129, Peter Lang International Academic Publishers
A new validation concept for future automotive development
Albers, A.; You, Y.; Klingler, S.; Behrendt, M.; Zhang, T.; Song, K.
2014. FISITA 2014 World Automotive Congress, Maastricht, the Netherlands, 2. - 6. June, 2010, KIVI
Entscheidungsunterstützung bei der kunden- und anbietergerechten Konzeptentwicklung im Rahmen der Angebotsdefinition in der Anpassungs- und Variantenkonstruktion
Albers, A.; Walch, M.
2014. Tagungsband 12. Gemeinsames Kolloquium Konstruktionstechnik 2014, Methoden in der Produktentwicklung: Kopplung von Strategien und Werkzeugen im Produktentwicklungsprozess, Bayreuth,16. - 17. Oktober, 2014, Universität Bayreuth
Integration of design methods for the product generation development of electric energy storage systems
Albers, A.; Wagner, D.; Hammami, W.; Spadinger, M.; Höfler, T.
2014. 13th International Design Conference, DESIGN 2014, Dubrovnik, Croatia, 19. - 22. May, 2014, 101–110, Faculty of Mechanical Engineering and Naval Architecture
Situation-appropriate method selection in product development process - empirical study of method application
Albers, A.; Reiß, N.; Bursac, N.; Urbanec, J.; Lüdcke, R.
2014. Proceedings of NordDesign 2014 Conference, in Espoo, Finland, 27. - 29. August, 2014, 550–559, Aalto University
Darstellung und Bewertung von Hybridantrieben mit einem Hybrid-Erlebnis-Prototypen
Matros, K.; Albers, A.; Behrendt, M.; Holzer, H.; Bohne, W.; Ars, H.
2014. Tagungsdokumentation / Simulation und Test für den Antriebsstrang, VPC.plus, 16. MTZ-Fachtagung Virtual Powertrain Creation, Hanau, 30. September - 1. Oktober 2014, 1–17, ATZlive
Process Analysis and Optimization by Targeted Application of Knowledge Management - A Case Study in the Early Stages of Product Development
Albers, A.; Lüdcke, R.; Bursac, N.; Will, J.
2014. Methoden in der Produktentwicklung: Kopplung von Strategien und Werkzeugen im Produktentwicklungsprozess : 12. Gemeinsames Kolloquium Konstruktionstechnik Bayreuth, 16. - 17. Oktober 2014. Ed.: F. Rieg, 33–42, Lehrstuhl für Konstruktionslehre und CAD
Determination of the Near-Field-Acoustics of Primary Vehicle Sound Sources in Relation to Indoor Pass-by Noise Testing for the Verification of a Virtual Acoustic Vehicle Model
Albers, A.; Landes, D.; Behrendt, M.; Weber, C.; Siegel, A.; Husung, S.
2014. Shaping the Future by Engineering : 58th IWK, Ilmenau Scientific Colloquium, Ilmenau, 8 - 12 September 2014. Ed.: P. Scharff, Universität
Method for Measuring and Analyzing the Transfer Path of Acoustic Phenomena into the Driver Cabin of a Battery Electric Vehicle
Albers, A.; Fischer, J.; Landes, D.; Behrendt, M.
2014. SAE International journal of engines, 7 (3), 1585–1592. doi:10.4271/2014-01-2071
Messung und Interpretation der Wirkkette eines akustischen Phänomens im Antriebsstrang eines Elektrofahrzeugs
Albers, A.; Fischer, J.; Behrendt, M.; Lieske, D.
2014. Automobiltechnische Zeitschrift, (3), 68–75
Identification and definition of acoustic relevant limit values for electric vehicles
Albers, A.; Behrendt, M.; Lieske, D.; Fischer, J.
2014. 14. Internationales Stuttgarter Symposium. Automotive and Engine Technology (Automobil- und Motorentechnik). Ed.: M. Bargende, 1339–1354, Vieweg Verlag. doi:10.1007/978-3-658-05130-3_95
A holistic approach to the assessment of powertrain induced acoustic phenomena in battery electric vehicles
Albers, A.; Fischer, J.; Behrendt, M.
2014. National Conference on Noise Control Engineering (Noise-Con) : Fort Lauderdale, Florida, USA, 8 - 10 September 2014. Vol.: 1, 22–30, Curran
Normung und Standardisierung - Kompetenzanforderungen an zukünftige Berufseinsteiger
Albers, A.; Drechsler, S.; Walter, B.; Butenko, V.
2014. Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, (2), 12–13
Approach for determination of objective characteristic parameters to predict vehicle vibrations caused by powertrain
Albers, A.; Cai, R.; Spengler, R.; Olfens, C.; Behrendt, M.
2014. 14. Internationales Stuttgarter Symposium : Automobil- und Motorentechnik, Stuttgart, Ed.: M. Bargende, Vieweg Verlag
Eine Methode zur Anpassung von Prüfumgebungen für Wirkungsgraduntersuchungen an Hochdrehzahlgetrieben
Albers, A.; Brezger, F.; Reichert, U.
2014. Methoden in der Produktentwicklung : Kopplung von Strategien und Werkzeugen im Produktentwicklungsprozess - 12. Gemeinsames Kolloquium Konstruktionstechnik - Bayreuth, 16. - 17. Oktober 2014. Hrsg.: K. Brökel, 141–150, Universität Bayreuth
Auswahl und Entwicklung neuer Methoden für die Rotationsdynamik an Triebstrangprüfständen zur Antriebssystementwicklung nach dem XiL-Ansatz
Albers, A.; Boog, S.; Bruchmueller, T.
2014. 16. MTZ-Fachtagung VPC.plus.2014 - Simulation und Test für die Antriebsentwicklung
A New Tribological Test Bench for Lightweight Hydraulic Components
Albers, A.; Blust, M.; Lorentz, B.; Burger, W.
2014. Tribologie und Schmierungstechnik, 64 (2), 28–34
Development of Hybrid-Powertrains by Means of X-in-the-Loop-Approach
Albers, A.; Behrendt, M.; Matros, K.; Holzer, H.; Bohne, W.
2014. ATZ-Elektronik, 9 (2)
Das Forschungsnetzwerk TU9/China mit Einblicken in Entwicklungsprozesse und Ausbildung
Albers, A.; Behrendt, M.; Klingler, S.
2014. BMBF Statusseminar Elektromobilitätsforschung, 2014
Definition and implementation of a benchmarking in order to derive success factors of hybrid powertrains
Albers, A.; Behrendt, M.; Brezger, F.; Matros, K.; Steiger, B.; Holzer, H.; Bohne, W.
2014. 14. Internationales Stuttgarter Symposium Automobil- und Motorentechnik. Bd. 1. Hrsg.: Michael Bargende, 321–335, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-658-05130-3_23
Maneuver-based Vehicle Validation - Operation Strategies and NVH-Behaviour
Albers, A.; Behrendt, M.; Schille, F.
2014. Apply & Innovate 2014. Hrsg.: IPG Automotive GmbH, 1, IPG
Methode zur kundenorientierten Validierung im Entwicklungsprozess innovativer Fahrzeugsysteme
Albers, A.; Becker, J.; Behrendt, M.; Sander, O.; Schille, F.
2014. Entwerfen Entwickeln Erleben 2014 - Beiträge zur virtuellen Produktentwicklung und Konstruktionstechnik : Dresden, 26. - 27. Juni 2014 / Hrsg.: Ralph Stelzer, 407–416, Verlag der Wissenschaften GmbH
Feasibility Studies in the Product Development Process
Albers, A.; Bause, K.; Radimersky, A.; Iwanicki, M.
2014. Procedia CIRP, 21, 473–478. doi:10.1016/j.procir.2014.03.128
Einsatz von Simulationswerkzeugen im Entwicklungsprozess elektrifizierter Antriebssysteme
Albers, A.; Bause, K.; Behrendt, M.; Ott, S.
2014. Einsatz und Validierung von Simulationsmethoden für die Antriebstechnik : SIMPEP, 17./18. September 2014 in Koblenz/Lahnstein. Hrsg.: Forschungsvereinigung Antriebstechnik e.V., 103–115, FVA
The complexity of road-to-rig approaches and diskussion of influencing parameters on the example chassis dyno
Albers, A.; Hettel, R.; Schille, F.; Behrendt, M.
2014. FISITA 2014 World Automotive Congress, Maastricht, NL, June 2-6, 2014, 8
Bitte anfassen: Die neue Modellbibliothek am IPEK - Studierende gehen auf Tuchfühlung
Albers, A.; Munker, F.
2014. Der Redtenbacher, 2014 (26), 6
Abstraktionsgrade der Systemmodellierung-von der Sprache zur Anwendung
Albers, A.; Matthiesen, S.; Bursac, N.; Moeser, G.; Schmidt, S.; Lüdcke, R.
2014. Tag des Systems Engineering, Bremen, 12. - 14. November 2014 ; [TdSE], 183–192, Carl Hanser Verlag
Prioritization of Validation Activities in Product Development Processes
Albers, A.; Klingler, S.; Wagner, D.
2014. 13th International Design Conference, DESIGN 2014; Dubrovnik; Croatia; 19 May 2014 through 22 May 2014. Ed. : D. Marjanovic, 81–90, Faculty of Mechanical Engineering and Naval Architecture
Normung und Standardisierung in der akademischen Lehre - IST-Situation an Hochschulen und Bedarfe der Wirtschaft
Albers, A.; Burkardt, N.; Butenko, V.; Drechsler, S.; Walter, B.
2014. DIN-Mitteilungen, 1, 4
Studium und Berufseinstieg im Maschinenbau - Ein Überblick
Albers, A.
2014. Karlsruher Institut für Technologie (KIT)
Lehre hoch Forschung - Interdisziplinäres Projekt zum Kompetenzausbau bei Studierenden und Lehrenden der Maschinenkonstruktionslehre
Albers, A.; Breitschuh, J.; Diez, A.; Gidion, G.; Helmich, A.; Klink, K.; Matthiesen, S.; Rietschel, U.
2014. Karlsruher Institut für Technologie (KIT)
Knowledge management in product generation development - An empirical study
Albers, A.; Bursac, N.; Urbanec, J.; Lüdcke, R.; Rachenkova, G.
2014. 25th Symposium Design for X, DFX 2014, Bamberg; Germany, 1. October 2014 through 2. October 2014. Ed.: D. Krause, 13–24, TuTech-Verl
Evaluating learning outcomes of soft skills in mechanical engineering education
Breitschuh, J.; Helmich, A.; Albers, A.; Gidion, G.
2014. Proceedings of the 16th International Conference on Engineering and Product Design Education: Design Education and Human Technology Relations, E and PDE 2014, Twente Enschede, Netherlands, 4. September 2014 through 5. September 2014, 644–649
The Contact and Channel Approach (C&C2-A) - relating a system’s physical structure to its functionality
Albers, A.; Sadowski, E.
2014. An Anthology of Theories and Models of Design : Philosophy, Approaches and Empirical Explorations. Ed.: A. Chakrabarti, 151–171, Springer Verlag. doi:10.1007/978-1-4471-6338-1_8
2013
Untersuchung von Mechanismen des Kompetenzerwerbs im Maschinenbaustudium
Albers, A.; Gidion, G.; Breitschuh, J.; Helmich, A.
2013. 42. Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik (2013), Magdeburg, Germany, March 4–6, 2013
Next Generation Electric Energy Storage Systems -- Systematic Design Approaches
Wagner, D.; Albers, A.; Klingler, S.; Majic, N.; Munker, F.
2013. 6. Grazer Symposium Virtuelles Fahrzeug, "Interdisziplinäre Entwicklung von Straßen- und Schienenfahrzeugen" 14.-15. Mai 2013 – Graz, Österreich
Macroscale modeling of long-fiber-reinforced composite parts with varying material properties for robust rib optimization
Troll, D.; Marston, M. P.; Albers, A.
2013. NWC 2013, NAFEMS world congress : SPDM, International Conference Simulation Process & Data Management : 9 - 12 June, Salzburg, Austria, NAFEMS
Design for Energy Efficiency: New Structural Optimization Process for a Robot Shifter
Sander, C.; Yang, T.; Albers, A.
2013. International Conference on Innovative Technologies, IN-TECH 2013, Budapest, 10. - 12. September, 2013, 53–56, University of Rijeka
Design for Energy Efficiency: Structural Optimization Process for Mechanical Parts in Dynamic Systems
Sander, C.; Kellner, M.; Albers, A.
2013. NWC 2013, NAFEMS world congress SPDM, International Conference Simulation Process & Data Management, Salzburg, Austria, 9. - 12. June, 2013, Bernau am Chiemsee NAFEMS Deutschland
Gesamtfahrzeugvalidierung mit Schaltroboter
Pinner, T.; Berger, J.; Stier, C.; Geier, M.; Albers, A.
2013. AutomobilKONSTRUKTION, (02/2013), 40–41
Reducing Friction of Heavy Duty Hydrodynamic Pod-Drive Bearing by Means of Lubrication Control and AE Condition Monitoring
Nguyen, H. T.; Gold, S.; Weber, J.; Albers, A.
2013. Society of Tribologists & Lubrication Engineers annual meeting & exhibition 2013, Detroit, Michigan, USA, 5. - 9. May, 2013, 394–397, Red Hook
Formatives Assessment fachlicher Kompetenzen von angehenden Ingenieuren - Validierung eines Kompetenzmodells für die Technische Mechanik im Inhaltsbereich Statik
Musekamp, F.; Mehrafza, M.; Heine, J.-H.; Schreiber, B.; Saniter, A.; Spöttl, G.; Breitschuh, J.; Heene, M.; Butenko, V.; Turki, T.; Burkardt, N.; Albers, A.
2013. Lehrer auf dem Prüfstand, Sonderheft (6), 177–193
Investigation of the sealing performance of piston rings in a squeeze film damper
Jäger, S.; Bruchmueller, T.; Albers, A.
2013. Proceedings SIRM 2013. Schwingungen in rotierenden Maschinen, Berlin, 25. - 27. Februar 2013
Evaluation of a new method for costumer-orientated rating of clutch systems in conceptual hybrid vehicles
Brezger, F.; Albers, A.
2013. ASME 2013 International Mechanical Engineering Congress and Exposition. Vol. 13: Transportation systems, San Diego, CA, November 15–21, 2013, The American Society of Mechanical Engineers (ASME)
Advanced ceramics as friction material in lubricated clutch systems
Bernhardt, J.; Albers, A.; Ott, S.
2013. Tribology international, 59 (SI), 267–272. doi:10.1016/j.triboint.2012.08.002
Mentale Konstruktionsbarrieren bei der Synthese und Analyse von Mikrosystemen und Konzepte zu deren Überwindung
Albers, A.; Turki, T.; Sadowski, E.; Butenko, V.
2013. 6. Kolloquium Mikroproduktion, Braunschweig, 8. Oktober 2013. Hrsg.: R. Tutsch, 6, Shaker Verlag
Effizienzsteigerung verbrennungsmotorischer Antriebe durch innovative Ansätze zur Schwingungsberuhigung
Albers, A.; Stier, C.; Boog, S.
2013. Forschungsvereinigung Verbrennungskraftmaschinen FVV, Heft R562, 2013, Forschungsvereinigung Verbrennungskraftmaschinen e.V. (FVV)
Case Study on requirements management in multidisciplinary product development
Albers, A.; Sadowski, E.; Pinner, T.; Breitschuh, J.
2013. Proceedings of the 3rd International Conference on Modelling and Management Engineering Processes MMEP, Magdeburg, Germany, 20. - 21. November, 2013, Magdeburg University
Modelling Technique for Knowledge Management, Process Management and Method application - A Formula Student exploratory study
Albers, A.; Reiß, N.; Bursac, N.; Schwarz, L.; Lüdcke, R.
2013. Proceedings of the 3rd International Conference on Modelling and Management of Engineering Processes, Magdeburg, 2013, 151–162, Springer Verlag. doi:10.1007/978-3-662-44009-4
Herausforderungen von Kupplungssystemen in modernen Antriebssytemen
Albers, A.; Stier, C.; Geier, M.
2013. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben ; Karlsruhe : 2013.03.05-06, 1–14, VDI Verlag
Sino-German Cooperation in Research and Education
Albers, A.; Klingler, S.; Behrendt, M.
2013. Sino-German Network on Electromobility - TU9 Electromobility workshop, Karlsruhe, 12 - 13 June 2013
Anwendung eines zentral zusammengesetzten Split-Plot-Versuchsplans zur Bestimmung der Einflüsse von ausgewählten Betriebsparametern auf die trockene Dichtungsreibung von Kugelhähnen
Albers, A.; Bochterle, M.; Lorentz, B.; Gauchel, W.
2013. 54. Tribologie-Fachtagung: 30. September bis 02. Oktober 2013 in Göttingen, Reibung, Schmierung und Verschleiß, 88 Fachvorträge, begleitendes Seminar "Tribologische Prüftechnik", Minisymposium "Nanotribologie", 16, Gesellschaft für Tribologie e.V. (GfT)
Prozessmodellierung zur kontinuierlichen Fahrzeugverbesserung auf Basis des IPEK X-in-the-Loop und iPeM-Ansatzes
Albers, A.; Behrendt, M.; Schille, F.
2013. Wissenschaftliche Gesellschaft f{\"u}r Produktentwicklung, 06. - 08.03.2013 in Hamburg
Systematische Produktentwicklung - Vom Innovationsimpuls in die Produktion
Albers, A.; Behrendt, M.; Maul, L.; Reiß, N.; Schille, F.
2013. 10. Fachtagung "Digital Engineering"
Verification of test-based identified simulation models
Albers, A.; Schwarz, A.; Behrendt, M.
2013. ASME Verification and Validation Symposium, Las Vegas, Nevada, May 22-24, 2013
X-in-the-Loop-Framework mit durchgängiger Integration von Optimierungsverfahren am Beispiel der Entwicklung energieeffizienter Fahrerassistenzsysteme
Albers, A.
2013. Interdisziplinäre Entwicklung von Straßen- und Schienenfahrzeugen : Prozesse, Methoden, Tools, Best Practices = Interdisciplinary development of road and rail vehicles : Processes, Methods, Tools, Best Practices / Virtual Vehicle; 6. Grazer Symposium Virtuelles Fahrzeug (GSVF), Graz ; 14. - 15. Mai 2013, Kompetenzzentrum Das Virtuelle Fahrzeug
Zwischenbericht: Kupplungsmodell zur Beschreibung der Übertragbarkeit tribologischer Prüfergebnisse von Teilbelag auf Bauteiluntersuchungen
Albers, A.
2013. Einfluss der Fertigungsparameter von weich bearbeiteten Wellen auf die Dichtfunktion von Elastomerdichtungen : FVA Informationstagung 2011, Würzburg, 23.-24. November 2011. Hrsg.: P. Schuler (FVA-Nr. 570), Forschungsvereinigung Antriebstechnik e. V. (FVA)
Vorausschau im Kontext des Produktentstehungsprozesses mittelständischer Unternehmen -- Ein Ansatz auf Basis des integrierten Produktentstehungs-Modells (iPeM)
Albers, A.; Meyer-Schwickerath, B.; Siebe, A.
2013. Vorausschau und Technologieplanung : 9. Symposium für Vorausschau und Technologieplanung, 5. und 6. Dezember 2013, Berlin. Hrsg. : J. Gausemeier, Heinz-Nixdorf-Institut
Plagiate
Albers, A.; Kempen, B.; Braun, A.
2013. Plagiate: Wissenschaftsethik und Recht. Hrsg. : T. Dreier, 256–259, Mohr Siebeck
Systematisch zu Mobilitätslösungen - Integrierte Umweltsimulation zur Optimierung von Fahrstrategie, NVH und Effizienz
Albers, A.; Hettel, R.; Schwarz, A.; Behrendt, M.
2013. Umwelteinflüsse erfassen, simulieren, bewerten : 42. Jahrestagung der GUS 2013 ; 20. März - 22. März 2013, Stutensee, Ortsteil Blankenloch, Festhalle. Hrsg. : K.-F. Ziegahn, 11 S., Ges. für Umweltsimulation
Ohne Lenken in die Kurve - Virtuelle Kurvenfahrt auf dem 4x2 Rollenprüfstand
Albers, A.; Hettel, R.; Behrendt, M.; Düser, T.
2013. Proceedings. 5. Internationales Symposium für Entwicklungsmethodik, 22. und 23. Oktober 2013, Wiesbaden, 68–79, VKM
Ein Ansatz zur Fahrermodellierung bei Lastuntersuchungen von Fahrzeugkomponenten
Albers, A.; Heinrich, D.; Brezger, F.
2013. Fahrermodellierung in Wissenschaft und Wirtschaft : 4. Berliner Fachtagung Fahrermodellierung, 13./14. Juni 2013. Hrsg.: Th. Jürgensohn, 45–56, VDI Verlag
Validation of Vehicle Drive Systems with Real-Time Simulation on High-Dynamic Test Benches
Albers, A.; Geier, M.; Jaeger, S.; Stier, C.
2013. ASME 2013 Verification and Validation Symposium (VV), Las Vegas, Nevada, May 22-24, 2013
Method for measuring and interpreting the surface velocities induced by torsional vibration in the drivetrain of a battery electric vehicle
Albers, A.; Fischer, J.; Behrendt, M.; Schwarz, A.
2013. 42nd International Congress and Exposition on Noise Control Engineering 2013: Noise Control for Quality of Life, INTER-NOISE 2013; Innsbruck; Austria; 15 September 2013 through 18 September 2013, 498–507, Curran
Energy Efficiency as Design Objective using Utility-Based Indicators
Martin, P.; Albers, A.; Ply, J.
2013. Proceedings of the 19th International Conference on Engineering Design (ICED13) Design For Harmonies, Vol. 5: Design for X, Design to X, Seoul, Korea 19-22.08.2013, 231–240, The Design Society
Development and statistical evaluation of manufacturing-oriented bead patterns
Majic, N.; Albers, A.; Kalmbach, M.; Clausen, P. M.
2013. Advances in Engineering Software, 57, 40–47. doi:10.1016/j.advengsoft.2012.11.018
Evaluation of a New Method for Customer-Orientated Rating of Clutch Systems in Conceptual Hybrid Vehicles
Brezger, F.; Albers, A.
2013. ASME 2013 International Mechanical Engineering Congress and Exposition Volume 13: Transportation Systems San Diego, California, USA, November 15-21, 2013, The American Society of Mechanical Engineers (ASME). doi:10.1115/IMECE2013-63401
Activity-Based Modeling and Analysis of Product Engineering Processes
Braun, A.; Ebel, B.; Albers, A.
2013. Smart Product Engineering : Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013, 181–190, Springer Verlag. doi:10.1007/978-3-642-30817-8_18
Method for scaling the indoor Pass-by noise testing on a roller test bench in a small anechoic chamber
Behrendt, M.; Robens, G.; Albers, A.
2013. Journal of Basic and Applied Physics, 2 (5), 29–35
Target weighing - A new approach for conceptual lightweight design in early phases of complex systems development
Albers, A.; Wagner, D.; Ruckpaul, A.; Hessenauer, B.; Burkardt, N.; Matthiesen, S.
2013. Proceedings of the 19th International Conference on Engineering Design (ICED13) Design For Harmonies, Vol. 5: Design for X, Design to X, Seoul, Korea 19-22.08.2013, 301–310, The Design Society
X-in-the-loop Validierungsmethoden für Kupplungssysteme
Albers, A.; Stier, C.; Geier, M.
2013. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2013 : mit Fachausstellung ; Karlsruhe, 05. und 06. März 2013 / VDI, Produkt- und Prozessgestaltung, 249–254, VDI Verlag
Herausforderungen von Kupplungssystemen in modernen Antriebssystemen
Albers, A.; Stier, C.; Geier, M.
2013. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2013 : mit Fachausstellung ; Karlsruhe, 05. und 06. März 2013 / VDI, Produkt- und Prozessgestaltung, 1–14, VDI Verlag
Validierung von Fahrzeug-Antriebssystemen mit hochdynamischen Prüfständen
Albers, A.; Stier, C.; Babik, A.; Geier, M.
2013. Systemanalyse in der Kfz-Antriebstechnik VII : dynamisches Gesamtsystemverhalten von Fahrzeugantrieben ; [9 Fachtagung Dynamisches Gesamtsystemverhalten von Fahrzeugantrieben am 19. März 2013 im Hotel Vierjahreszeiten in Starnberg]. Hrsg.: U. Brill, 132–137, expert-Verlag
Vorausschau im Kontext des Produktentstehungsprozesses mittelständischer Unternehmen - Ein Ansatz auf Basis des integrierten Produktentstehungsmodells (iPeM)
Albers, A.; Meyer-Schwickerath, B.; Siebe, A.
2013. 9. Symposium für Vorausschau und Technologieplanung, Band 318, 5. und 6. Dezember 2013, Berlin. Hrsg.: J. Gausemeier, Universität Paderborn
Internal Innovation Communities from a User’s Perspective: How to Foster Motivation for Participation
Albers, A.; Maul, L.; Bursac, N.
2013. Smart Product Engineering : Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013. Ed.: M. Abramovici, 525–534, Springer Verlag. doi:10.1007/978-3-642-30817-8_51
Modeling systems of objectives in engineering design practice
Albers, A.; Klingler, S.; Ebel, B.
2013. Proceedings of the 19th International Conference on Engineering Design (ICED13), Design for Harmonies, Vol.1: Design Processes, Seoul, Korea, 19-22.08.2013, 379–388, The Design Society
Optimierte Randbedingungen für die Untersuchung antriebsstranginduzierter Fahrzeugschwingungen auf Fahrzeug-Rollenprüfständen
Albers, A.; Cai, R.; Spengler, R.; Behrendt, M.
2013. 8. VDI-Fachtagung Schwingungen in Antrieben 2013 : Fulda, 5. und 6. November 2013 / VDI, Schwingungstechnik, 93–104, VDI Verlag
X-in-the-Loop: A Framework for Supporting Central Engineering Activities and Contracting Complexity in Product Engineering Processes
Albers, A.; Behrendt, M.; Schroeter, J.; Ott, S.; Klingler, S.
2013. Proceedings of the 19th International Conference on Engineering Design (ICED13), Design for Harmonies, Vol.6: Design Information and Knowledge, Seoul, Korea, 19-22.08.2013, 391–400, The Design Society
Integrated Approach for System Oriented Analyses and Optimization of Complex Hybrid Powertrain Applications by Means of Vehicle-in-the-Loop Roller Test Bench
Albers, A.; Schwarz, A.; Behrendt, M.
2013. ASME 2013 International Mechanical Engineering Congress and Exposition Volume 13: Transportation Systems San Diego, California, USA, November 15-21, 2013, The American Society of Mechanical Engineers (ASME)
Integrative Systemmodellierung von Hardware- und Softwarekomponenten in SysML am Beispiel eines innovativen Datengateways
Albers, A.; Munker, F.; Zingel, C.; Behrendt, M.
2013. Der Weg zu den technischen Systemen von morgen / Tag des Systems Engineering, Stuttgart, 6. - 8. November 2013. [Konferenz]. Hrsg.: M. Maurer, 347–355, Carl Hanser Verlag
A New Validation Concept for Globally Distributed Multidisciplinary Product Development
Albers, A.; You, Y.; Klingler, S.; Behrendt, M.; Zhang, T.; Song, K.
2013. Proceedings of 20th International Conference on Industrial Engineering and Engineering Management : Theory and Apply of Industrial Engineering, 231–242, Springer Verlag. doi:10.1007/978-3-642-40063-6_23
Method for measuring and interpreting the transfer path of acoustic phenomena in the drivetrain of a battery electric vehicle
Albers, A.; Fischer, J.; Behrendt, M.; Lieske, D.
2013. Drivetrain for vehicles 2013, transmissions in commercial vehicles 2013, control solutions for transmissions 2013 : Friedrichshafen, June 18 - 19, 2013 / [International VDI Congress Drivetrain for Vehicles 2013 ; International VDI Conferences Transmissions in Commercial Vehicles 2013, Control Solutions for Transmissions 2013]. VDI Society Product and Process Design, 191–206, VDI Verlag
Validierungsmethoden für moderne Kupplungssysteme
Albers, A.; Brezger, F.; Merkel, P.; Stier, C.
2013. Konstruktion, 65 (1/2), 16–19
Methodische Entwicklung, Synthese und Analyse im Bereich innovativer Antriebssysteme
Albers, A.; Behrendt, M.; Schille, F.
2013. Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, 2, 11–13
Challenges of Model-Based Systems Engineering: A Study towards Unified Term Understanding and the State of Usage of SysML
Albers, A.; Zingel, C.
2013. Smart Product Engineering : Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013, 83–92, Springer Verlag. doi:10.1007/978-3-642-30817-8_9
Einfluss der Tragschicht auf das Reibwertverhalten organischer Friktionswerkstoffe in trockenlaufenden Kupplungen
Albers, A.; Schepanski, N.
2013. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben 2013 : mit Fachausstellung ; Karlsruhe, 05. und 06. März 2013 / VDI, Produkt- und Prozessgestaltung, 91–100, VDI Verlag
Schaltroboter schaltet im automatisierten Prüfstandbetrieb wie ein Mensch
Albers, A.; Pinner, T.
2013. Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, 2, 15–16
Implementierung des integrierten Produktentstehungsmodells iPeM in MS SharePoint
Albers, A.; Braun, A.
2013. Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, 1, 19–20
Die Fakultäten sind in der Verantwortung, die Qualität abzusichern
Albers, A.; Braun, A.
2013. Deutsche Universitätszeitung, 7, 16–17
Time efficient testing of hybrid electric vehicles using automated identificated physical model structures
Albers, A.; Schwarz, A.; Hettel, R.; Behrendt, M.
2013. Applied Mechanics and Materials, 391, 118–122. doi:10.4028/www.scientific.net/AMM.391.118
Ensuring functional reliability of molded micro components
Albers, A.; Turki, T.; Hoppen, P.
2013. Microsystem Technologies, 19 (3), 395–402. doi:10.1007/s00542-012-1634-6
Verbesserte Ausschoepfung vorhandener Innovationspotentiale durch Kopplung von Prozess-, Wissens- und Methodenmanagement
Albers, A.; Radimersky, A.; Turki, T.
2013. Vorausschau und Technologieplanung: 8. Symposium für Vorausschau und Technologieplanung, Berlin, 6. und 7. Dezember 2012. Hrsg.: J. Gausemeier, Heinz-Nixdorf-Inst
Methods for Clutch Dimensioning
Albers, A.; Ott, S.; Merkel, P.
2013. Proceedings of the FISITA 2012 World Automotive Congress. Vol 5: Advanced Transmission System and Driveline, 39–48, Springer Verlag. doi:10.1007/978-3-642-33744-4_5
Obstacles for cognitive analogy in analysis and synthesis in microsystems development
Albers, A.; Börsting, P.; Matthiesen, S.
2013. Microsystem Technologies, 19 (3), 371–378. doi:10.1007/s00542-012-1627-5
An approach to rating of vehicle climate controls in hybrid and electric driven vehicles for energy efficiency
Brezger, F.; Albers, A.
2013. Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2012 : presented at ASME 2012 International Mechanical Engineering Congress and Exposition; November 9 - 15, 2012, Houston, Texas, USA. Vol. 11: Transportation systems, 317–325, The American Society of Mechanical Engineers (ASME). doi:10.1115/IMECE2012-88888
Modelling of Oil Heating of Disengaged Lubricated Clutches in Hybrid Vehicles
Brezger, F.; Albers, A.
2013. Proceedings of the FISITA 2012 World Automotive Congress. Vol 5: Advanced Transmission System and Driveline, 479–494, Springer Verlag. doi:10.1007/978-3-642-33744-4_42
System-Oriented Validation Aspects of a Driver Assistance System Based on an Accelerator-Force-Feedback-Pedal
Albers, A.; Schwarz, A.; Zingel, C.; Schroeter, J.; Behrendt, M.
2013. Proceedings of the FISITA 2012 World Automotive Congress. Vol. 12: Intelligent Transport System (ITS) & Internet of Vehicles, 221–233, Springer Verlag. doi:10.1007/978-3-642-33838-0_20
Extended Flexible Environment and Vehicle Simulation for an Automated Validation
Albers, A.; Hettel, R.; Behrendt, M.; Düser, T.; Schwarz, A.
2013. FISITA World Automotive Congress - Beijing, China, 27-30 November 2012. Vol. 8: Vehicle Design and Testing (II), 1263–1273, Springer Verlag. doi:10.1007/978-3-642-33738-3_28
An Operating System for the Optimization of Technical Systems Using the Example of Transmission Calibration
Albers, A.; Schwarz, A.; Behrendt, M.; Hettel, R.
2013. Proceedings of the FISITA 2012 World Automotive Congress. Vol. 8: Vehicle Design and Testing (II), 1449–1460, Springer Verlag. doi:10.1007/978-3-642-33738-3_44
2012
Development of a new Torso-Joint for the humanoid robot ARMAR
Sander, C.; Soworka, T.; Albers, A.
2012. Journal of Mechanical Engineering and Automation, 2 (4), 58–64. doi:10.5923/j.jmea.20120204.02
Acoustic Emission Analysis in the Early Stage of Heavy Duty Hydrodynamic - Hydrostatic Hybrid Pod Drive Bearing Development
Nguyen, H. T.; Gold, S.; Weber, J.; Albers, A.
2012. 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012 (CM 2012 and MFPT 2012), London, United Kingdom, 12. - 14. June, 2012, Red Hook
Anpassung dynamischer Eigenschaften von Bauteilen durch Numerische Optimierung
Hessenauer, B.; Albers, A.
2012. Maschinenakustik 2012: Wettbewerbsvorteil durch geräuscharme Produkte. 5. VDI-Fachtagung, Karlsruhe, 13.-14. November 2012, VDI Verlag
Aktivitätenbasierte Analyse von Produktentstehungsprozessen
Braun, A.; Ebel, B.; Albers, A.
2012. Tag des Systems Engineerings, Paderborn, 7.-9.11.2012. Hrsg.: M. Maurer, 415–424, Carl Hanser Verlag
Produktentstehung - ein mentales Modell
Albers, A.; Marxen, L.
2012. Innovation Excellence: Wie Unternehmen ihre Innovationsfähigkeit systematisch steigern. Hrsg.: S. Ili, 307–328, Symposion Publishing GmbH
Energy-Efficient Hydrodynamic Journal Bearings by Means of Closed-Loop Controlled Lubrication Flow
Albers, A.; Nguyen, H. T.; Burger, W.
2012. ASME/STLE International Joint Tribology Conference - Symposium on Science and Technology for Condition-Based Monitoring - Los Angeles, California, USA, October 24 - 26, 2011, 345–350, The American Society of Mechanical Engineers (ASME). doi:10.1115/IJTC2011-61002
KaLeP: Karlsruher Lehrmodell für Produktentwicklung. Ein Ansatz zur Kompetenzerfassung in der Ingieursausbildung
Albers, A.; Burkardt, N.; Becke, C.
2012. Kompetenzen in der Kompetenzerfassung : Ansätze und Auswirkungen der Vermessung von Bildung. Hrsg.: M. Pfadenhauer, 75–86, Juventa Verlag
Towards Handling Complexity - Testing the iPeM Process Modelling Approach
Albers, A.; Braun, A.
2012. Tools and methods of competitive engineering : proceedings of the Ninth International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, May 7 - 11, 2012, Karlsruhe, Germany / [jointly organized by the Delft University of Technology, the Netherlands, and the Karlsruhe Institute of Technology, Germany]. Ed. by Imre Horváth, Faculty of Industrial Design Engineering
Mission XiL
Albers, A.; Behrendt, M.
2012. IPG Technology Conference "apply & innovate 2012", Ettlingen 18.09.-19.09.2012
Method for time-saving capturing of characteristic gear-shifting diagrams of vehicles on the rollertest bench carried out with dual clutch transmissions
Albers, A.; Schwarz, A.; Behrendt, M.; Hettel, R.
2012. 6th International Symposium and Exhibition, Innovative Automotive Transmissions, Hybrid & Electric Drives, Rochester, MI, USA, 13-16 May 2012, CTI
Micro-scale investigations of mixed lubricated systems by means of the finite element method
Albers, A.; Lorentz, B.
2012. Symposium Elektromobilität an der Technischen Akademie Esslingen (TAE), 20. Juni 2012, Ostfildern
Einfluss der Mikrotopografie auf das tribologische Verhalten am Beispiel des Umschlingungsgetriebe
Albers, A.; Drechsler, S.
2012. Tribologie- und Schmierstoffkongress, 28./29. März 2012, Würzburg
Determination of the influence of load parameters on the friction behavior of multidimensional not stationary tribological contacts
Albers, A.; Drechsler, S.
2012. Reibung, Schmierung und Verschleiß. Werkstoffe und Werkstofftechnologien, dünne Schichten und Oberflächentechnologien, Maschinenelemente und Antriebstechnik, Fahrzeugtechnik. Tribologie-Fachtagung ; 53 (Göttingen) : 2012.09.24-26, Gesellschaft für Tribologie e.V. (GfT)
Experiences and Advancements from One Year of Explorative Application of an Integrated Model-Based Development Technique Using C&C²-A in SysML
Zingel, C.; Albers, A.; Matthiesen, S.; Maletz, M.
2012. International Journal of Computer Science, 39 (2), 165–181
Combined real and virtual domain product validation using top-down strategies
Geier, M.; Jäger, S.; Stier, C.; Albers, A.
2012. Vehicle Property Validation, Bad Nauheim, June 19-20, 2012
Erweiterte Topologieoptimierung zur Steigerung der Energieeffizienz bei dynamisch bewegten Systemen
Sander, C.; Petrich, D.; Albers, A.
2012. NAFEMS Konferenz ’Berechnung und Simulation - Anwendungen, Entwicklungen, Trends’, Bamberg, 8.-9. Mai 2012
Supporting Validation in the Development of Design Methods
Marxen, L.; Albers, A.
2012. Proceedings of DESIGN 2012 - the 12th International Design Conference, Dubrovnik, Croatia, May 21-24, 2012. Ed.: D. Marjanovic, 1009–1018, University of Zagreb
On the impact of machining on the friction behavior of mixed lubricated contacts
Lorentz, B.; Albers, A.
2012. 39th Leeds-Lyon Symposium on Tribology, Leeds, United Kingdom, September 4-7, 2012
Combined real and virtual domain product validation using top-down strategies
Geier, M.; Jäger, S.; Stier, C.; Albers, A.
2012. ASME Verification and Validation Symposium, Las Vegas, Nevada/USA, May 2-4, 2012
Improving Acces to micro-specific Knowledge with Ontologies
Albers, A.; Turki, T.; Schmalenbach, H.
2012. 9th International Symposium on Tools and Methods of Competitive Engineering (TMCE’12), Karlsruhe, May 7-11, 2012
Entwicklungsumgebung zur automatisierten optimalen Konfiguration und Erstellung von optimierten echtzeitfähigen Gesamtfahrzeugverbrauchsmodellen
Albers, A.; Schröter, J.; Behrendt, M.
2012. Simulation und Test für die Automobilelektronik IV. : 5. Tagung Simulation und Test für die Automobilelektronik, Mai 2012 Berlin. Hrsg.: C. Gühmann, 408–420, expert-Verlag
Method for time-saving capturing of characteristic gear-shifting diagrams of vehicles on test stand carried out with dual clutch transmissions
Albers, A.; Schwarz, A.; Behrendt, M.; Hettel, R.
2012. 6th International CTI Symposium and Exhibition, Rochester, Michigan/USA, May 21-23, 2012
Optimierung von Krafteinleitungselementen in Kunststoff-Metall-Hybridverbunden
Albers, A.; Majic, N.; Spadinger, M.; Paul, H.
2012. NAFEMS Konferenz ’Berechnung und Simulation - Anwendungen, Entwicklungen, Trends’, Bamberg, 8.-9. Mai 2012
An approach to investigate mixed lubricated systems in the micro scale by means of the coupled-eulerian-lagrangian method
Albers, A.; Lorentz, B.
2012. Proceedings of the ASME 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, November 12-18, 2010. Vol. 9: Mechanics of Solids, Structures and Fluids, 553–561, The American Society of Mechanical Engineers (ASME)
Stiffening of sheet-metal with failure-free bead patterns
Albers, A.; Majic, N.; Krönauer, B.; Hoffmann, H.
2012. Proceedings of the ASME 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, November 12-18, 2010. Vol. 3: Design and manufacturing. Pt. B, 875–883, The American Society of Mechanical Engineers (ASME)
A new process for configuration and application of complex validation environments using the example of vehicle-in-the-loop at the roller test bench
Albers, A.; Düser, T.
2012. Proceedings of the ASME 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, November 12-18, 2010. Vol. 11: New Developments in Simulation Methods and Software for Engineering Applications; Safety Engineering, Risk Analysis and Reliability Methods; Transportation Systems, 807–816, The American Society of Mechanical Engineers (ASME)
Investigation into the Feasibility of an Onboard Weight and Balance System for Rotary Wing Aircraft with Wheeled Landing Gear
Zingel, C.; Albers, A.; Matthiesen, S.; Maletz, M.
2012. IAENG international journal of computer science, 39 (2), 165–181
Acoustic Emission Analysis in the Early Stage of Heavy Duty Hydrodynamic - Hydrostatic Hybrid Pod Drive Bearing Development
Nguyen, H. T.; Gold, S.; Weber, J.; Albers, A.
2012. CM 2012/MFPT 2012: Proceedings of the 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, London, UK, 12-14 June 2012, 1 CD-Rom, The British Institute of NT
Dynamic behaviour and sealing performance of piston rings used in squeeze-film-dampers
Jäger, S.; Bruchmüller, T.; Albers, A.
2012. Sealing Technology, 2012 (11), 9–13. doi:10.1016/S1350-4789(12)70485-3
Optimierung der Schallabstrahlung von Gehäusestrukturen
Hessenauer, B.; Albers, A.; Ott, S.
2012. Maschinenakustik 2012: Wettbewerbsvorteil durch geräuscharme Produkte. 5. VDI-Fachtagung, Karlsruhe, 13. und 14. November 2012, 43–53, VDI Verlag
Variations in functional decomposition for an existing
Eckert, C.; Ruckpaul, A.; Alink, T.; Albers, A.
2012. SME Verification and Validation Symposium ((V&V2012)), Las Vegas, Nevada, May 2-4, 2012, 1 CD-Rom, The American Society of Mechanical Engineers (ASME)
Variations in functional decomposition for an existing product: Experimental results
Eckert, C.; Ruckpaul, A.; Alink, T.; Albers, A.
2012. AI EDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26 (2), 107–128. doi:10.1017/S0890060412000029
Produktentstehung - ein mentales Modell
Albers, A.; Marxen, L.
2012. Innovation Excellence: wie Unternehmen ihre Innovationsfähigkeit systematisch steigern. Hrsg.: I. Serhan, 307–328, Symposion Publishing
Hybrid Reinforcement Learning-based approach for agent motion control
Albers, A.; Obando, H. S.; Gudematsch, C.
2012. 2012 IEEE International Conference on Industrial Technology (ICIT 2012), Athens, Greece, March 19 - 21, 2012, 160–165, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICIT.2012.6209931
Improving Hands-On Education by Introducing a Mechanical Components Model Suitcase
Albers, A.; Nguyen, H. T.; Burkardt, N.
2012. International Conference on Engineering Education 2012 - Abstract Book, Turku, Finland, July 30 - August 3, 2012. Ed.: J. Björkqvist, 36, Turku University of Applied Sciences
Energy-efficient hydrodynamic journal bearings by means of condition monitoring and lubrication flow control
Albers, A.; Nguyen, H. T.; Burger, W.
2012. International Journal of Condition Monitoring, 2 (1), 18–21. doi:10.1784/204764212800028860
Influence of micro textures on the tribological contact and tribological behavior on the example of a CVT
Albers, A.; Drechsler, S.; Merkel, P.
2012. Proceedings of the ASME/STLE International Joint Tribology Conference - 2012 : presented at ASME/STLE 2012 International Joint Tribology Conference, October 7 - 10, 2012, Denver, Colorado, USA, 247–250, The American Society of Mechanical Engineers (ASME)
Integrated Modelling of Information to Support Product Engineering Processes
Albers, A.; Braun, A.; Pinner, T.
2012. Proceedings of the 2nd International Workshop on Modelling and Management Engineering Processes, Cambridge, United Kingdom, November 29-30, 2012. Ed.: P. Heisig, Cambridge
Faszination Konstruktion : Berufsbild und Tätigkeitsfeld im Wandel
Albers, A.; Denkena, B.
2012. (S. Matthiesen, Ed.), Springer Verlag
Time-efficient method for test-based optimization of technical systems using physical models
Albers, A.; Schwarz, A.; Behrendt, M.; Hettel, R.
2012. International Mechanical Engineering Congress and Exposition (IMECE2012), Houston, Texas, November 9-15, 2012, 1 CD-Rom, The American Society of Mechanical Engineers (ASME)
Automatische Identifizierung und Analyse von NVH Phänomenen im Fahrzeug auf dem Rollenprüfstand
Albers, A.; Schwarz, A.; Hettel, R.; Behrendt, M.
2012. Fortschritte der Akustik: DAGA 2012. Tagungsband der 38. Jahrestagung für Akustik, Darmstadt, 19. - 22. März 2012. Hrsg.: H. Hanselka, 1 CD-Rom, Dt. Ges. für Akustik
Zielsystemorientiertes Variantenmanagement einbaufertiger Systembaugruppen
Albers, A.; Walch, M.; Lohmeyer, Q.
2012. Design for X: Beiträge zum 23. DfX-Symposium Oktober 2012. Hrsg.: D. Krause, 187–198, Tutech Verlag
Establishing CAD and PDM as part of engineering education in large classes for undergraduate students
Geier, M.; Jäger, S.; Maier, T.; Albers, A.
2012. Design education for future wellbeing: Proceedings of the 14th International Conference on Engineering and Product Design Education, Antwerp, Belgium, September 6-7, 2012. Ed.: L. Buck, 41–46, The Design Society
Transfer of engineering experience by shared mental models
Albers, A.; Turki, T.; Lohmeyer, Q.
2012. Design education for future wellbeing: Proceedings of the 14th International Conference on Engineering and Product Design Education, Antwerp, Belgium, September 6-7, 2012. Ed.: L. Buck, 77–82, The Design Society
Assessment of design competencies by a five level model of expertise
Albers, A.; Turki, T.; Lohmeyer, Q.
2012. Design education for future wellbeing: Proceedings of the 14th International Conference on Engineering and Product Design Education, Antwerp, Belgium, September 6-7, 2012. Ed.: L. Buck, 305–310, The Design Society
Individuelle und organisatorische Akzeptanz von Methoden des Systems Engineering
Albers, A.; Lohmeyer, Q.; Radimersky, A.
2012. Tag des Systems Engineering: Zusammenhänge erkennen und gestalten, Paderborn, 7. - 9. November 2012. Hrsg.: M. Maurer, 351–362, Carl Hanser Verlag
An Ontology-Representation of the Integrated Product Engineering Model
Albers, A.; Braun, A.; Schmalenbach, H.
2012. Gain competitive advantage by managing complexity: Proceedings of the 14th International DSM Conference, Kyoto, Japan, 2012. Ed.: M. Onishi, 357–369, Carl Hanser Verlag
Integrated Modelling of Product- and Process-Related Information
Albers, A.; Braun, A.; Salomon, S.
2012. Gain competitive advantage by managing complexity: Proceedings of the 14th International DSM Conference, Kyoto, Japan, 2012. Ed.: M. Onishi, 239–251, Carl Hanser Verlag
Dependency structure matrix modelling for human resource allocation
Albers, A.; Breitschuh, J.; Lohmeyer, Q.
2012. Gain competitive advantage by managing complexity: Proceedings of the 14th International DSM Conference, Kyoto, Japan, 2012. Ed.: M. Onishi, 371–383, Carl Hanser Verlag
Modeling and Validation of a back-torque limiter using the example of a BMW motorcycle power train
Albers, A.; Merkel, P.; Geier, M.; Dreher, I.; Staedele, H.
2012. Development trends of motorcycles IV: 5th International Conference "Development Trends of Motorcycles". Ed.: C. Stan, 6/1–15, expert-Verlag
Advanced Systems Engineering - Forschung an einer innovativen Produktentwicklungssystematik
Albers, A.; Zingel, C.; Behrendt, M.
2012. Konstruktion, 2012 (11-12), 69–70
Ontology-grounded test facility requirements definition
El-Haji, M.; Freudenmann, T.; Albers, A.; Gauterin, F.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 1113–1124, Delft University of Technology (TU Delft)
Improving access to micro-specific knowledge with an ontology
Albers, A.; Turki, T.; Schmalenbach, H.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 465–476, Delft University of Technology (TU Delft)
Towards handling complexity - Testing the IPEM process modeling approach
Albers, A.; Braun, A.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 293–304, Delft University of Technology (TU Delft)
Systems of objectives in complex product development
Albers, A.; Ebel, B.; Lohmeyer, Q.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 267–278, Delft University of Technology (TU Delft)
Advanced systems engineering - Towards a model-based and human-centered methodology
Albers, A.; Lohmeyer, Q.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 407–416, Delft University of Technology (TU Delft)
A Numerical Method for Investigating Mixed Lubrication Phenomena
Albers, A.; Lorentz, B.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 357–368, Delft University of Technology (TU Delft)
A numerical way for investigating the impact of surface roughness on mixed lubrication friction
Albers, A.; Lorentz, B.
2012. Proceedings of NORDTRIB 2012: 15th Nordic Symposium on Tribology, 12-15 June 2012 Trondheim, Norway. Ed.: N. Espallargas, 1 CD, NTNU
Development of a new validation environment for CFD simulations on the example of a lubricated clutch
Albers, A.; Brezger, F.; Koch, C.
2012. Getriebe in Fahrzeugen 2012 = Drivetrain for vehicles 2012. Internationaler VDI-Kongress, Friedrichshafen, June 19-20, 2012, 443–460, VDI Verlag
Systematisch zu Mobilitätslösungen
Albers, A.; Behrendt, M.; Ott, S.
2012. Automobil-Konstruktion, 2012 (2), 38–39
KaLeP: Karlsruher Lehrmodell für Produktentwicklung. Ein Ansatz zur Kompetenzerfassung in der Ingenieurausbildung
Albers, A.; Burkardt, N.; Becke, C.
2012. Kompetenzen in der Kompetenzerfassung: Ansätze und Auswirkungen der Vermessung von Bildung. Hrsg.: M. Pfadenhauer, 75–86, Juventa Verlag
2011
Integration von Funktionsprüfung und dimensioneller Messtechnik zu einer optimierten Qualitätssicherungsstrategie für Mikroverzahnungen
Albers, A.; Lanza, G.; Becke, C.; Viering, B.; Sadowski, E.
2011. A. Weckenmann (Ed.), Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen Hrsg.: Weckenmann, Albert, 5–18, Shaker Verlag
Konstruktionselemente des Maschinenbaus, Übungsbuch
Sauer; Albers, A.; Deters; Feldhusen; Leidich; Linke; Poll; Wallaschek
2011. Springer Verlag. doi:10.1007/978-3-642-16801-7
Zwischenstandsbericht FVA 620: Entwicklung eines Berechnungsverfahrens für die Fresssicherheit von CVT mit Umschlingungsmitteln
Albers, A.; Stahl, K.; Drechsler, S.; Idler, S.
2011. FVA Informationstagung 2011, 23. - 24. November 2011, Würzburg
NVH topology optimization for compact structures
Albers, A.; Hessenauer, B.; Krauss, P.; Schmid, A.
2011. A world of engineering simulation : industrial needs, best practice, visions for the future; NWC, NAFEMS world congress 2011, 13. International Congress on Simulation Technology for the Engineering Analysis Community - Boston, USA, 23 - 26 May 2011, NAFEMS
Produktionstechnische Innovationen in der Batteriefertigung - Produkt und Produktionssystem simultan entwickeln
Albers, A.; Fleischer, J.; Schabel, W.
2011. VDMA Auftakt-Event "Industriekreis Batterieproduktion", Frankfurt, 7. Oktober 2011
Managing complex simulation processes : the generalised contact and channel model
Albers, A.; Enkler, H.-G.; Ottnad, J.
2011. International journal of product development, 13 (3), 204–221. doi:10.1504/IJPD.2011.040267
A Functions Catalogue to Support Distributed and Hybrid Micro Systems Development
Albers, A.; Börsting, P.
2011. 9th High Aspect Ratio Micro Structure Technology Conference, HARMST 2011, Taiwan, June 12-18, 2011
Interdisciplinary Systems Modeling using the Contact & Channel-Model for SysML
Albers, A.; Zingel, C.
2011. Proceedings of the 18th International Conference on Engineering Design ICED 2011, Copenhagen, DK, August 15-18, 2011, 196–207
Simulation von Anfahrvorgängen mit Kupplungsrupfen auf Basis experimentell ermittelter Antriebsstrang-Dämpfungseigenschaften
Albers, A.; Stier, C.
2011. Fachtagung Schwingungen in Antrieben 7, Leonberg, 19.-20. Okt, 2011, 195–206, VDI Verlag
A new Perspective on Product Engineering - Overcoming Sequential Process Models
Albers, A.; Sadowski, E.; Marxen, L.
2011. The future of design methodology. Ed.: H. Birkhofer, 199–210, Springer Verlag
Modellierungsansätze für die Simulation variabelaxial faserverstärkter Kunststoff-Verbunde
Albers, A.; Majic, N.; Troll, D.
2011. NAFEMS Seminar - Fortschritte in der Simulation von Composites, April 6-7 2011, Wiesbaden, Germany
Friction- and Wear-Detection in clutch lining by acoustic emission and RNT
Albers, A.; Kelemen, S.
2011. Proceedings of the 10th International Tribology Conference ; University of Pretoria Conference Centre, Pretoria, South Africa, 5-7 April 2011
Detektion von Reibung und Verschleiß an trockenlaufenden Friktionssystemen mit Hilfe der Körperschallanalyse
Albers, A.; Kelemen, S.
2011. News / Berliner Kreis, Wissenschaftliches Forum für Produktentwicklung e.V., 2011
Advances in Dry Wear Measurement by Acoustic Emission Analysis Compared to Radionuclide Technique
Albers, A.; Kelemen, S.
2011. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2011, August 28-31, 2011 in Washington, DC
TRIZ-Box - Improving Creativity by connecting TRIZ and Artifacts
Albers, A.; Deigendesch, T.; Schmalenbach, H.
2011. Procedia engineering, 9, 214–221. doi:10.1016/j.proeng.2011.03.113
Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung
Albers, A.; Burkardt, N.
2011. Handbuch Leichtbau : Methoden, Werkstoffe, Fertigung, Carl Hanser Verlag
Phenomena-Based Methods in Powertrain Validation
Albers, A.; Brezger, F.; Geier, M.; Freudenmann, T.; Stier, C.
2011. 10th International Symposium and Exhibition, Innovative Automotive Transmissions and Hybrid & Electric Drives, Berlin, Germany, 5. – 8. December, 2011
Handbuch Leichtbau
Albers, A.; Braun, A.
2011. Handbuch Leichtbau : Methoden, Werkstoffe, Fertigung, 5–30, Carl Hanser Verlag. doi:10.3139/9783446428911
Der ganz normale Verkehr - Forschung für die Mobilität von morgen
Albers, A.; Behrendt, M.; Rietschel, U.
2011. Spiegel der Wirtschaft Baden-Württemberg, 8–9
Der Prozess der Produktentstehung
Albers, A.; Braun, A.
2011. Handbuch Leichtbau : Methoden, Werkstoffe, Fertigung / F. Henning, 5–30, Carl Hanser Verlag
Konstrukteurfähigkeiten heute und morgen
Denkena, B.; Albers, A.; Dengler, B.; Hoppen, P.
2011. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 106 (10), 726–730
Energetische Modellierung von Schaltvorgängen mit Hilfe statistischer Versuchsplanung als Voraussetzung optimaler Betriebsstrategien
Radke, T.; Roth, M.; Gauterin, F.; Schröter, J.; Albers, A.; Weyand, T.; Schmall, T.
2011. 4. Internationales Symposium für Entwicklungsmethodik, Wiesbaden, 8.–9. November 2011
A numerical model for mixed lubrication taking into account surface topography, tangential adhesion effects and plastic deformations
Lorentz, B.; Albers, A.
2011. 38th Leeds-Lyon Symposium on Tribology, Lyon, France, September 6-9, 2011
Supporting Microsystem Technology Design through provision of Experience
Albers, A.; Turki, T.
2011. 9th International Workshop on High Aspect Ratio Micro Structure Technology (HARMST’11), Hsin-chu, Taiwan, June 12-18, 2011
Enhanced Approach for Computation of Predictive, Fuel Efficient Vehicle Operation Strategies based on a self-learning Algorithm
Albers, A.; Schröter, J.; Frietsch, M.; Sommer, H.
2011. 56th International Scientific Colloquium, Ilmenau, September 12-16, 2011
Validation activities in the X-in-the-loop framework on the example of model based methods
Albers, A.; Geier, M.; Merkel, P.
2011. Vehicle Property Validation, Bad Nauheim, September 7-9, 2011 - Conference Proceedings, 275–290, Vincentz Network GmbH
Integrated modular maneuver and road based optimization environment regarding a new method
Albers, A.; Schroeter, J.; Behrendt, M.
2011. Programme and proceedings - 13th EAEC European Automotive Congress, Valencia, 13 June - 16 June 2011, 1 CD-ROM, European Automobile Engineers Cooperation (EAEC)
Condition Monitoring of friction contacts with Acoustic Emissions
Albers, A.; Kelemen, S.
2011. 38th Leeds-Lyon Symposium on Tribology, Lyon, France, September 6-9, 2011
Micro texturing of the tribological contact in a CVT
Albers, A.; Drechsler, S.; Bernhardt, J.; Ott, S.
2011. ECOTRIB 2011: 3rd European Conference on Tribology in tandem with Viennano ’11: 4th Vienna International Conference on Nano-Technology, Wien, Austria, June 7 - 9, 2011. Ed.: F. Franek, 1 CD-Rom, Österreichische Tribologische Gesellschaft
Ansätze zur Strukturoptimierung für Faserverbundbauteile mit variabelaxialer Faserorientierung für den extremen Leichtbau
Spickenheuer, A.; Uhlig, K.; Heinrich, G.; Majic, N.; Albers, A.
2011. Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde, Chemnitz, 30. März - 1. April 2011. Hrsg.: B. Wielage, 579–584, Technische Universität Chemnitz
Support for Micro-Tolerancing through the Feedback of Existing Quality-Related Data to Product Developers
Lanza, G.; Albers, A.; Kippenbrock, K.; Börsting, P.
2011. Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011. Ed.: H. Spaan, 542–545, European Society for Precision Engineering and Nanotechnology (euspen)
Different notions of function: results from an experiment on the analysis of an existing product
Eckert, C.; Alink, T.; Ruckpaul, A.; Albers, A.
2011. Journal of Engineering Design, 22 (11-12), 811–837. doi:10.1080/09544828.2011.603297
Abbildung von Erfahrungswissen zur Unterstützung des Entwurfsprozesses in der Mikrotechnik
Albers, A.; Turki, T.
2011. Proceedings / Mikrosystemtechnik-Kongress 2011, Darmstadt, 10. - 12. Oktober 2011, 1 CD-Rom, VDE Verlag
New Approach for Computation of predictive, fuel efficient Vehicle Operation Strategies based on a self-learning Algorithm
Albers, A.; Schroeter, J.; Frietsch, M.; Sommer, H.
2011. Automotive and engine technology: Proceedings of the 11th Stuttgart International Symposium, Stuttgart, Germany, February 22-13, 2011, Vol. 1, 165–184, ATZlive
Erweitertes X-in-the-Loop-Framework zur automatisierten Optimierung der Analyse, Validierung und Synthese
Albers, A.; Schroeter, J.
2011. Von der Idee zum abgesicherten Konzept: Betrachtungen von Prozess, Methoden, Systemen und des Menschen in der Konzeptauslegung von Fahrzeugen. 4. Grazer Symposium Virtuelles Fahrzeug, Graz, 12. - 13. Mai 2011, Graz
A CAE-based approach for an automatic identification of lightweight design strucures in entire systems
Albers, A.; Schmid, A.; Zhang, Q.; Grönheim, O.
2011. Seminar: the Role of CAE in System Simulation, Wiesbaden, Germany, November 8-9, 2011, NAFEMS
Physische Interaktion mit fliegenden Robotern - Ein neuer Ansatz
Albers, A.; Frietsch, M.; Burger, W.
2011. Tagungsband Mechatronik 2011, Dresden, 31. März - 1. April 2011. Hrsg.: T. Bertram, 95–100, Technische Universität Dresden (TU Dresden)
Antrieb für ein neues Handgelenkkonzept für den humanoiden Roboter ARMAR
Albers, A.; Sander, C.; Burger, W.
2011. Tagungsband Mechatronik 2011, Dresden, 31. März - 1. April 2011. Hrsg.: T. Bertram, 229–234, Technische Universität Dresden (TU Dresden)
Indoor Pass-by noise testing on a roller test bench in a small anechoic chamber
Albers, A.; Robens, G.
2011. Proceedings of Inter-Noise 2011: 40th International Congress and Exposition on Noise Control Engineering, Osaka, Japan, September 4-7, 2011, 1 DVD - Rom, Osaka
Komfortobjektivierung für NVH und Akustik mittels künstlicher neuronaler Netze
Albers, A.; Ott, S.; Behrendt, M.
2011. Proceedings / Automotive Acoustics Conference: 1st international ATZ conference, Zurich, Germany, July 7-8, 2011, 1 CD-Rom, ATZlive
Advances in Wear Measurement by Acoustic Emission Analysis Compared to Radionuclide Technique
Albers, A.; Kelemen, S. G.
2011. Proceedings of the ASME/STLE International Joint Tribology Conference 2011, Los Angeles, California, USA, October 24 - 26, 2011, 351–356, The American Society of Mechanical Engineers (ASME)
Energy-Efficient Hydrodynamic Journal Bearings By Means Of Automatic Lubrication Flow Control
Albers, A.; Nguyen, T. G.
2011. Proceedings of the ASME/STLE International Joint Tribology Conference 2011, Los Angeles, California, USA, October 24 - 26, 2011, 345–350, The American Society of Mechanical Engineers (ASME)
FEM-Modeling of Newly Designed Electrical Contacts
Albers, A.; Martin, P.; Lorentz, B.; Burger, W.
2011. IN-TECH 2011: Proceedings of the International Conference on Innovative Technologies, Bratislava, September 1-9, 2011. Ed.: J. Kudlaek, Czech Technical University
Abstract Modeling and resulting Design of Contacts in Electrical Connectors
Albers, A.; Martin, P.; Burger, W.
2011. IN-TECH 2011: Proceedings of the International Conference on Innovative Technologies, Bratislava, September 1-9, 2011. Ed.: J. Kudlaek, Czech Technical University
Nasslaufende Lamellenkupplungen - Potenziale ingenieurkeramischer Werkstoffe
Bernhardt, J.; Albers, A.
2011. Reibung, Schmierung und Verschleiß: Forschung und praktische Anwendungen. 52. Tribologie-Fachtagung, Göttingen, 26. bis 28. September 2011; Bd. 2, 45, Gesellschaft für Tribologie e.V. (GfT)
Steigerung der Energieeffizienz von stationären hydrodynamischen Gleitlagern durch aktive Regelung des Schmiermitteldurchflusses und Condition Monitoring mittels Körperschallanalyse
Albers, A.; Nguyen, H. T.; Burger, W.
2011. Reibung, Schmierung und Verschleiß: Forschung und praktische Anwendungen. 52. Tribologie-Fachtagung, Göttingen, 26. bis 28. September 2011; Bd. 1, 33, Gesellschaft für Tribologie e.V. (GfT)
A finite element model for investigating the surface roughness’ influence on mixed lubricated contacts
Albers, A.; Lorentz, B.
2011. Reibung, Schmierung und Verschleiß: Forschung und praktische Anwendungen. 52. Tribologie-Fachtagung, Göttingen, 26. bis 28. September 2011; Bd. 1, 6, Gesellschaft für Tribologie e.V. (GfT)
Entwicklung und Validierung einer Untersuchungsmethode für Quetschöldämpfer
Albers, A.; Jäger, S.; Blutke, R.; Klingsporn, M.
2011. Reibung, Schmierung und Verschleiß: Forschung und praktische Anwendungen. 52. Tribologie-Fachtagung, Göttingen, 26. bis 28. September 2011; Bd. 1, 40, Gesellschaft für Tribologie e.V. (GfT)
System Architecture Modeling in a Software Tool Based on the Contact and Channel Approach
Albers, A.; Braun, A.; Sadowski, E.; Wynn, D. C.; Wyatt, D. F.; Clarkson, P. J.
2011. Journal of Mechanical Design, 133 (10), 101006/1–8. doi:10.1115/1.4004971
Development and validation of lubricated multi-disc clutch systems with advanced ceramics
Albers, A.; Bernhardt, J.; Ott, S.
2011. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (7), 611–615. doi:10.1177/1350650110396017
Micro Gas Turbine Development: Design Improvements using Design Patterns
Albers, A.; Börsting, P.; Turki, T.
2011. Micro and nanosystems, 3 (3), 250–253. doi:10.2174/1876402911103030250
Ein Funktionskatalog zur Unterstützung verteilter und hybrider Produktentstehungsprozesse in der Mikrosystemtechnik
Albers, A.; Börsting, P.; Matthiesen, S.
2011. Proceedings / Mikrosystemtechnik-Kongress 2011, Darmstadt, 10. - 12. Oktober 2011; 1 CD-Rom, 956–959, VDE Verlag
A generalised framework to compass and to support complex product engineering processes
Albers, A.; Braun, A. C.
2011. International Journal of Product Development, 15 (1-3), 6–25. doi:10.1504/IJPD.2011.043659
Ontology development for knowledge representation
Albers, A.; Schmalenbach, H.; Lohmeyer Q.
2011. International Journal of Product Development, 14 (1-4), 53–71. doi:10.1504/IJPD.2011.042293
TRIZ-Box in education - a study on supporting creativity
Albers, A.; Lohmeyer, Q.; Schmalenbach, H.
2011. Design education for creativity and business innovation: Proceedings of the 13th International Conference on Engineering and Product Design Education, London, UK, September 8-9, 2011. Ed.: A. Kovacevic, 143–149, Design Soc
Interdisciplinary Functional Systems Modeling Approach Applied for Hybrid Powertrain Development
Albers, A.; Zingel, C.; Maletz, M.
2011. Proceedings of the World Congress on Engineering and Computer Science 2011, WCECS 2011, San Francisco, USA, October 19 - 21, 2011. Vol. II. Ed.: S. I. Ao, 1135–1140, Newswood Ltd
Modeling and Design of Contacts in Electrical Connectors
Albers, A.; Martin, P.; Lorentz, B.
2011. Impacting society through engineering design: ICED 11 København. Proceedings of the 18th International Conference on Engineering Design, Copenhagen, Denmark, August 15th-18th, 2011. Vol. 4: Product and systems design. Ed.: S. Culley, 268–277, The Design Society
Dimensions of objectives in interdisciplinary product development projects
Albers, A.; Lohmeyer, Q.; Ebel, B.
2011. Impacting society through engineering design: ICED 11 København. Proceedings of the 18th International Conference on Engineering Design, Copenhagen, Denmark, August 15th-18th, 2011. Vol. 2: Design theory and research methodology. Ed.: S. Culley, 256–265, The Design Society
Interdisciplinary Systems Modeling using the Contact and Channel-Model for SYSML
Albers, A.; Zingel, C.
2011. Impacting society through engineering design: ICED 11 København. Proceedings of the 18th International Conference on Engineering Design, Copenhagen, Denmark, August 15th-18th, 2011. Vol. 9: Design methods and tools Pt. 1. Ed.: S. Culley, 196–207, The Design Society
Compact structures by dynamic topology optimization
Albers, A.; Hessenauer, B.; Krauss, P.; Schmid, A.
2011. A world of engineering simulation: industrial needs, best practice, visions for the future. Proceedings of the NAFEMS World Congress 2011, Boston, USA, 23 - 26 May, NAFEMS
A Numerical Approach to Investigate Mixed Lubrication Phenomena
Albers, A.; Lorentz, B.; Hessenauer, B.
2011. A world of engineering simulation: industrial needs, best practice, visions for the future. Proceedings of the NAFEMS World Congress 2011, Boston, USA, 23 - 26 May, NAFEMS
Approaches for the Macroscale Curvilinear Modeling of Continuous Fiber Composites
Albers, A.; Troll, D.; Majic, N.
2011. A world of engineering simulation: industrial needs, best practice, visions for the future. Proceedings of the NAFEMS World Congress 2011, Boston, USA, 23 - 26 May, NAFEMS
Validierung eines Prüfstandes für Quetschöldämpfer mittels rechnerbasierter Methoden
Albers, A.; Jäger, S.; Blutke, R.
2011. Schwingungsdämpfung: 2. VDI-Fachtagung, Leonberg, 16. und 17. November 2011, 59–80, VDI Verlag
Experimentelle Analyse der Dämpfung in PKW-Antriebssträngen in Hinblick auf die Übertragung von Anfahrschwingungen
Albers, A.; Stier, C.
2011. Schwingungsdämpfung: 2. VDI-Fachtagung, Leonberg, 16. und 17. November 2011, 169–180, VDI Verlag
Approach for determining an optimized gearshift strategy
Albers, A.; Schröter, J.; Behrendt, M.; Robens, G.; Zingel, C.
2011. Getriebe in Fahrzeugen 2011: Effizienzsteigerung im Antrieb Kultur- und Congress-Centrum; Friedrichshafen, June 7-8, 2011, 231–244, VDI Verlag
A New Perspective on Product Engineering Overcoming Sequential Process Models
Albers, A.; Sadowski, E.; Marxen, L.
2011. The Future of Design Methodology. Ed.: H. Birkhofer, 199–209, Springer
Potenziale ingenieurkeramischer Friktionswerkstoffe in schaltbaren Kupplungen
Albers, A.; Bemhardt, J.; Ott, S.
2011. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben, Wiesloch bei Heidelberg, 22. und 23. März 2011, 129–138, VDI Verlag
Prozessbegleitende Validierung in der Kupplungssystementwicklung
Albers, A.; Behrendt, M.; Ott, S.
2011. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben, Wiesloch bei Heidelberg, 22. und 23. März 2011, 1–14, VDI Verlag
Kupplungsmodell zur Beschreibung des Kupplungssystemverhaltens
Albers, A.; Ott, S.; Späth, C.
2011. VDI-Fachtagung Kupplungen und Kupplungssysteme in Antrieben, Wiesloch bei Heidelberg, 22. und 23. März 2011, 211–220, VDI Verlag
Energy-efficient hydrodynamic journal bearings by means of condition monitoring and lubrication flow control
Albers, A.; Nguyen, H. T.; Burger, W.
2011. Insight - Non-Destructive Testing and Condition Monitoring, 53 (8), 431–433. doi:10.1784/insi.2011.53.8.431
Energieeffizienzsteigerung von stationär betriebenen hydrodynamischen Gleitlagern durch aktive Regelung des Schmiermitteldurchflusses
Albers, A.; Nguyen, H. T.; Burger, W.
2011. Gleit- und Wälzlagerungen: Gestaltung, Berechnung, Einsatz. Tagungsband, Schweinfurt, 24. und 25. Mai 2011, 1 CD-Rom, VDI Verlag
Modeling Approaches for the Simulation of Curvilinear Fiber-Reinforced Polymer Composites
Albers, A.; Majic, N.; Troll, D.
2011. Seminar: Progress in Simulating Composites, Wiesbaden, Germany, April 6-7, 2011, 16, NAFEMS Deutschland, Österreich, Schweiz GmbH
Approaches for the macroscale curvilinear modeling of composites based on the fiber patch preforming (FPP) technology
Albers, A.; Majic, N.; Troll, D.
2011. Proceedings of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites, Hannover, Germany, September 21-23 2011. Ed.: R. Rolfes, Leibniz Universität
Condition Monitoring of dry friction contacs with Acoustic Emission Analyses
Albers, A.; Kelemen, S.
2011. Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Cardiff, Wales, June 20 - 22, 2011, 1 CD-Rom, Coxmoor Publ
Eine mastgeführte Kletterbühne als alternative Montagevorrichtung für Offshore-Windenergieanlagen
Albers, A.; Kelemen, S.
2011. News / Berliner Kreis, Wissenschaftliches Forum für Produktentwicklung e.V, 16 (1), 12–13
Erfolgsfaktoren der Interdisziplinarität. Ein Bericht
Albers, A.; Ebel, B.; Alink, T.
2011. Wissenschaft im Kontext : Inter- und Transdisziplinarität in Theorie und Praxis. Hrsg.: G. Banse, 203–214, trafo-Wiss.-Verl
Validierung im Produktentstehungsprozess
Albers, A.; Düser, T.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 133–142, Carl Hanser Verlag
Systemleichtbau - ganzheitliche Gewichtsreduzierung
Albers, A.; Burkardt, N.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 115–132, Carl Hanser Verlag
Virtuelle Produktentwicklung
Albers, A.; Majic, N.; Schmid, A.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 77–114, Carl Hanser Verlag
Der Prozess der Produktentstehung
Albers, A.; Braun, A.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 5–30, Carl Hanser Verlag
Der ganz normale Verkehr - Forschung für die Mobilität von morgen
Albers, A.; Behrendt, M.; Rietschel, U.
2011. Spiegel der Wirtschaft Baden-Württemberg, 8–9
A Numerical Model for Investigating Mixed Lubricated Systems taking into account Adhesion Effects and Surface Roughness
Albers, A.; Lorentz, B.
2011. ECOTRIB 2011: 3rd European Conference on Tribology in tandem with Viennano ’11: 4th Vienna International Conference on Nano-Technology, Wien, Austria, June 7 - 9, 2011. Ed.: F. Franek, 1 CD-Rom, Österreichische Tribologische Gesellschaft
Micro Structuring of the Tribological Contact in a CVT
Albers, A.; Drechsler, S.; Bernhardt, J.; Ott, S.
2011. ECOTRIB 2011: 3rd European Conference on Tribology in tandem with Viennano ’11: 4th Vienna International Conference on Nano-Technology, Wien, Austria, June 7 - 9, 2011. Ed.: F. Franek, 1 CD-Rom, Österreichische Tribologische Gesellschaft
Increasing Energy-Efficiency of Hydrodynamic Journal Bearings by Closed-Loop Lubrication Flow Control and Condition Monitoring
Albers, A.; Nguyen, H. T.; Burger, W.
2011. ECOTRIB 2011: 3rd European Conference on Tribology in tandem with Viennano ’11: 4th Vienna International Conference on Nano-Technology, Wien, Austria, June 7 - 9, 2011. Ed.: F. Franek, 1 CD-Rom, Österreichische Tribologische Gesellschaft
Integration von Funktionsprüfung und dimensioneller Messtechnik zu einer optimierten Qualitätssicherungsstrategie für Mikroverzahnungen
Albers, A.; Lanza, G.; Becke, C.; Viering, B.; Sadowski, E.
2011. Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen: Abschlussbericht DFG-Schwerpunktprogramm 1159 StraMNano. Hrsg.: A. Weckenmann, 5–18, Shaker Verlag
Vom Sonderforschungsbereich 499 zum Zentrum für Integrierte Mikrofertigung
Albers, A.; Börsting, P.; WIldermuth, C.; Haußelt, J.; Kraft, O.
2011. Kraft, O. [Hrsg.] Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11.-12.Oktober 2011, Karlsruhe KIT Scientific Reports, KIT-SR 7591 (Oktober 2011), 5–17
Vom Sonderforschungsbereich 499 zum Zentrum für Integrierte Mikrofertigung
Albers, A.; Börsting, P.; WIldermuth, C.; Haußelt, J.; Kraft, O.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium des Sonderforschungsbereichs 499 ’Mikro-Urformen’, Karlsruhe, 11.-12.Oktober 2011
Entwicklung einer ontologiebasierten Entwicklungsumgebung für tribologisch hochbeanspruchte Systeme auf Basis ingenieurkeramischer Werkstoffe
Albers, A.; Schmalenbach, H.
2011. Abschlusskolloquium Sonderforschungsbereich 483 "Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe", 25. Oktober 2011, Kongresszentrum Karlsruhe. Hrsg.: A. Albers, 151–161, KIT Scientific Publishing
Kupplungssystementwicklung für Fahrzeuge unter der Anwendung ingenieurkeramischer Friktionssysteme zur Steigerung der systemischen Leistungsdichte
Albers, A.; Ott, S.; Babik, A.; Bernhardt, J.
2011. Abschlusskolloquium Sonderforschungsbereich 483 "Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe", 25. Oktober 2011, Kongresszentrum Karlsruhe. Hrsg.: A. Albers, 129–139, KIT Scientific Publishing
Potenziale ingenieurkeramischer Werkstoffe in nasslaufenden Friktionssystemen
Bernhardt, J.; Albers, A.
2011. Abschlusskolloquium Sonderforschungsbereich 483 "Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe", 25. Oktober 2011, Kongresszentrum Karlsruhe. Hrsg.: A. Albers, 105–114, KIT Scientific Publishing
Validierung von Mikrokomponenten und -systemen durch Simulationen und Prüfstandsversuche
Albers, A.; Lanza, G.; Turki, T.; Hoppen, P.; Troll, D.; Kippenbrock, K.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11. - 12. Oktober 2011, Karlsruhe. Hrsg.: O. Kraft, 97–104, KIT Scientific Publishing
Vom Sonderforschungsbereich 499 zum Zentrum für Integrierte Mikrofertigung (ZIM)
Albers, A.; Börsting, P.; Wildermuth, C.; Haußelt, J.; Kraft, O.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11. - 12. Oktober 2011, Karlsruhe. Hrsg.: O. Kraft, 5–17, KIT Scientific Publishing
2010
Car-to-X-in-the-Loop -- Entwicklungsumgebung für Fahrzeuge, Steuergeräte und Kommunikationssysteme im Kontext zukünftiger Mobilitätskonzepte
Roth, C.; Sander, O.; Düser, T.; Glas, B.; Seifermann, A.; Albers, A.; Becker, J.; Müller-Glaser, K.; Henning, J.
2010. 26. VDI-VW-Gemeinschaftstagung Fahrerassistenz und Integrierte Sicherheit Tagung Wolfsburg, 6. - 7. Oktober, 2010, 67–80, VDI Verlag
Influence of low-frequency powertrain-vibrations on driveability-assessments
Albers, A.; Zingel, C.; Zehetner, J.; Meitz, K.
2010. SAE International. doi:10.4271/2010-01-1419
Automation of driveability researches in different test-environments using the example of a positive load change-maneuver
Albers, A.; Zingel, C.; Zehetner, J.
2010. Proceedings des 10. Internationales Stuttgarter Symposiums, Automobil- und Motorentechnik, Stuttgart, 16. -17. März, 2010, Forschungsinstitut für Kraftfahrwesen und Fahrzeugmotoren Stuttgart
Integrated driveability assessment and optimization environment on a roller test bench
Albers, A.; Zingel, C.
2010. Global Powertrain Congress 2010, Munich, Germany, 22. - 23. September, 2010, 86–91, Red Hook
ARMAR III - A humanoid robot connecting humans and technology
Albers, A.; Sauter, C.; Frietsch, M.
2010. Proceedings of International Conference on Innovative Technologies, IN-TECH, Prague, Czech Republic, 14. - 16. September, 2010, International Conference in Innovative Technologies / In-Tech
Systembasierende Topologieoptimierung in geregelten dynamischen Systemen mit Newton Regelung von mehreren Komponenten des humanoiden Roboters ARMAR (SFB 588)
Albers, A.; Sander, C.
2010. Schweizer Maschinenelemente Kolloquium SMK 2010, 9. - 10. November, 2010, TUDpress
Indoor pass-by noise testing of hybrid electrical vehicles on an acoustic roller test bench
Albers, A.; Robens, G.; Schwarz, A.; Fritz, M.; Schmitz, J.
2010. 39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010, Lisbon, Portugal, 13. - 16. June, 2010, 3440–3449, Portuguese Acoustical Society
Application and evaluation of optical distance measurements in geometrical quality testing of microgears
Albers, A.; Duotai, P.; Marxen, L.; Becke, C.
2010. Frontiers of mechanical engineering in China, 5 (3), 261–269. doi:10.1007/s11465-010-0100-3
Method and Tool of Human Sensation Modeling for Comfort Evaluation of NVH Phenomenon on the Example of Gear Rattle
Albers, A.; Lerspalungsanti, S.
2010. Book of abstracts : World Automotive Congress 2010, FISITA : Budapest, Hungary, 30 May - 4 June 2010, Gépipari Tudományos Egyesület = Scientific Association for Mechanical Engineering (GTE)
Improving Positioning Accuracy of Robotic Systems by Using Environmental Support Constraints – A New Bionic Approach
Albers, A.; Frietsch, M.; Sander, C.
2010. Second International Conference on Social Robotics (ICSR), Singapore, November 23-24, 2010. Ed.: S. Ge, 192–201, Springer Verlag. doi:10.1007/978-3-642-17248-9_20
Methods for Simulating and Optimizing Molded Micro Components and Systems
Albers, A.; Enkler, H.-G.; Leslabay, P.
2010. Microsystem technologies, 16 (8-9), 1517–1527. doi:10.1007/s00542-010-1073-1
Five Hypotheses about Engineering Processes and their Consequences
Albers, A.
2010. Proceedings of the TMCE 2010, Ancona, I, April 12-16, 2010
Integrated Structural and Controller Optimization in Dynamic Mechatronic Systems
Albers, A.; Ottnad, J.
2010. Journal of mechanical design, 132 (4), 041008/1–8. doi:10.1115/1.4001380
Zwischenbericht FVA 416 II: Verbesserter Kraftschluss im Umschlingungs-CVT durch optimierte Oberflächenmikrostrukturierung
Albers, A.; Poll, G.; Ott, S.; Mach, N.; Drechsler, S.
2010. Forschungsvereinigung Antriebstechnik e. V. (FVA)
System- und Friktionsverhalten eines prototypenhaft umgesetzten Kupplungssystems mit ingenieurkeramischen Friktionswerkstoffen
Albers, A.; Mitariu-Faller, M.; Ott, S.
2010. Tribologie und Schmierungstechnik, 57 (3), 15–20
Analysis of running unlubricated friction pairings under permanent slip with an emphasis on advanced ceramic-steel pairings
Albers, A.; Meid, M.
2010. Nordtrib 2010: Proceedings of the 14th Nordic Symposium on Tribology, 8-11 June 2010, Stoforsen, Sweden. Ed. : P. Marklund
Best-Practice für die Ingenieurpromotion - Die Assistenzpromotion am IPEK - Institut für Produktentwicklung
Albers, A.; Behrendt, M.; Sadowski, E.; Braun, A.
2010. Karlsruher Institut für Technologie (KIT)
Matching of micro gears via dimensional metrology and functional testing
Lanza, G.; Albers, A.; Viering, B.; Becke, C.
2010. 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010, Delft, Netherlands, 31. May - 4. June, 2010, 51–54, European Society for Precision Engineering and Nanotechnology (euspen)
Produktentstehung am Beispiel integrativer Ansätze
Albers, A.
2010. Karlsruher Institut für Technologie (KIT)
Five hypotheses and a meta model of engineering design processes
Albers, A.
2010. Tools and Methods of Competitive Engineering ; 8th International Symposium, Ancona, Italy (TMCE) : 2010.04.12-16. Vol. 1. Ed.: I. Horváth, 343–356, Faculty of Industrial Design Engineering
Car-to-X-in-the-Loop - Entwicklungsumgebung für Fahrzeuge, Steuer-geräte und Kommunikationssysteme im Kontext zukünftiger Mobilitätskonzepte
Roth, C.; Sander, O.; Düser, T.; Glas, B.; Seifermann, A.; Albers, A.; Becker, J.; Müller-Glaser, K.; Henning, J.
2010. 26. VDI-VW-Gemeinschaftstagung Fahrerassistenz und Integrierte Sicherheit - Tagung Wolfsburg, 6.-7. Oktober 2010, 67–80, VDI Fachmedien
Influence of production constraints on automatic generation of bead design
Krönauer, B.; Majic, N.; Hoffmann, H.; Albers, A.
2010. 13th International ESAFORM Conference on Material Forming, Brescia, Italy, April 7-9, 2010
Automated Bead Design Considering Production Constraints
Kronauer, B.; Majic, N.; Golle, M.; Hoffmann, H.; Albers, A.
2010. NUMIFORM 2010 - Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes - Pohang, Korea, June 13-17, 2010. Ed.: F. Barlat, 1247–1255, American Institute of Physics (AIP). doi:10.1063/1.3457525
Zwischenbericht FVA 620: Entwicklung eines Berechnungsverfahrens für die Fresssicherheit von CVT mit Umschlingungsmitteln
Höhn, R.; Albers, A.; Pflaum, H.; Ott, S.; Idler, S.; Drechsler, S.
2010. FVA Informationstagung, Würzburg, 23.-24. November 2010
Different Function Breakdowns for One Existing Product: Experimental Results
Alink, T.; Eckert, C.; Ruckpaul, A.; Albers, A.
2010. Design Computing and Cognition ’10 : papers in this volume are from the Fourth International Conference on Design Computing and Cognition (DDC ’10) held at the University of Stuttgart, Germany. Ed.: J. S. Gero, 405–424, Springer Netherlands. doi:10.1007/978-94-007-0510-4_22
Semi-autonomous flying robot for physical interaction
Albers, A.; Trautmann, S.; Howard, T.; Nguyen, T. A.; Frietsch, M.; Sauter, C.
2010. IEEE Conference on Robotics Automation and Mechatronics (RAM’10), Singapore, June 28-30, 2010, 441–446, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/RAMECH.2010.5513152
A New Approach for Solving Positioning Tasks of Robotic Systems Based on Reinforcement Learning
Albers, A.; Sommer, H.; Frietsch, M.
2010. Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium - Zadar, Croatia, October 20-23, 2010. Ed.: B. Katalinic, 613–614, DAAAM International
Validation of AE-signals recorded with conventional Equipment using 3D-Scanning-Laser-Vibrometer
Albers, A.; Schell, J.; Dickerhof, M.; Hessenauer, B.
2010. 29th European Conference on Acoustic Emission Testing (EWGAE’10), Wien, Österreich, 8.-10. September 2010, 1–8
ARMAR III - A humanoid robot connecting humans and technology
Albers, A.; Frietsch, M.; Sauter, C.
2010. International Conference on Innovative Technologies (INTECH’10), Prague, Czech Republic, September 14-16, 2010
Development of the Actuation of a New Wrist for the Next Generation of the humanoid Robot ARMAR
Albers, A.; Sander, C.; Simsek, A.
2010. 10th IEEE-RAS International Conference on Humanoid Robots, Nashville, Tennessee/USA, December 6-8, 2010, 677–682, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICHR.2010.5686838
Development of a lightweight Unmanned Aerial Vehicle for rescue and maintenance tasks
Albers, A.; Sander, C.; Kindermann, M.
2010. Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium - Zadar, Croatia, October 20-23, 2010. Ed.: B. Katalinic, 925–926, DAAAM International
Systembasierende Topologieoptimierung in geregelten dynamischen Systemen mit Newton Regelung von mehreren Komponenten des humanoiden Roboters ARMAR
Albers, A.; Sander, C.
2010. Schweizer Maschinenelemente Kolloquium (SMK’10), Rapperswil, Schweiz, 9.-10. November 2010, TUDpress Verlag der Wissenschaften
Development of a New 2 DOF Lightweight Wrist for the Humanoid Robot ARMAR
Albers, A.; Ottnad, J.; Sander, C.
2010. Advances in Robot Manipulators. Ed.: E. Hall, 238–254, Intech. doi:10.5772/9544
A new two-layer reinforcement learning approach the control of a 2DOF manipulator
Albers, A.; Schillo, S.; Sonnleithner, D.; Frietsch, M.; Meckl, P.
2010. 8th IEEE International Conference on Control and Automation (ICCA’10), Xiamen, China, June 9-11, 2010, 546–551, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICCA.2010.5524384
Rechnergestützte Entwicklung hochdynamisch belasteter Prüfstandskomponenten
Albers, A.; Jäger, S.; Hessenauer, B.
2010. Test Facility Forum (TFF’10), Frankenthal, September 28-29, 2010
Establishing CAD and PDM as part of engineering education in large classes for undergraduate students
Albers, A.; Geier, M.; Maier, T.; Jäger, S.
2010. International Conference on Engineering Education (ICEE’10), Gliwice, Poland, July 18-22, 2010
Development of an unmanned aerial vehicle for physical interaction
Albers, A.; Frietsch, M.; Trautmann, S.; Howard, T.
2010. International Conference on Innovative Technologies (INTECH 2010), Prague, Czech Republic, September 14-16, 2010
Multiple Q-Update Approach for Reinforcement Learning using Similarities of Adjacent States
Albers, A.; Frietsch, M.; Schillo, S.
2010. Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium - Zadar, Croatia, October 20-23, 2010. Ed.: B. Katalinic, 911–912, DAAAM International
Entwicklung einer integrierten Kraftmessung für Antriebsmodule im Humanoiden Roboter
Albers, A.; Frietsch, M.; Sander, C.; Ottnad, J.
2010. Entwurf mechatronischer Systeme - Grundlagen, Methoden und Werkzeuge - Adaption, Selbstoptimierung und Verlässlichkeit - Integration Mechanik und Elektronik, Miniaturisierung - 7. Paderborner Workshop Entwurf Mechatronischer Systeme, Paderborn, 18.-19. März 2010. Hrsg.: J. Gausemeier, 143–156, Heinz Nixdorf Institut (HNI)
Development of a highly integrated torque sensor concept for drive units of a humanoid robot
Albers, A.; Frietsch, M.; Sander, C.; Ottnad, J.
2010. ISR/ROBOTIK 2010 : Proceedings for the joint conference of ISR 2010 (41st International Symposium on Robotics) und ROBOTIK 2010 (6th German Conference on Robotics); 7-9 June 2010, 6 S., CD-ROM, VDE Verlag
A new bionically inspired approach to increase positioning accuracy of robotic systems
Albers, A.; Hörter, S.; Frietsch, M.
2010. IEEE Conference on Robotics Automation and Mechatronics (RAM’10), Singapore, June 28-30, 2010, 510–515, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/RAMECH.2010.5513140
Increasing positioning accuracy of flexible robots by means of a novel bionically inspired approach
Albers, A.; Frietsch, M.; Hörter, S.
2010. International Conference on Innovative Technologies, Prague, Czech Republic, September 14-16, 2010
A New Robotics Laboratory for Interdisciplinary Mechatronic Education
Albers, A.; Frietsch, M.; Bartenbach, V.; Robens, G.; Burkardt, N.
2010. Proceedings of SIMPAR 2010 Workshops - International Conference on Simulation, Modeling and Programming for Autonomous Robots, Darmstadt, November 15-16, 2010, 456–464, InTech
Effiziente Entwicklung mechatronischer Systeme - Einsatz genetischer Algorithmen bei frühen Entwicklungsaktivitäten
Albers, A.; Enkler, H.-G.; Frietsch, M.; Yan, W.
2010. Mechatronic Konferenz, Karlsruhe, 19.-20. Mai 2010
Mechatronic laboratory in the interdisciplinary program of study in the new bachelor/master system
Albers, A.; Burkardt, N.; Robens, G.; Frietsch, M.
2010. 8th European Mechatronics Meeting International Conference and Exhibition (EMM’10), Haut Savoie, France, June 2-3, 2010
The impact of peripheral components on gear development concerning investigation of comfort relevant manoeuvres
Albers, A.; Brezger, F.; Geier, M.
2010. Getriebe in Fahrzeugen 2010 - Internationaler VDI-Kongress Getriebe in Fahrzeugen 2010 - Kultur- und Congress-Centrum Graf-Zeppelin-Haus, Friedrichshafen, 22. und 23. Juni 2010, 487–502, VDI Fachmedien
Ein Beitrag zum Verständnis des Aktivitätsbegriffs im System der Produktentstehung
Albers, A.; Braun, A.; Muschik, S.
2010. Tag des Systems - Engineering. Hrsg.: M. Maurer, 87–96, Carl Hanser Verlag
Piraterierisiken erkennen und systematisch Maßnahmen definieren
Albers, A.; Braun, A.; Marxen, L.
2010. Technische Überwachung, 51 (7-8), 37–39
Function-based Contact and Channel Modelling in the Development of an Innovative Car
Albers, A.; Braun, A.
2010. 12th International Dependency and Structure Modelling Conference (DSM’10), Cambridge, United Kingdom, July 22-23, 2010
Development and validation of lubricated multi-disk clutch systems with advanced ceramics
Albers, A.; Bernhardt, J.; Ott, S.
2010. Mechanical Properties and Performance of Engineering Ceramics and Composites V - 34th International Conference on Advanced Ceramics and Composites, ICACC’10; Daytona Beach, FL; United States; 24 January 2010 through 29 January 2010. Ed.: Dileep Singh, John Wiley and Sons. doi:10.1002/9780470944127.ch29
Micro gear validation: improving the correlation between virtual and physical testing
Albers, A.; Börsting, P.; Deigendesch, T.; Enkler, H.-G.; Leslabay, P.
2010. Microsystem technologies, 16 (8-9), 1529–1535. doi:10.1007/s00542-009-0997-9
Potenzialabschätzung mechatronischer Aktuatorik in batteriebetriebenen Elektro-Fahrzeugen
Albers, A.; Babik, A.; Brezger, F.
2010. Mechatronic Konferenz, Karlsruhe, 19.-20. Mai 2010, Karlsruher Institut für Technologie (KIT)
Potenzialabschätzung mechatronischer Aktuatorik in Fahrzeugen mit alternativen Antriebssträngen
Albers, A.; Babik, A.; Brezger, F.
2010. Zusammenspiel von Maschinenbau, Elektronik und Software - der Weg zum Gesamtfahrzeug - 3. Grazer Symposium Virtuelles Fahrzeug, Graz, 6.-7. Mai 2010, Graz
3D-LDV für die experimentelle Modalanalyse und den Abgleich mit komplexen FE-Modellen
Albers, A.; Maier, T.
2010. 11. Vibrometer Anwenderkonferenz, Waldbronn, 26.-27. Oktober 2010
Echtzeitfähiges Gesamtfahrzeugsimulationsmodell
Albers, A.; Schroeter, J.; Herdel, S.
2010. 4. Tagung Simulation und Test in der Funktions- und Softwareentwicklung für die Automobilelektronik, Berlin, 30. Mai - 1 Juni 2010
Validation as knowledgebase for future mobility systems
Albers, A.; Ott, S.; Behrendt, M.; Merkel, P.; Geier, M.
2010. 9. Internationales CTI Symposium, Berlin, November 29 - December 2, 2010
Multi-scale investigations of lubricated friction contacts of CVTs
Albers, A.; Ott, S.; Behrendt, M.; Bernhardt, J.; Drechsler, S.
2010. CVT Hybrid International Conference, Maastricht, Netherlands, November 17-19, 2010
Car2X-in-the-Loop - Development Platform for Vehicles, Control Units and Communication Systems
Albers, A.; Düser, T.; Sander, O.; Roth, C.; Glas, B.; Seifermann, A.; Becker, J.; Müller-Glaser, K.; Henning, J.
2010. International Conference ’apply & innovate’, Ettlingen, September 15-16, 2010
Umgebungssimulation am Rollenprüfstand - Neue Möglichkeiten zur Untersuchung der Energieeffizienz
Albers, A.; Düser, T.
2010. AVL Tech Day ’Hybrid-Testing’, Darmstadt, March 23, 2010
Numerical investigations in mixed friction systems
Albers, A.; Lorentz, B.; Nowicki, L.
2010. International Journal of Multiphysics, 4 (1), 83–94. doi:10.1260/1750-9548.4.1.83
Ansätze zur Komfortsteigerung eines trockenlaufenden Kupplungssystems mit ingenieurkeramischen Friktionswerkstoffen
Meid, M.; Albers, A.; Ott, S.
2010. Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. 51. Tribologie-Fachtagung, Göttingen, 27. bis 29. September 2010, 1 CD-Rom, Ges. für Tribologie
Untersuchung der Ölströmung in geschmierten Friktionssystemen am Beispiel einer nasslaufenden Lamellenkupplung
Albers, A.; Bernhardt, J.; Ott, S.
2010. Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. 51. Tribologie-Fachtagung, Göttingen, 27. bis 29. September 2010, 1 CD-Rom, Ges. für Tribologie
A model to investigate the influence of surface roughness on the tribological behavior of dry friction systems
Albers, A.; Savio, D.; Lorentz, B.
2010. Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. 51. Tribologie-Fachtagung, Göttingen, 27. bis 29. September 2010, 1 CD-Rom, Ges. für Tribologie
Numerical investigations of mixed lubricated systems taking into account surface roughness
Albers, A.; Lorentz, B.
2010. Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. 51. Tribologie-Fachtagung, Göttingen, 27. bis 29. September 2010, 1 CD-Rom, Ges. für Tribologie
A numerical approach to investigate mixed friction systems in the micro scale by means of the coupled Eulerian-Lagrangian method
Albers, A.; Lorentz, B.
2010. ASIM-Treffen STS/GMMS 2010: Workshop der ASIM/GI-Fachgruppe Simulation technischer System (STS) sowie Grundlagen und Methoden in Modellbildung und Simulation (GMMS)m, Ulm, 4./5. März 2010. Hrsg.: H.-T. Mammen, 1 CD-Rom, Hochschule
On the importance of handling objectives in design education project work
Albers, A.; Lohmeyer, Q.; Alink, T.
2010. When design education and design research meet: Proceedings of the 12th International Conference on Engineering and Product Design Education, Trondheim, Norway, September 2nd - 3rd, 2010. Ed.: C. Boks, 438–443, The Design Society
Contact & Channel Modellbildung am Beispiel eines Anti-Hopping-Systems für verbrennungsmotorische Antriebe
Albers, A.; Merkel, P.; Geier, M.
2010. ASIM-Treffen STS/GMMS 2010: Workshop der ASIM/GI-Fachgruppe Simulation technischer System (STS) sowie Grundlagen und Methoden in Modellbildung und Simulation (GMMS)m, Ulm, 4./5. März 2010. Hrsg.: H.-T. Mammen, 1 CD-Rom, Hochschule
INNO5 - Innovation in einer Woche, Neue Lösungen für technische Federn
Albers, A.; Turki, T.
2010. News / Berliner Kreis: Mitteilungen des Berliner Kreis, 14 (1), 8
Virtuelle Versuchsplanung durch Simulation von elektrischen Prüfstandsantrieben am Beispiel der Schwingungsuntersuchung am Kfz-Antriebsstrang
Berger, J.; Stier, C.; Albers, A.; Zöller, T.; Leibfried, T.
2010. Erprobung und Simulation in der Fahrzeugentwicklung: Mess- und Versuchstechnik. 15. VDI-Tagung, Baden-Baden, 16. und 17. November 2010, 269–282, VDI Verlag
Methode zur kombinierten Bewertung der Energieeffizienz und der Fahrbarkeit von Fahrzeugen
Albers, A.; Schwarz, A.; Düser, T.; Bogner, E.
2010. Erprobung und Simulation in der Fahrzeugentwicklung: Mess- und Versuchstechnik. 15. VDI-Tagung, Baden-Baden, 16. und 17. November 2010, 283–296, VDI Verlag
Entwicklungsumgebung zur freien Konfiguration und Erstellung von echtzeitfähigen Gesamtfahrzeugverbrauchsmodellen
Albers, A.; Schroeter, J.; Herdel, S.
2010. Simulation und Test für die Automobilelektronik III: vom Konzept bis zur Serie. 4. Tagung ’Simulation und Test für die Automobilelektronik’, Berlin, Mai/Juni 2010. Hrsg.: C. Gühmann, 65–74, expert-Verlag
Funktionsorientierte Produktmodellierung in frühen Phasen von Entwicklungsprozessen
Albers, A.; Sadowski, E.; Braun, A.
2010. Herausforderungen für die Produkt- und Prozessinnovation: Tagungsband, 8. Gemeinsames Kolloquium Konstruktionstechnik 2010, Magdeburg, 7. und 8. Oktober 2010. Hrsg.: K. Brökel, 145–152, Docupoint-Verl
Prüf- und Auswahlstrategie für Mikroverzahnungen
Albers, A.; Sadowski, E.; Becke, C.
2010. Industrie 4.0 Management, 26 (6), 17–19
Einflüsse auf Entscheidungsprozesse in frühen Aktivitäten der Produktentstehung
Albers, A.; Muschik, S.; Ebel, B.
2010. Vorausschau und Technologieplanung: 6. Symposium für Vorausschau und Technologieplanung, Berlin, 28. und 29. Oktober 2010. Hrsg.: J. Gausemeier, Heinz-Nixdorf-Inst
Five hypotheses and a meta model of engineering design processes
Albers, A.
2010. Tools and methods of competitive engineering: Proceedings of the Eighth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2010), Ancona, Italy, April 12 - 16, 2010. Vol. 1. Ed.: I. Horváth, 343–356, Delft University of Technology (TU Delft)
Integration of validation activities in ontology development processes
Albers, A.; Lohmeyer, Q.; Schmalenbach, H.
2010. Tools and methods of competitive engineering: Proceedings of the Eighth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2010), Ancona, Italy, April 12 - 16, 2010. Vol. 2. Ed.: I. Horváth, 1027–1040, Delft University of Technology (TU Delft)
Patterns in product development: Background, application and exemplification
Albers, A.; Deigendesch, T.
2010. Tools and methods of competitive engineering: Proceedings of the Eighth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2010), Ancona, Italy, April 12 - 16, 2010. Vol. 2. Ed.: I. Horváth, 1299–1300, Delft University of Technology (TU Delft)
Development of Systems of Objectives in Early Activities of Product Development Processes
Albers, A.; Muschik, S.
2010. Tools and methods of competitive engineering: Proceedings of the Eighth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2010), Ancona, Italy, April 12 - 16, 2010. Vol. 2. Ed.: I. Horváth, 1303–1304, Delft University of Technology (TU Delft)
Avoiding clutch excited judder by using an active clamping force control
Albers, A.; Meid, M.; Ott, S.
2010. Proceedings of ISMA 2010: International Conference on Noise and Vibration Engineering including USD2010, Leuven, Belgium, September 20 - 22, 2010. Ed. P. Sas, 1151–1166, Katholieke Universiteit Leuven (KU Leuven)
Advanced ceramic-steel pairings under permanent slip for dry running clutch systems
Albers, A.; Meid, M.
2010. Mechanical properties and performance of engineering ceramics and composites V: A collection of papers presented at the 34th International Conference on Advanced Ceramics and Composites, Daytona Beach, Florida, January 24-29, 2010. Ed.: D. Singh, 295–307, John Wiley and Sons
Automation of driveability researches in different test-environments using the example of a positive load change-maneuver ("Tip-In")
Albers, A.; Zingel, C.; Zehetner, J.
2010. Automotive and engine technology: 10th Stuttgart International Symposium, Stuttgart, March 16 - 17, 2010, 231–246, Vieweg Verlag
Manufacturing aspects in simulation based bead optimization
Albers, A.; Majic, N.; Krönauer, B.; Hoffmann, H.
2010. Automotive and engine technology: 10th Stuttgart International Symposium, Stuttgart, March 16 - 17, 2010, 605–622, Vieweg Verlag
Simulation, Optimization and Validation of high-performance Micro Mechanical Gears
Albers, A.; Enkler, H.-G.; Leslabay, P.
2010. International Conference on Gears: Europe invites the world, Garching (near Munich), Germany, October 4th to 6th, 2010. Vol. 2, 1269–1280, VDI Verlag
Implementation of a Model Based Gear Rattle Analysis Method in a Full Vehicle System Simulation
Albers, A.; Geier, M.
2010. International Conference on Gears: Europe invites the world, Garching (near Munich), Germany, October 4th to 6th, 2010. Vol. 1, 237–242, VDI Verlag
Issue driven analysis of an existing product at different levels of abstraction
Eckert, C. M.; Alink, T.; Albers, A.
2010. Proceedings of DESIGN 2010: 11th International Design Conference, Dubrovnik, Croatia, May 17 - 20, 2010. Ed.: D. Marjanovic, 673–682, The Design Society
The Role and Application of Activities in the Integrated Product Engineering Model (iPeM)
Albers, A.; Muschik, S.
2010. Proceedings of DESIGN 2010: 11th International Design Conference, Dubrovnik, Croatia, May 17 - 20, 2010. Ed.: D. Marjanovic, 127–136, The Design Society
Combining Process Model and Semantic Wiki
Albers, A.; Ebel, B.; Sauter, C.
2010. Proceedings of DESIGN 2010: 11th International Design Conference, Dubrovnik, Croatia, May 17 - 20, 2010. Ed.: D. Marjanovic, 1275–1284, The Design Society
Patterns for design in microtechnology
Albers, A.; Deigendesch, T.; Turki, T.; Müller, T.
2010. Microsystem Technologies, 16 (8-9), 1537–1545. doi:10.1007/s00542-010-1042-8
Berichte der Jahrestagung 2009 in Ulm: Workshop 3 Konstruktionsmethodik 2.0 - Durchgängig rechnerunterstützte Methoden und Prozesse
Albers, A.; Deigendesch, T.; Turki, T.
2010. News / Berliner Kreis: Mitteilungen des Berliner Kreis, 14 (1), 4
X-in-the-Loop-Framework für Fahrzeuge, Steuergeräte und Kommunikationssysteme
Albers, A.; Düser, T.; Sander, O.; Roth, C.; Henning, J.
2010. ATZ-Elektronik, 5 (5), 60–65. doi:10.1007/BF03224034
A numerical approach to investigate mixed friction systems in the micro scale
Albers, A.; Lorentz, B.
2010. Proceedings of the ASME 2010: 10th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 12-14, 2010. Vol. 1, 447–454, The American Society of Mechanical Engineers (ASME)
Contact and Channel Modelling using Part and Function Libraries in a function-based Design Approach
Albers, A.; Braun, A.; Sadowski, E.; Wyatt, D.; Wynn, D.; Clarkson, J.
2010. Proceedings of the ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Montreal, Quebec, Canada, August 15-18, 2010. Vol. 5: 22nd International Conference on Design Theory and Methodology, 393–404, The American Society of Mechanical Engineers (ASME)
Uniqueness and the Multiple Fractal Character of Product Engineering Processes
Albers, A.; Braun, A.; Muschik, S.
2010. Modelling and Management of Engineering Processes. Ed.: P. Heisig, 15–26, Springer
Application of Design Patterns for the Development of Primary Shaped Microsystems: a Case Study
Albers, A.; Börsting P.; Turki, T.
2010. Proceedings of the 7th International Conference on Multi-Material Micro Manufacture (4M2010), Bourg en Bresse and Oyonnax, France, November 17 - 19, 2010. Ed.: B. Fillon, 235–238, Research Publishing
Methodenentwicklung und -validierung am Beispiel eines innovativen Fahrzeugkonzepts für elektrisch angetriebene Fahrzeuge
Albers, A.; Babik, A.; Braun, A.; Merkel, P.; Robens, G.
2010. Die Vielfalt der Mobilität: vom Verbrenner bis zum E-Motor. 7. VDI-Tagungband Innovative Fahrzeugantriebe, Dresden, 10. und 11. November 2010, 57–66, VDI Verlag
Analysis of geometrical deviations in clutch systems and their interdependencies in relation to the excitation of judder vibrations
Stier, C.; Albers, A.
2010. Automobiles and sustainable mobility: Proceedings of the FISITA 2010 World Automotive Congress, Budapest, Hungary, May 30 - June 4, 2010, 1 CD-Rom, Gépipari Tudományos Egyesület = Scientific Association for Mechanical Engineering (GTE)
An approach to increase the efficiency of experiments applied for the analysis of a gear unit
Freudenmann, T.; El-Haji, M.; Albers, A.
2010. Automobiles and sustainable mobility: Proceedings of the FISITA 2010 World Automotive Congress, Budapest, Hungary, May 30 - June 4, 2010, 1 CD-Rom, Gépipari Tudományos Egyesület = Scientific Association for Mechanical Engineering (GTE)
Validation - Central Activity to Ensure Individual Mobility
Albers, A.; Behrendt, M.; Ott, S.
2010. Automobiles and sustainable mobility: Proceedings of the FISITA 2010 World Automotive Congress, Budapest, Hungary, May 30 - June 4, 2010, 1 CD-Rom, Gépipari Tudományos Egyesület = Scientific Association for Mechanical Engineering (GTE)
Design and prototyping of a ceramic micro turbine: a case study
Bauer, W.; Müller, M.; Knitter, R.; Börsting, P.; Albers, A.; Deuchert, M.; Schulze, V.
2010. Microsystem Technologies, 16 (4), 607–615. doi:10.1007/s00542-009-0974-3
Car-to-X-in-the-Loop - Development Environment for Vehicles, Control Units and Communication Systems in the Context of future Mobility Concepts
Becker, J.; Müller-Glaser, K. D.; Roth, C.; Sander, O.; Düser, T.; Glas, B.; Seifermann, A.; Albers, A.; Henning, J.
2010. 26. VDI-VW-Gemeinschaftstagung Fahrerassistenz und Integrierte Sicherheit, Tagung Wolfsburg, 6. und 7. Oktober 2010, VDI Verlag
Patterns for design in microtechnology
Albers, A.; Deigendesch, T.; Turki, T.; Müller, T.
2010. 8th Internat.Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST 2009), Saskatoon, CDN, June 25-28, 2009
New methods for virtual design with a focus on composite materials and structural optimisation
Schnack, E.; Albers, A.; Minx, J.; Lohmeyer, Q.
2010. International Journal of Product Development, 11 (1), 89–115. doi:10.1504/IJPD.2010.032991
2009
Simulationsgestützte Methoden – IDE und XiL zur Entwicklung von Antriebsstrangkomponenten
Geier, M.; Stier, C.; Düser, T.; Behrendt, M.; Ott, S.; Albers, A.
2009. ATZ extra, 22 (4), 48–53
Design Rules for Microcomponents
Albers, A.; Deigendesch, T.; Hauser, S.
2009. Ceramics processing in microtechnology. Ed.:H.-J. Ritzhaupt-Kleissl, 23–32, Whittles Publ
Survey of Wikis as a Design Support Tool
Walthall, C. J.; Sauter, C.; Deigendesch, T.; Albers, A.; Ramani, K.
2009. Design has never been this cool : ICED 09, the 17th International Conference on Engineering Design; 24 - 27 August 2009, Stanford University, Stanford, Califonia, USA; proceedings volume 6, part 2. Ed. M. N. Bergendahl, 211–222, The Design Society
Analyse des Drehzahleinflusses auf das dynamische Übertragungsverhalten von ZMS
Stier, C.; Geier, M.; Albers, A.
2009. Systemanalyse in der Kfz-Antriebstechnik - Bd. 5: Schwingungen im Getriebe und im Antriebsstrang - NVH-Optimierungen - Systemabstimmungen von Hybridfahrzeugen - Akustische Beurteilungen. Hrsg.: A. Laschet, 11–22, expert-Verlag
Steifigkeitsoptimierung von Faserverbundbauteilen für den extremen Leichtbau
Spickenheuer, A.; Uhlig, K.; Majic, N.; Gliesche, K.; Albers, A.; Heinrich, G.
2009. Innovationen mit textilen Strukturen - 12. Chemnitzer Textiltechnik-Tagung, 30. September und 1. Oktober 2009., 210–219, Technische Universität Chemnitz
Integration of the Contact and Channel Model with Axiomatic Design
Marques, P. A.; Saraiva, P. M.; Requeijo, J. G.; Alink, T.; Albers, A.; Guerreiro, F. F.
2009. Proceedings of the fifth international conference on Axiomatic Design (ICAD 2009), Campus de caprica, 25. - 27. März, 2009, Institute of Axiomatic Design
Komfortbewertung powertrainerregter Fahrzeugschwingungen auf Basis objektiver Kennwerte
Maier; Olfens; Albers
2009. Fachtagung Subjektive Fahreindrücke Sichtbar Machen: Korrelation zwischen objektiver Messung und subjektiver Beurteilung in der Fahrzeugentwicklung, Essen, 12. - 13. November, 2009, 64–75, expert-Verlag
Unterstützung der Produktvalidierung durch physikalische Modellbildung am Beispiel des ZMS
Geier, M.; Merkel, P.; Stier, C.; Albers, A.
2009. 6. Fachtagung Schwingungen in Antrieben 2009, Leonberg, 21.-22. Oktober 2009, 303, VDI Fachmedien
Zielgröße Energieeffizienz - Methoden zur Antriebsstrangentwicklung im Wandel
Brezger, F.; Geier, M.; Bernhardt, J.; Albers, A.
2009. Karlsruher Institut für Technologie (KIT)
Validation of powertrain systems on the example of real and virtual investigations of a dual mass flywheel in the X-in-the-Loop (XiL) environment
Albers, A.; Geier, M.; Merkel, P.; Ott, S.
2009. 8. Internationales CTI Symposium Innovative Fahrzeug-Getriebe, Berlin, 1. und 2. Dezember 2009, 13
A Two Layered Process for Early Design Activities Using Evolutionary Strategies
Albers, A.; Enkler, H.-G.; Frietsch, M.; Sauter, C.
2009. Recent advances in mechatronics : 2008 - 2009. International Conference Mechatronics ; 8 - Luhačovice, Tschechien : 2009.11.18-20. Ed.: T. Brezina, 311–316, Springer Verlag
Ein Verfahren zur Standortbestimmung und Strategiebildung von Fakultäten und Universitäten - Ein Balanced Scorecard-basierter Prozess des Peer-to-Peer-Vergleichs - Das FTMV Gütesiegel
Albers, A.; Enkler, H.-G.
2009. Zukunft Ingenieurwissenschaften - Zukunft Deutschland : Beiträge einer 4ING-Fachkonferenz und der ersten Gemeinsamen Plenarversammlung der 4ING-Fakultätentage, Aachen, 14. - 15.07.2008. Hrsg.: M. Nagl, 223–245, Springer Verlag
Contact and Channel Modeling to Support Early Design of Technical Systems
Albers, A.; Braun, A.; John, C. P.; Enkler, H.-G.; Wynn, D. C.
2009. Design has never been this cool : ICED 09, the 17th International Conference on Engineering Design, 24 - 27 August 2009, Stanford University, Stanford, California, USA, proceedings volume, Vol. 9 Hrsg.: Margareta Norell Bergendahl, 61–72, The Design Society
KALEP - An engineering education model supported by modern IT-solutions
Albers, A.; Sauter, C.; Maier, T.; Geier, M.
2009. ICEE iCEER 2009, Grand Intercontinental Hotel, Seoul, South Korea, August 23-28, 2009
Development of an engine crankshaft in a framework of Computer Aided Innovation
Albers, A.; Noel-Rovira, L.; Aguayo-Tellez, H. A.; Maier, T.
2009. Computers in industry, 60 (8), 604–612. doi:10.1016/j.compind.2009.05.017
Die Experten von morgen - Moderne Ingenieursausbildung in einem realistischen Arbeitsumfeld
Albers, A.; Maier, T.; Sauter, C.
2009. IT & production, 2008/09, 23–25
Einfluss von Werkstoffkenngrößen und Wärmehaushalt auf das tribologische Verhalten trockenlaufender Reibkupplungen = Influence of material characteristics and heat balance on the tribological behavior of dry-running friction clutches
Albers, A.; Ott. S.; Babik, A.; Späth, C.
2009. Getriebe in Fahrzeugen : Internationaler VDI-Kongress, Friedrichshafen, 30. Juni - 1. Juli 2009, 115–126, VDI Verlag
System- und Friktionsverhalten eines prototypenhaft umgesetzten Kupplungssystems mit ingenieurkeramischen Friktionswerkstoffen
Albers, A.; Mitariu-Faller, M.; Ott, S.
2009. Reibung, Schmierung und Verschleiß: Forschung und praktische Anwendungen. 50. Tribologie-Fachtagung, Göttingen, 21.-23. September 2009. Bd 2., 75/1–14, Gesellschaft für Tribologie e.V. (GfT)
High performance friction system with advanced ceramics for automotive purpose
Albers, A.; Mitariu, M.; Ott, S.
2009. Proceedings of World Tribology Congress 2009, Sunday 6th to Friday 11th, September, 2009, Kyoto, Japan, Japanese Society of Tribologists
3-D topology optimisation in combination with fibre alignment for composite structures manufactured by tailored fibre placement
Albers, A.; Majic, N.; Ottnad, J.; Spickenheuer, A.; Uhlig, K.; Heinrich, G.
2009. 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Lisboa, Portugal, June 1-5 2009, Lisbon, Portugal
Development of a housing for on-line-wear-analysis of clutch lining pads under dry friction on test benches
Albers, A.; Kelemen
2009. Annals of DAAAM for 2009 and 20th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Theory, Practice and Education"; Vienna; Austria; 25 November 2009 through 28 November 2009. Ed. B. Katalinic, 517–518, DAAAM
Design Patterns in Microtechnology
Albers, A.; Deigendesch, T.; Turki, T.
2009. DS 58-5: Proceedings of ICED 09, the 17th International Conference on Engineering Design; Palo Alto, CA; United States; 24 August 2009 through 27 August 2009, 385–396, The Design Society
Mikrogetriebe
Albers, A.; Deigendesch, T.; Börsting, P.
2009. Konstruktion, 41
Das Karlsruher Lehrmodell für Produktentwicklung (KaLeP) als Beispiel zur ganzheitlichen Integration von Projektarbeit in die universitäre Lehre
Albers, A.; Burkardt, N.; Deigendesch, T.; Robens, G.
2009. 1. Darmstädter Ingenieurkongress Bau und Umwelt : 4. und 15. September 2009; [Tagungsband]. Hrsg. : H.-J. Linke, TU Darmstadt
Vermittlung von Schlüsselqualifikationen am Beispiel des Karlsruher Lehrmodells für Produktentwicklung
Albers, A.; Burkardt, N.; Deigendesch, T.
2009. Schlüsselqualifikationen für Studium, Beruf und Gesellschaft. Technische Universitäten im Kontext der Kompetenzdiskussion, 14, 511–520
Entwicklung einer Hubbühne für den vertikalen Transport der Maschinengondel einer Offshore - Windenergieanlage
Albers, A.; Burger; Kelemen
2009. 3. Wissenschaftstage des Bundesumweltministeriums zur Offshore-Windenergienutzung, Oldenburg, 17. - 18. November, 2009, BMU
Mechatronische Konzepte zur Verbesserung der Mensch-Maschine-Interaktion
Albers, A.; Berns, K.
2009. Human Centered Robotic Systems, Bielefeld, Germany, 19. - 20. November, 2009, Springer Verlag
Methoden zur Antriebsstrangentwicklung
Albers, A.; Bernhardt; Geier
2009. Power world, 30–32
Zielgröße Energieeffizienz
Albers, A.; Bernhardt; Brezger; Ott
2009. ATZ/MTZ-Konferenz Reibungsminimierung 2009, Esslingen, 9. - 10. Dezember, 2009, ATZlive
Keramikgerechtes Konstruieren
Albers, A.; Bernhardt, J.; Meid, M.; Ott, S.
2009. DGM Fortbildungsseminar, Produktentwicklung mit keramischen Werkstoffen, Rheinbach, Germany, 09. - 10. Dezember, 2009, 1–32, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
University Of Nis As A Supraregional Academic Education Center For Product Development In South East Europe
Albers, A.; Becke, C.; Burkardt, N.
2009. Proceedings of ICED 09, the 17th International Conference on Engineering Design, Design Education and Lifelong Learning, Palo Alto, CA, USA, 24. - 27. August, 2009, 125–136, The Design Society
GEARE: Global Engineering Alliance For Research And Education -- For Engineering Students: Extensive Possibilities In Programs Focusing International Project Work and Study and Intern Abroad
Albers, A.; Becke, C.; Burkardt, N.
2009. ICEE 2009 : International Conference on Electrical Engineering, Dec 5 - 7, 2009, University of Boumerdes, Algeria
Engineering Education in South East Europe: University Niš as a Supraregional Academic Education Center For Product Development
Albers, A.; Becke, C.; Burkardt, N.
2009. ICEE 2009 : International Conference on Electrical Engineering, Dec 5 - 7, 2009, University of Boumerdes, Algeria
Internationalization And Project Work In Engineering Education: GEARE
Albers, A.; Becke, C.; Burkardt, N.
2009. 11th International Conference on Engineering and Product Design Education: Creating a Better World, E and PDE 2009, Brighton, United Kingdom, 10. - 11. September, 2009, 20–25
Interrelationship of Micro Dimensional Metrology and Micro Functional Testing for the Quality Assurance of Micro Gears
Lanza, G.; Albers, A.; Viering, B.; Becke, C.
2009. Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009, San Sebastian, Spain, 2. - 5. June, 2009. Ed.: Euspen, 187–190, European Society for Precision Engineering and Nanotechnology (euspen)
Structural and Controller Optimazion in Dynamic Mechatronic Systems
Albers, A.
2009. Emerging technologies, robotics and control systems. Ed.: S. Pennacchio, InternationalSAR
Automated Acquisition of Operation Mode Depending NVH Phenomena on a Roller Test Bench
Albers, A.; Düser, T.
2009. Automobil- und Motorentechnik : 9. Internationales Stuttgarter Symposium, Stuttgart, 24. - 25. März 2009. Ed.: A. Albers, Vieweg Verlag
Eine Methode zur Integration von Fahrversuchen in die Validierungsprozesskette
El-Haji, M.; Geier, M.; Freudenmann, T.; Albers, A.
2009. Vortrag beim FVA SIMPEP 2009 - Kongress für Simulation im Produktentstehungsprozess, 18. und 19. Juni 2009 in Veitshöchheim, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Collaborative Design Education supported by CAD/PDM and Wikis
Albers, A.; Sauter, C.; Maier, T.; Geier, M.
2009. Workshop CoDeKF - Collaborative Design and Knowledge Factory, November 17-18, 2009, Montbeliard, France, 17 S
Modern Engineering Design Education based on KaLeP and State-of-the-Art ICT solutions
Albers, A.; Sauter, C.; Maier, T.; Geier, M.
2009. Innovation in Learning Communities - What did you invent for tomorrow? Book of Abstracts and Electronic Proceedings of the EDEN 2009 Annual Conference, Gdansk, Poland, 53, Eden
KALEP - an Engineering Education Model Supported b Modern IT-Solutions
Albers, A.; Sauter, C.; Maier, T.; Geier, M.
2009. Presenation at the ICEE / ICEER 2009 - International Conference on Engineering Education & Research, 23 - 28 August 2009, Seoul, Korea
A Working Knowledge Model for Supporting Early Design through Visual Tools
Devanathan, S.; Sauter, C.; Albers, A.; Ramani, K.
2009. Proceedings of the 17th International Conference on Engineering Design, Stanford, California, USA, 24-27 Aug., 2009. Ed.: M. N. Bergendahl, The Design Society
Survey of Wikis as Design Support Tool
Walthall, C.; Sauter, C.; Deigendesch, T.; Albers, A.; Ramani, K.
2009. Proceedings of the 17th International Conference on Engineering Design, Stanford, California, USA, 24-27 Aug., 2009. Ed.: M. N. Bergendahl, The Design Society
Interpretation von Körperschallemissionen bei der simultanen Überwachung von Gleit- und Wälzlagern
Albers, A.; Dickerhof, M.
2009. DMK 2009 - Dresdner Maschinenelemente Kolloquium, 24. und 25. November 2009, TUDpress
Academic Engineering Design Education In A Realistic Environment
Albers, A.; Sauter, C.; Maier, T.; Geier, M.; Ottnad, J.
2009. 2009 Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME 2009, August 30 - September 2, 2009, San Diego, CA; 1 CD-Rom, The American Society of Mechanical Engineers (ASME)
Modeling, Sensitivity Analysis and Optimization of Mechanisms made of Micro-Molded Components
Albers, A.; Leslabay, P.
2009. 2009 Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME 2009, August 30 - September 2, 2009, San Diego, CA; 1 CD-Rom, The American Society of Mechanical Engineers (ASME)
Design and Optimization of Mechanisms made of Micro-molded Components
Albers, A.; Leslabay, P.
2009. Proceedings of the World Congress on Engineering 2009, WCE 2009, July 1 - 3, 2009, London, U.K., IAENG
Validierung von Mikrogetrieben - Erhöhte Korrelation zwischen Simulation und Prüfstandsversuch
Albers, A.; Börsting, P.; Enkler, H.-G.; Leslabay, P.
2009. Proceedings / Mikrosystemtechnik-Kongress 2009, Berlin, 12. - 14. Oktober 2009, 1 CD-Rom, VDE Verlag
Integration von Simulation und Test am Beispiel Vehicle-in-the-loop auf dem Rollenprüfstand und im Fahrversuch = Integration of Simulation and Test using Vehicle-in-loop technology at the roller test bench and in the road test
Albers, A.; Düser, T.
2009. Präsentation / 3. Internationales Symposium für Entwicklungsmethodik "Herausforderungen im Spannungsfeld neuer Antriebskonzepte", Wiesbaden, 10./11. November 2009, 52–63, AVL Deutschland
Conceptual Design by means of Genetic Algorithms
Albers, A.; Enkler, H.-G.; Frietsch, M.; Sauter, C.
2009. Presentation / The 20th DAAAM International Symposium "Intelligent Manufacturing & Automation: Theory, Practice & Education", 25-28th November 2009, Vienna, Austria
Validierung von Mikrozahnrädern: Erhöhung der Korrelation zwischen Simulation und Versuch
Albers, A.; Börsting, P.; Deigendesch, T.; Enkler, H.-G.; Leslabay, P.
2009. 4. Kolloquium Mikroproduktion - Fachbeiträge der vier SFB der Mikrotechnik, Bremen, 28.-29. Oktober 2009. Hrsg.: F. Vollertsen, Verlag BIAS
Application of Reinforcement Learning for a 2-DOF Robot Arm Control
Albers, A.; Yan, W.; Frietsch, M.
2009. Presentation / The 20th DAAAM International Symposium "Intelligent Manufacturing & Automation: Theory, Practice & Education", 25-28th November 2009, Vienna, Austria
Integrated Structural and Controller Optimization for Lightweight Robot Design
Albers, A.; Ottnad, J.
2009. Humanoids09 - 9th IEEE-RAS International Conference on Humanoid Robots, Paris, France, December 7-10, 2009, 93–98, Institute of Electrical and Electronics Engineers (IEEE)
Ein neuer Ansatz zur Erhöhung der Robustheit von Mikrobauteilen mit Hilfe adaptierter Formoptimierungsalgorithmen
Albers, A.; Enkler, H.-G.
2009. 4. Kolloquium Mikroproduktion - Fachbeiträge der vier SFB der Mikrotechnik, Bremen, 28.-29. Oktober 2009. Hrsg.: F. Vollertsen, Verlag BIAS
Operation Mode Based Measurement Process for NVH Phenomena on a Roller Test Bench
Albers, A.; Düser, T.; Robens, G.; Ott, S.
2009. Proceedings of Inter-Noise 2009 - 38th International Congress and Exposition on Noise Control Engineering, Ottawa, Canada, August 23-26, 2009; 1 CD-Rom, Institute of Noise Control Engineering of the USA (INCE-USA)
Knowledge Management in Research and Education for Product Development
Albers, A.; Sauter, C.; Maier, T.
2009. Fifth Conference Professional Knowledge Management, Experiences and Visions, WM 2009, March 25 - 27, 2009, Solothurn, Switzerland. Ed.: K. Hinkelmann, 492–497, Ges. für Informatik
Durchgängige Validierungsumgebung zum Testen von Mensch-Maschine-Schnittstellen für neuartige Fahrerassistenzsysteme
Albers, A.; Schröter, J.; Düser, T.
2009. Erprobung und Simulation in der Fahrzeugentwicklung - Mess- und Versuchstechnik.14. VDI-Fachtagung, 24. und 25. Juni 2009, Würzburg; 1 CD-Rom, Würzburg
Design Parameter Investigation in Customer-oriented Drive Train Development Using Human Sensation Modeling Tools
Albers, A.; Lerspalungsanti, S.; Düser, T.; Ott, S.
2009. ASME IDETC 2009 - 11th International Conference on Advanced Vehicle and Tire Technologies (AVTT), August 30-September 2, 2009, San Diego, CA, USA, 977–985, The American Society of Mechanical Engineers (ASME). doi:10.1115/DETC2009-86363
Vermittlung von Schlüsselqualifikationen am Beispiel des Karlsruher Lehrmodells für Produktentwicklung (KaLeP)
Albers, A.; Burkardt, N.; Deigendesch, T.
2009. Schlüsselqualifikationen für Studium, Beruf und Gesellschaft: Technische Universitäten im Kontext der Kompetenzdiskussion. Hrsg.: C.Y. Robertson-von Trotha, 511–520, Universitätsverlag Karlsruhe
Influence of argon gas pressure and target power on magnetron plasma parameters
Nguyen, T.; Ulrich, S.; Bsul, J.; Beauvais, S.; Burger, W.; Albers, A.; Stüber, M.; Ye, J.
2009. Diamond and Related Materials, 18, 995–98. doi:10.1016/j.diamond.2009.01.015
A Method for Defining a Product Architecture Early in Product Development Using the Contact and Channel Model
Albers, A.; Sedchaicarn, K.; Sauter, C.; Burger, W.
2009. Proceedings of the ICED’09 - International Conference on Engineering Design, 24.-27. August 2009, Stanford University, Stanford, CA, USA, Stanford
Development of complex mechatronic systems - Computer aided conceptual design
Albers, A.; Burger, W.; Enkler, H.-G.; Frietsch, M.; Sauter, C.
2009. Proceedings of the ICCME’09 - International Conference on Collaborative Mechatronic Engineering, May 25-26, 2009, Salzburg, Austria, 12 Folien, Salzburg
Domänenübergreifende Entwicklungsprozesse – Ein modellbasierter Ansatz vom Anwendungsfall bis zur Optimierung
Albers, A.; Düser, T.; Enkler, H.-G.; Ottnad, J.
2009. 2. Grazer Symposium Virtuelles Fahrzeug, 27.-28. April 2009, Graz, Graz
Structural and Controller Optimization in Dynamic Mechatronic Systems
Albers, A.; Ottnad, J.; Häußler, P.
2009. Emerging Technologies, Robotics and Control Systems. Ed.: S. Pennacchio, INTERNATIONALSAR Publishing Direction
A new computer-aided approach to support designers in conceptual design of complex mechatronic products
Albers, A.; Enkler, H.-G.; Frietsch, M.; Sauter, C.
2009. Design has never been this cool : ICED 09, the 17th International Conference on Engineering Design - Stanford University, Stanford, California, USA, 24 - 27 August 2009. Ed.: M. Norell Bergendahl. Vol.: 4, 25–34, The Design Society
Methode zur Modellbasierten Überwachung von komplexen mechatronischen Systemen
Albers, A.; Seifermann, A.
2009. Vortrag beim SIMPEP - Kongress für Simulation im Produktentstehungsprozess, 18./19. Juni 2009, Veitshöchheim, Germany, Veitshöchheim
A novel approach for computer aided configuration of mechatronic systems
Albers, A.; Enkler, H.-G.; Frietsch, M.; Sauter, C.
2009. Tagungsband / ASIM-Treffen STS/GMMS 2009; DASS 2009. Hrsg.: G. Elst, 169–174, Fraunhofer IRB Verlag
Computer aided configuration of mechatronic systems – a new approach to support conceptual design activities in product development
Albers, A.; Burger, W.; Enkler, H.-G.; Frietsch, M.; Sauter, C.
2009. ProSTEP iViP Symposium 2009 - Mechatronic Development-an Interdisciplinary Challenge, 12. und 13. Mai 2009, Berlin, Germany, 23 Folien, Berlin
Erfassung betriebszustandsabhängiger schwingungskomfortrelevanter Phänomene von Fahrzeugen
Albers, A.; Düser, T.; Robens, G.; Ott, S.
2009. Automotive and Engine Technology / 9. Internationales Stuttgarter Symposium; Kongressdokument, Vieweg Verlag
3-D topology optimisation connected with fibre alignment for composite structures manufactured by tailored fibre placement
Albers, A.; Majic, N.; Ottnad, J.; Spickenheuer, A.; Heinrich, G.
2009. Proceedings of the WCSMO-8 - 8th World Congress on Structural and Multidisciplinary Optimization, 1.-5. Juni 2009, Lisboa, Portugal, Lisboa
An Approach to increase Robustness of Molded Micro Components subject to high Scatter using Adapted Shape Optimization
Albers, A.; Enkler, H.-G.
2009. Proceedings of the WCSMO-8 - 8th World Congress on Structural and Multidisciplinary Optimization, 1.-5. Juni 2009, Lisboa, Portugal, Lisboa
Modelling Sensitivity Analysis and Optimization of Mechanisms made of Micro Molded Component
Albers, A.; Leslabay, P.
2009. Proceedings of the WCSMO-8 - 8th World Congress on Structural and Multidisciplinary Optimization, 1.-5. Juni 2009, Lisboa, Portugal, Lisboa
New Concept for Wrist Design of the Humanoid Robot ARMAR
Albers, A.; Ottnad, J.; Sander, C.
2009. Advances in Robotics Research : Theory, Implementation, Application. German Workshop on Robotics (GWR), Braunschweig, Germany, June 9 - 10, 2009. Ed.: T. Kröger, 169–178, Springer Verlag
Die Herausforderung komplexer Simulationsprozesse - Ein methodischer Ansatz mit dem generalisierten Contact and Channel Model
Albers, A.; Enkler, H.-G.; Ottnad, J.
2009. Entwurf mechatronischer Systeme - 6. Paderborner Workshop. Hrsg.: J. Gausemeier, Heinz-Nixdorf-Inst
Optimierungsbasierte Entwicklung von Prüfstandskomponenten unter dynamischen Aspekten
Albers, A.; Hesenauer, B.; Maier, T.; Zingel, C.
2009. Vortrag beim SIMPEP - Kongress für Simulation im Produktentstehungsprozess, 18./19. Juni 2009, Veitshöchheim, Germany, Veitshöchheim
Rechnergestützte Formoptimierung von urgeformten Mikrobauteilen
Albers, A.; Enkler, H.-G.
2009. Proceedings / Mikrosystemtechnik-Kongress 2009, 12. - 14. Oktober 2009, Berlin; 1 CD-Rom, VDE Verlag
Challenges in Simulating Molded Micro Components and Systems
Albers, A.; Enkler, H.-G.; Leslaby, P.
2009. Proceedings of the NAFEMS World Congress 2009 - The International Congress on Simulation Technology for the Engineering Analysis Community, June 16th - 19th, 2009, Crete, Greece, Crete
Topology Optimization of Dynamically Loaded Structures with Respect to Issues of Noise, Vibration and Harshness (NVH)
Pedersen, C.; Hessenauer, B.; Sigmund, O.; Albers, A.
2009. Proceedings of the NAFEMS World Congress 2009 - The International Congress on Simulation Technology for the Engineering Analysis Community, June 16th - 19th, 2009, Crete, Greece, Crete
Integrated Topology and Controller Parameter Optimization in Dynamic Systems
Albers, A.; Ottnad, J.; Häußler, P.
2009. Proceedings of the NAFEMS World Congress 2009 - The International Congress on Simulation Technology for the Engineering Analysis Community, June 16th - 19th, 2009, Crete, Greece, Crete
Unlubricated Clutch System based on the Function Relevant Friction Pairing Advanced Non-Oxide Ceramic vs. Steel
Albers, A.; Ott, S.; Mitariu, M.
2009. 33nd International Conference & Exposition on Advanced Ceramics and Composites, 18.-23. Januar 2009, Daytona Beach, Florida, USA, Daytona Beach
Structural Optimization of Multiple Parts in Mechatronic Systems
Albers, A.; Ottnad, J.; Minx, J.; Häußler, P.
2009. Recent advances in Control Systems Robotics and Automation - Volume 1. Ed.: S. Pennacchio, INTERNATIONALSAR Publishing Direction
Contact and Channel Modelling to support the design of technical systems
Albers, A.; Braun, A.; Enkler, H.-G.; Wynn, D.; Clarkson, P. J.
2009. Proceedings of the ICED’09 - International Conference on Engineering Design, 24.-27. August 2009, Stanford University, Stanford, CA, USA, Stanford
Structural and Controller Optimization in Dynamic Mechatronic Systems
Albers, A.; Ottnad, J.; Häußer, P.
2009. International Journal of Factory Automation, Robotics and Soft Computing
Simulation and Optimization of Mechanisms made of Micro-molded Components
Albers, A.; Leslaby, P.
2009. Proceedings of the ICAME 2009 - International Conference on Automotive and Mechanical Engineering, July 29-31, 2009, Oslo, Norway, Oslo
Dealing with Uncertainty of Micro Gears - Integration of Dimensional Measurement, Virtual and Physical Testing
Albers, A.; Fleischer, J.; Enkler, H.-G.; Leslabay, P.; Schlipf, M.
2009. ASME /IMECE - International Mechanical Engineering Congress and Exposition, Boston, Massachusetts, USA, October 31 - November 6, 2008, The American Society of Mechanical Engineers (ASME)
FE Thermal and Mechanical Analysis of a Ceramic Clutch
Czél, B.; Váradi, K.; Albers, A.; Mitariu, M.
2009. Tribology International, 42 (5), 714–723
2008
Entwicklung einer geschlossenen Auslegungsmethodik zur Modellierung und Optimierung des mechanischen Gesamtsystemverhaltens von Parallelkinematiken
Fleischer, J.; Albers, A.; Minx, J.; Broos, A.; Tröndle, M.
2008. Fertigungsmaschinen mit Parallelkinematiken. Hrsg.: Uwe Heisel, 97–118, Shaker
Prediction of Functionality and Long-term Performance of Microgears
Albers, A.; Lanza, G.; Fleischer, J.; Deigendesch, T.; Enkler, H. G.; Leslabay, P.; Oerding, J.; Viering, B.; Schlipf, M.
2008. Proceedings of the 10th anniversary international conference of the European Society for Precision Engineering and Nanotechnology : May 18th - May 22nd 2008, Zürich, Switzerland. Ed.: H. Van Brussel, 270–274, European Society for Precision Engineering and Nanotechnology (euspen)
Potentiale von Hybridantrieben in mobilen Arbeitsmaschinen. Alternative Antriebssysteme
Albers, A.; Ott, S.; Seifermann, A.
2008. Wissensportal.de. Wissensportal Bau- und Baustoffmaschinen https://www.baumaschine.de/baumaschine/archiv.html, (2)
A Method to Examine Links between Subjective and Objective Evaluations of Steering Torque Utilising a Model-Based Approach
Zschoeke, A. K.; Albers, A.
2008. 32nd FISITA World Automotive Congress 2008; Munich; Germany; 14 September 2008 through 19 September 2008, 417–426
Humanoid Robots - Connecting Humans and Technology
Albers, A.; Christian, S.; Frietsch, M.; Ottnad, J.
2008. International Conference Technologies of Globalization, Darmstadt, 30. - 31. October, 2008, TU Darmstadt
Multi-objective System Optimization of Engine Crankshafts Using an Integration Approach
Albers, A.; León-Rovira, N.; Aguayo-Tellez, H. A.; Maier, T.
2008. New developments in simulation methods and software for engineering applications: presented at 2008 ASME International Mechanical Engineering Congress and Exposition, October 31 - November 6, 2008, Boston, Massachusetts, USA, 101–109, The American Society of Mechanical Engineers (ASME). doi:10.1115/IMECE2008-67447
Elastische Elemente, Federn
Albers, A.
2008. Konstruktionselemente des Maschinenbaus 1. Grundlagen der Berechnung und Gestaltung von Maschinenelementen. Ed.: W. Steinhilper, 199–267, Springer Verlag
Handling Compexity - A Methodological Approach Comprising Process and Knowledge Management
Albers, A.; Deigendesch, T.; Meboldt, M.
2008. Tools and Methods of Competitive Engineering, Vol 1, Proceedings of the seventh international Symposium TMCE. Ed.: I. Horvath, University of Technology
Handling Complexity - A Methodological Approach Comprising Process and Knowledge Management
Albers, A.; Deigendesch, T.; Meboldt, M.
2008. Proceedings of the TMCE 2014, Budapest, HU, May 19-23, 2014
Anwendung der Simulationstechnik zur Überwachung der Fahrzeuglängsdynamik
Albers, A.; Seifermann, A.; Wang, J.; Ott, S.; Düser, T.
2008. 14. Internationaler Kongress und Fachausstellung SIMVEC. Berechnung und Simulation im Fahrzeugbau, Baden-Baden, 26.-27. November 2008., 447–464, VDI Verlag
Interdisciplinary Development Based on a Comprehensive Process Model
Albers, A.; Sauter, C.; Meboldt, M.
2008. Prospects in mechanical engineering : 53. Internationales Wissenschaftliches Kolloquium (IWK), Ilmenau, 8 - 12 September 2008. Ed.: P. Scharff, Verl. ISLE
A Systematic Approach to Support Drive Train Design Using Tools for Human Comfort Evaluation and Customer Classification
Albers, A.; Lerspalungsanti, S.; Düser, T.; Ott, S.; Wang, J.
2008. Proceedings of the ASME Design Engineering Technical Conference and Computers and Information in Engineering Conference, IDETC/CIE2008; Brooklyn, NY; United States; 3 August 2008 through 6 August 2008, 651–662, The American Society of Mechanical Engineers (ASME). doi:10.1115/DETC2008-49082
Enabling Key Competencies by Educational Project Work Exemplified by Teamwork and Cooperation
Albers, A.; Burkardt, N.; Deigendesch, T.; Meboldt, M.
2008. 10th International Conference on Engineering and Product Design Education (EPDE), 4 and 5 September 2008, Barcelona, Spain, 6 S
VCDM Virtual Clutch Development Model - Virtual Prototyping Approach Clarifies Clutch Related Phenomena
Albers, A.; Behrendt, M.; Ott, S.; Sjästrand, M.; Mahlin, B.
2008. Getriebe in Fahrzeugen 2008 (VDI Transmission in vehicles) : VDI-Tagung Friedrichshafen, 17. - 18. Juni 2008, 725–737, VDI Verlag
Development of Quality Assurance for Micro Gear Wheels by Dimensional Metrology and Functional Testing
Albers, A.; Becke, C.; Burkardt, N.
2008. 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009, Zurich, Switzerland, 18. - 22. May, 2008, 261–265, European Society for Precision Engineering and Nanotechnology (euspen)
Weiterentwicklung von Dünnschichtsensoren
Albers, A.; Beauvais; Bsul; Burger
2008. Sensoren und Messsysteme 2008, 14. GMA/ITG-Fachtagung, Ludwigsburg, 11. - 12. März, 2008, VDI Fachmedien
Kupplungssysteme mit modernen Methoden entwickeln
Albers, A.
2008. Konstruktion, (7-8), 3
Systematische Modellbildung und Raum für individuelles Vorgehen mit C&CM in einem Industrieprojekt
Albers, A.; Matthiesen, S.; Meboldt, M.; Alink, T.; Thau, S.
2008. KT2008, 6. Gemeinsames Kolloquium Konstruktionstechnik 2008
Entwicklung einer geschlossenen Auslegungsmethodik zur Modellierung und Optimierung des mechanischen Gesamtsystemverhaltens von Parallelkinematiken
Fleischer, J.; Albers, A.; Minx, J.; Broos, A.; Tröndle, M.
2008. Fertigungsmaschinen mit Parallelkinematik - Forschung in Deutschland. Hrsg.: U. Heisel, 97–117, Shaker Verlag
The Application of Design Process Patterns exemplified by the C&CM Sequence Model
Albers, A.; Deigendesch, T.; Alink, T.
2008. ICPM 2008 - Portrait / Faculty of Mechanical Engineering. Hrsg.: P. Scharff, 1 CD-Rom, Techn. Univ
Validation of Micromechanical Systems
Albers, A.; Burkardt, N.; Deigendesch, T.; Ellmer, C.; Hauser, S.
2008. Microsystem Technologies, 14 (9-11), 1481–1485
X-in-the-loop als integrierte Entwicklungsumgebung von komplexen Antriebsystemen
Albers, A.; Düser, T.; Ott, S.
2008. 8. Tagung Hardware-in-the-loop-Simulation, 16./17. September 2008, Kassel, Germany, Kassel
Influence of Argon Gas Pressure and Target Power on Magnetron Plasma Parameters
Albers, A.; Bsul, J.; Nguyen, T.; Beauvais, S.; Burger, W.; Ulrich, S.; Stüber, M.; Ye, J.
2008. Proceedings of the Diamond 2008 - 19th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Sep. 7-11, 2008, Sitges, Spain, Sitges
KoPira-Vorstellung. Piraterie-Risiko, Strategien und Maßnahmen
Albers, A.; Marxen, L.
2008. Vortrag / Innovationen gegen Produktpiraterie, 22. Januar 2008, Haus der Deutschen Wirtschaft, Berlin, 16 Folien, Berlin
Kenngrößen und Belastungsgrenzen von nasslaufenden Lamellenkupplungen unter Dauerschlupfbeanspruchung
Albers, A.; Bernhardt, J.
2008. FVA Informationstagung, 2./3. Dezember 2008, Würzburg, Germany, Würzburg
Zwischenbericht FVA Forschungsvorhaben 442 II: Analyse des Einflusses werkstofftechnischer Parameter auf das Reibschwingverhalten von organischen Fritkionswerkstoffen
Albers, A.; Späth, C.; Ott, S.
2008. FVA Informationstagung, 2./3. Dezember 2008, Würzburg, Germany, Würzburg
Versuch von Anwendung der Simulationstechnik in Überwachung der Fahrzeuglängsdynamik
Albers, A.; Seifermann, A.; Wang, J.; Ott, S.; Düser, T.
2008. 14. Internationaler Kongress und Fachausstellung SIMVEC - Berechnung und Simulation im Fahrzeugbau 2008, 447–464, VDI Verlag
Effiziente Leistungssteigerung im Antriebsstrang durch innovative Reibkupplungen auf Basis ingenieurkeramischer Friktionswerkstoffe
Albers, A.; Mitariu, M.; Ott, S.
2008. 49. Tribologie-Fachtagung / Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen, Gesellschaft für Tribologie e.V. (GfT)
Performance and Potential of dry running motor vehicle clutch systems with advanced ceramics as friction materials
Albers, A.; Ott, S.; Mitariu, M.
2008. 2008 STLE/ASME International Joint Tribology Conference, October 20-22, 2008, Miami, Florida, Miami
An Approach for the Modularization of a Product Architecture in Redesign Processes of Complex Systems
Albers, A.; Sedchaicharn, K.; Sauter, C.; Burger, W.
2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 20th International Conference on Design Theory and Methodology (DTM), The American Society of Mechanical Engineers (ASME)
Support of system analyses and improvement in industrial design trough the C&CM
Albers, A.; Alink, T.; Matthiesen, S.; Thau, S.
2008. Proceedings of the DESIGN 2008 - 10th International Design Conference, 19 - 23 May, 2008, Dubrovnik, Croatia, 245–326, Dubrovnik
Innovative trockenlaufende Reibkupplungen auf Basis ingenieurkeramischer Friktionswerkstoffe
Albers, A.; Ott, S.; Mitariu, M.
2008. Tribologie und Schmierungstechnik - Organ der Gesellschaft für Tribologie und Organ der Österreichischen Tribologischen Gesellschaft, 55 (6)
Humanoid Robots - Connecting Humans and Technology
Albers, A.; Sauter, C.; Frietsch, M.; Ottnad, C.
2008. Proceedings / International Conference "Technologies of globalization", october 30-31, 2008. Ed.: R. Anderl, Techn. Univ
Condition-Monitoring Based on Structure-borne Ultrasound Analysis
Albers, A.; Dickerhof, M.; Burger, W.
2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 32nd Annual Mechanisms and Robotics Conference (MR), The American Society of Mechanical Engineers (ASME)
Prediction of Functionality and Life Cycle Performance of Microgears
Albers, A.; Lanza, G.; Fleischer, J.; Oerding, J.; Deigendesch, T.; Enkler, H.-G.; Leslabay, P.; Schlipf, M.
2008. Proceedings of the 10th anniversary international conference of the European Society for Precision Engineering and Nanotechnology. Ed.: H. Van Brussel, European Society for Precision Engineering and Nanotechnology (euspen)
Enabling Key Competencies by Educational Project Work Exemplified by Teamwork and Cooperation
Albers, A.; Burkardt, N.; Deigendesch, T.; Meboldt, M.
2008. 10th International Conference on Engineering and Product Design Education (EPDE) - "New Perspectives in Design Education", 4 and 5 September 2008, Barcelona, Spain
Werkzeug zur automatischen Parametrierung von künstlichen neuronalen Netzen zur modellbasierten Prüfstandsüberwachung auf Basis von MATLAB
Albers, A.; Seifermann, A.
2008. Vortrag beim Technologie-Seminar “Multidisziplinäre Forschung und Lehre mit der MathWorks Produktfamilie“, Karlsruhe, Germany, Universität Karlsruhe (TH)
Überwachung von Gleitkontakten mittels Ultraschallemissionsanalyse
Albers, A.; Dickerhof, M.
2008. Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, 51 (10), 69
Anforderungen an eine kostengerechte Produktentwicklung
Albers, A.; Alink, T.; Oerding, J.
2008. Vortrag beim 23. Deutscher Controlling Congress (DCC), 21. Mai 2008, Dortmund, Germany, Dortmund
A systematic approach to supporting drive-train assembly design using new customer comfort objectifying tools
Albers, A.; Lerspalungsanti, S.; Düser, T.; Ott, S.; Wang, J.
2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 10th International Conference on Advanced Vehicle and Tire Technologies (AVTT), The American Society of Mechanical Engineers (ASME)
Friction and wear of highly loaded mixed lubrication contacts influenced by superposed sliding directions and intermittent surface pressure performed on a novel model bench
Albers, A.; Behrendt M.; Ott, S.
2008. Proceedings of the International Symposium on Friction, Wear and Wear Protection, 9 - 11 Apr 2008, Aachen, Germany, Aachen
Advancement of Thin Film Layer Sensors for Pressure and Temperature Measurements in Highly Loaded Tribological Contacts under Mixed Lubrication
Albers, A.; Beauvais, S.; Bsul, J.; Burger, W.
2008. 16th International Colloquium Tribology "Automotive and Industrial Lubrication", 2008, Stuttgart, Deutschland, Stuttgart
Structural Optimization of Multiple Parts in Mechatronic Systems
Albers, A.; Ottnad, J.; Minx, J.; Häußler, P.
2008. International Journal of Factory Automation, Robotics and Soft Computing, (4)
Integrierte Topologie und Faser Optimierung für 3D-Verbundbauteile
Albers, A.; Otttnad, J.; Minx, J.; Häußler, P.
2008. Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, 51 (10), 10–11
An Approach for the Modularization of a Product Architecture in Redesign Processes of Complex Systems
Albers, A.; Sedchaicharn, K.; Sauter, C.; Burger, W.
2008. Mechatronik Tage 2008 - Internationale Konferenz und Fachmesse, 15. - 16. September 2008, Karlsruhe, Germany, Universität Karlsruhe (TH)
Humanoide Roboter weltweit und in Karlsruhe
Albers, A.; Sauter, C.; Ottnad, J.; Frietsch, M.; Sedchaicharn, K.
2008. Mechatronik Tage 2008 - Internationale Konferenz und Fachmesse, 15. - 16. September 2008, Karlsruhe, Germany, Universität Karlsruhe (TH)
Development of a New Wrist for the Next Generation of the Humanoid Robot ARMAR
Albers, A.; Ottnad, J.; Sander, C.
2008. Humanoids 2008 - 8th IEEE-RAS International Conference on Humanoids Robots, December 1 to 3, 2008, Daejeon, Korea, Daejeon
System Based Topology Optimization as Development Tools for Lightweight Components in Humanoid Robots
Albers, A.; Ottnad, J.
2008. Humanoids 2008 - 8th IEEE-RAS International Conference on Humanoids Robots, December 1 to 3, 2008, Daejeon, Korea, Daejeon
Integrierte Validierungsumgebung für energieeffiziente Fahrerassistenzsysteme am Rollenprüfstand
Albers, A.; Düser, T.
2008. IPG Technology Conference 2008, September 23-24, 2008, Ettlingen, Germany
The Adoption of Open Innovation the Automotive Industry
Albers, A.; Ili, S.
2008. 2008 ISPIM Conference - Open Innovation: Creating Products and Services through Collaboration, 15-18 June 2008, Tours, France, Tours
Systems development of lubricated multi-disc clutch systems with advanced ceramics
Albers, A.; Ott, S.; Bernhardt, J.
2008. 2008 STLE/ASME International Joint Tribology Conference, October 20-22, 2008, Miami, Florida, Miami
Experimentelle Untersuchung geschmierter Friktionssysteme mit ingenieurkeramischen Werkstoffen am Beispiel einer nasslaufenden Lamellenkupplung
Albers, A.; Ott, S.; Bernhardt, J.
2008. 49. Tribologie-Fachtagung / Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen, Göttingen, 22. - 24. September 2008, Gesellschaft für Tribologie e.V. (GfT)
Support of engineering design activity through the contact and channel model - the importance of a continous and systematic model building
Albers, A.; Alink, T.
2008. ICPM 2008 - Portrait / Faculty of Mechanical Engineering. Hrsg.: P. Scharff, 1 CD-Rom, Techn. Univ
Eine integrierte Entwicklungsumgebung für Antriebsstrangsysteme
Albers, A.; Geier, M.; Behrendt, M.; Ott, S.
2008. 7. Internationalen CTI Symposium Innovative Fahrzeug-Getriebe, 01. bis 05. Dezember 2008, Berlin, Germany, Berlin
Topology optimization of multiple structural parts in dynamic mechatronic systems
Albers, A.; Ottnad, J.; Häußler, P.; Minx, J.
2008. Mechatronics 2008 - The 11th Mechatronics Forum Biennial International Conference, June 23-25, 2008, Limerick, Ireland, Limerick
Investigations on highly and complex loaded friction contacts under mixed conditions based on a novel model bench
Albers, A.; Behrendt, M.; Ott, S.
2008. Lubricants, materials and lubrication engineering - 16th International Colloquium Tribology. Ed.: W. J. Bartz, Technische Akademie Esslingen (TAE)
Integrated Topology and Fibre Optimization for 3-Dimesnional Composits
Albers, A.; Ottnad, J.; Weiler, H.
2008. Proceedings / 2008 ASME International Mechanical Engineering Congress & Exposition - "Engineering a Better World", October 31 - November 6, 2008, Boston, Massachussets, USA, Boston
System Simulation and Structural Optimization
Albers, A.; Ottnad, J.; Minx, J.; Häußler, P.
2008. International Journal of Factory Automation, Robotics and Soft Computing, (2)
Electrolytic Reactors for High Pressure Hydrogen Generation. Design and Simulation
Albers, A.; Lauretta, R.; Leslabay, P.
2008. Proceedings / 2008 ASME International Mechanical Engineering Congress & Exposition - "Engineering a Better World", October 31 - November 6, 2008, Boston, Massachussets, USA, Boston
Simulation of Molded Micro Components and Systems with regard to the Grain Structure
Albers, A.; Enkler, H.-G.; Leslabay, P.
2008. ASME /IMECE 2008 - New Developments in Simulation Methods and Software for Engineering Applications, 31.10. - 06.11.2008, Boston, Massachusetts, USA, Boston
A New Test-Bench for Study of Plain Bearings Under Mixed Lubrication
Albers, A.; Beauvais, S.; Bsul, J.; Burger, W.
2008. DETC 2008 - Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, The American Society of Mechanical Engineers (ASME)
Upper body design of a full-size humanoid robot
Albers, A.; Burger, W.; Sauter, C.; Ottnad, J.; Sedchaicharn, K.; Frietsch, M.
2008. Proceedings of the 5th EUROPE-ASIA Congres on MECHATRONICS 2008, May 21st-23rd, 2008, Le Grand-Bornand, France, Le Grand-Bornand
Concept for environment simulation at the roller test bench
Albers, A.; Düser, T.; Seifermann, A.
2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 10th International Conference on Advanced Vehicle and Tire Technologies (AVTT), The American Society of Mechanical Engineers (ASME)
A Contribution to the Simulation of Molded Micro Components and Systems
Albers, A.; Enkler, H.-G.; Leslabay, P.
2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 2nd International Conference on Micro- and Nanosystems (MNS), The American Society of Mechanical Engineers (ASME)
System Simulation and Structural Optimization
Albers, A.; Ottnad, J.; Häußler, P.; Minx, J.
2008. Emerging Technologies, Robotics and Control Systems. Ed.: S. Pennacchio, INTERNATIONALSAR Publishing Direction
Systems development of lubricated multi-disc clutch systems with advanced ceramics
Albers, A.; Ott, A.; Bernhardt, J.
2008. Proceedings of NORDTRIB 2008 - 13th Nordic Symposium on Tribology. Ed.: J. Kleemola, 1 CD-Rom, Tampere University of Technology
Vehicle start-up simulation on drive train test bench and subjective comfort evaluation of virtual drive train by means of new driver modelling tools based on artificial neural networks
Albers, A.; Lerspalungsanti, S.; Ott, S.; Düser, T.
2008. Congress proceedings / FISITA World Automotive Congress, 14 - 19 September 2008, Munich, Germany, Springer Automotive Media
Application of Artificial Neural Networks (ANN) for Monitoring of Vehicle Longitudinal Dynamic Performance
Albers, A.; Wang, J.; Ott, S.; Düser, T.; Lerspalungsanti, S.
2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 10th International Conference on Advanced Vehicle and Tire Technologies (AVTT), The American Society of Mechanical Engineers (ASME)
Model-Based System Monitor Using Artificial Neural Networks (ANN)
Albers, A.; Wang, J.; Ott, S.; Düser, T.; Seifermann, A.
2008. Proceedings / 2008 ASME International Mechanical Engineering Congress & Exposition - "Engineering a Better World", October 31 -November 6, 2008, Boston, Massachussets, USA, Boston
The Relation of Function and Requirements for an Improved Detection of Component Linkages
Albers, A.; Eckert, C. M.; Boersting, P.; Keller, R.; Alink, T.; Clarkson, P. J.
2008. Design 2008 - 10th International Design Conference, 19-22 May 2008, Dubrovnik, Croatia, Dubrovnik
Support of design engineering activity through C&CM - Temporal decomposition of design problems
Albers, A.; Alink, T.; Thau, S.; Matthiesen, S.
2008. 7th International Symposium on Tools and Methods of Competitive Engineering (TMCE), Izmir, Turkey, April 21 - 25, 2008. Ed.: I. Horváth, Delft University of Technology (TU Delft)
Topology optimization of multiple parts in controlled dynamic systems
Albers, A.; Ottnad, J.; Häußler, P.; Minx, J.
2008. DETC 2008 - Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, The American Society of Mechanical Engineers (ASME)
Information Integration and Cooperation in Product Development by Utilization of Wikis
Albers, A.; Deigendesch, T.; Meboldt, M.
2008. TCM 2008 / Tools and methods of competitive engineering - proceedings of the 7th International Symposium on Tools and Methods of Competitive Engineering. Ed.: I. Horváth, Delft University of Technology (TU Delft)
Piracy Risk and Measure Analysis
Albers, A.; Marxen, L.; Meboldt, M.; Oerding, T.; Schaeffler, T.
2008. 7. Internationales Heinz Nixdorf Symposium, 20. und 21. Februar 2008, Paderborn, Germany, 12 S., Paderborn
Topology Optimization of Flexible Bodies in Controlled Mechanical Systems
Albers, A.; Ottnad, J.; Häussler, P.; Minx, J.
2008. International Journal of Factory Automation, Robotics and Soft Computing, (1)
Dry running clutch system with advanced ceramics for automotive applications
Albers, A.; Ott, S.; Mitariu, M.
2008. Proceedings of NORDTRIB 2008 - 13th Nordic Symposium on Tribology. Ed.: J. Kleemola, 1 CD-Rom, Tampere University of Technology
Topology and Controller Parameter Optimization in Dynamic Mechatronic Systems
Albers, A.; Ottnad, J.; Häußler, P.; Minx, J.
2008. PAPERS / 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10 - 12 Sep 2008, Victoria, British Columbia, Canada; 1 DVD-Rom, American Institute of Aeronautics and Astronautics
A Modularization Method in the early phase of product development
Albers, A.; Ottnad, J.; Häußler, P.; Minx, J.
2008. Design 2008 - 10th International Design Conference, 19-22 May 2008, Dubrovnik, Croatia, Dubrovnik
Structural Optimization in Mechatronic Systems
Albers, A.; Ottnad, J.; Häußler, P.
2008. 7. Internationales Heinz Nixdorf Symposium, 20. und 21. Februar 2008, Paderborn, Germany, Paderborn
Advances in Thin Film Layer Sensors for Temperature Measurements in Highly Loaded Tribological Contacts under Mixed Lubrication
Albers, A.; Beauvais, S.; Bsul, J.; Burger, W.
2008. Proceedings of the International Symposium on Friction, Wear and Wear Protection, 9 - 11 Apr 2008, Aachen, Germany, Aachen
Links between subjective and objective evaluations regarding the steering character of automobiles
Albers, A.; Zschocke, A.
2008. International Journal of Automotive Technology, 9 (4), 473–481
An integrated Approach for Validating Micro Mechanical Systems based on Simulation and Test
Albers, A.; Deigendesch, T.; Enkler, H.-G.; Hauser, S.; Leslaby, P.; Oerding, J.
2008. Microsystem Technologies, 14 (12), 1781–1787
Topology Optimization of Flexible Bodies in Controlled Mechanical Systems
Albers, A.; Ottnad, J.; Häußler, P.; Minx, J.
2008. Recent advances in Control Systems Robotics and Automation. Ed.: S. Pennacchio, INTERNATIONALSAR Publishing Direction
Methoden zum Leichtbau in der Entwicklung Humanoider Roboter
Albers, A.; Ottnad, J.; Weiler, H.; Häußler, p.
2008. Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, 60 (3), 67–72
Das FTMV Gütesiegel - Ein Beitrag zur Standortbestimmung und Strategiebildung von Fakultäten
Albers, A.; Enkler, H.-G.
2008. Forschung & Lehre, 15 (7), 456–457
Neuartige Dünnschicht-Sensoren zur Messung von Druck und Temperatur in hoch belasteten Tribokontakten unter Mischreibungsbedingungen
Albers, A.; Bsul, J.; Beauvais, S.; Burger, W.; Nguyen, T.
2008. Sensoren und Messsysteme 2008 - 14. Fachtagung Ludwigsburg, 11. und 12. März 2008, VDI Verlag
Support of design engineering activity - the contact and channel model (C&CM) in the context of problem solving and the role of modelling
Albers, A.; Deigendesch, T.; Alink, T.
2008. Proceedings of the DESIGN 2008 - 10th International Design Conference, 19 - 23 May, 2008, Dubrovnik, Croatia, 97–102, Dubrovnik
On the Simulation of Molded Micro Components and Systems
Albers, A.; Enkler, H.-G.; Leslabay, P.
2008. Microsystem Technologies, 14 (9-11), 1269–1277
Magnetron sputtering of hard Cr-Al-N-O thin films
Stüber, M.; Albers, U.; Leiste, H.; Seemann, K.; Ziebert, C.; Ulrich, S.
2008. Surface and Coatings Technology, 203, 661–65. doi:10.1016/j.surfcoat.2008.04.083
Constitution and mechanical properties of nanocrystalline reactive magnetron sputtered V-Al-C-N hard coatings as a function of the carbon content
Ziebert, C.; Albers, U.; Stüber, M.; Ulrich, S.; Holleck, H.
2008. 11th Internat.Conf.on Plasma Surface Engineering (PSE 2008), Garmisch-Partenkirchen, September 15-19, 2008
Einfluss des CH₄-Anteils im Sputtergas auf die mechanischen Eigenschaften von V-C-Al-N-Schichten hergestellt durch Sputtern von einem segmentierten Target
Ziebert, C.; Albers, U.; Ulrich, S.
2008. 1.Zwischenkolloquium des BMBF Projektes IMAUF ’Innovative Methoden zur Auslegung von Umformwerkzeugen im Fahrzeugbau’, Düsseldorf, 16.Juli 2008
Magnetron sputtering of hard Cr-Al-N-O thin films
Stüber, M.; Albers, U.; Leiste, H.; Seemann, K.; Ziebert, C.; Ulrich, S.
2008. 35th Internat.Conf.on Metallurgical Coatings and Thin Films, San Diego, Calif., April 28 - May 2, 2008
Development and prototyping of a ceramic micro turbine
Bauer, W.; Müller, M.; Knitter, R.; Oerding, J.; Albers, A.; Kotschenreuther, J.; Fleischer, J.
2008. 4th Internat.Conf.and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2008), München, April 21-24, 2008 Proc.on CD-ROM IMAPS, 2008
Methods for the Simulation of Micro Components with respect to the Grain Structure
Albers, A.; Enkler, H.-G.
2008. ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Las Vegas, Nevada, USA, September 4–7, 2007. Vol. 3, 889–896, The American Society of Mechanical Engineers (ASME). doi:10.1115/DETC2007-34778
2007
SPALTEN Matrix - Product Development Process on the Basis of Systems Engineering and Systematic Problem Solving
Meboldt, M.; Albers, A.
2007. 17th CIRP Design Conferenc, The Future of Product Development, 43–52, Springer Verlag
IPEMM - Integrated Product Development Process Management Model, Based on Systems Engineering and Systematic Problem Solving
Albers, A.; Meboldt, M.
2007. ICED 2007, 16th International Conference on Engineering Design, Paris, France, 28.-31.07.2007. Ed.: J.-C. Bocquet (Book of Abstracts). Vol.: DS 42, 611–612, The Design Society
Simulation mechatronischer Systeme an Handgeregelter hybrider Mehrkörpersysteme
Albers, A.; Ottnad, J.; Hauliler, P.
2007. 5. Paderborner Workshop: Entwurf mechatronischer Systeme, Paderborn, 22. - 23. März 2007. Hrsg.: J. Gausemeier, 157–174, Heinz-Nixdorf-Institut
Systemdesign nasslaufender Friktionssystemeam Beispiel einer Lamellenkupplung
Albers, A.; Ott, S.; Brnhardt, J.
2007. Reibung, Schmierung und Verschleiß ; Forschung und praktische Anwendungen ; 48. Tribologie-Fachtagung, Göttingen, 24. - 26. September 2007. Bd.: 2, 51, Gesellschaft für Tribologie e.V. (GfT)
Ganzheitliche Methode zur Optimierung komplexer, hochbeanspruchterFriktionssystemeam Beispiel eines CVT-Umschlinugngstriebes
Albers, A.; Ott, S.; Behrend, M.; Bernhardt, J.
2007. Umschlingungsgetriebe -- Ketten und Riemen -- Konstruktion, Simulation und Anwendung von Komponenten und Systemen, Berlin, 21.-22.06.2007, 397, VDI Verlag
GEARE - Global Engineering Alliance for Researchand Education - a student exchange program to meet the needs of a global world
Albers, A.; Burkardt, N.; Hauser, S.
2007. International Conference on Design Education, the University of New South Wales, Sydney, 9 -12 July, 2007, University of NSW
Dedign of ARMAR III - an new humanoid robot
Albers, A.; Brudniok, S.; Ottnad, J.; Sauter, C.; Sedchaicharn, K.
2007. Proceedings of 16th Int. Workshop on Robotics in Alpe-Adria-Danube Region-RAAD, Ljubljana, 7. - 9. June, 2007
Humanoid Robots - New Developement
Albers, A.; Brudniok, S.; Ottnad, J.; Sauter, C.; Sedchaicharn, K.
2007. Humanoid robots: new developments, I-Tech Education and Publishing, 1–16, Advanced Robotic Systems International: I-Tech. doi:10.5772/46213
Development methodology for coupling systems modeling, experiment, and simulation / Entwicklungsmethodik für Kupplungssysteme Modellbildung, Versuch und Simulation
Albers, A.; Behrendt, M.; Ott, S.
2007. VDI-Berichte Nr. 1987, Kupplungen und Kupplungssysteme in Antrieben, Wiesloch bei Heidelberg, 25. - 26. April, 2007, 3–23, VDI Verlag
Modellbasierte Antriebsstrangentwicklung : Durchgängige Werkzeugkette vom Entwurf bis zur Validierung
Albers, A.; Müller-Glaser, K.; Schyr, C.; Kühl, M.
2007. Automobiltechnische Zeitschrift, 109 (2), 134–139. doi:10.1007/BF03221865
Product Models in design: a combined use of two models to assess change risks
Albers, A.; Clarkson, J.; Eckert, C. M.; Keller, R.; Alink, T.; Pfeiffer, C.
2007. Design for society : knowledge, innovation and sustainability - ICED ’07, Paris
Semantic Wikis in knowledge Management for multidisciplinary product development
Albers, A.; Sauter, C.; Deigendesch, T.; Meboldt, M.
2007. Annals of DAAAM for 2007 & proceedings of the 18th International DAAAM Symposium "Intelligent Manufacturing & Automation. Ed.: Branko Katalinic, DAAAM Internat
Innovative Regelungskonzepte für Humanoide Roboter
Albers, A.; Frietsch, M.
2007. ICMT 2007 - Internationale Konferenz für Mechatronik, 17.-20.09.2007, Karlsruhe, Germany, Universität Karlsruhe (TH)
Contact and thermal analysis of an alumina - steel dry sliding friction pair considering the surface roughness
Albers, A.; Lestyan, Z.; Varadi, K.
2007. Tribology International, 40 (6), 982–994
Wikis as a Cooperation and Communication Platform within Product Development
Albers, A.; Deigendesch, T.; Drammer, M.; Ellmer, C.; Meboldt, M.; Sauter, C.
2007. Design for society : knowledge, innovation and sustainability - ICED ’07, Paris
Integration of Key Competencies into Teaching of Product Development
Albers, A.; Burkardt, N.; Deigendesch, T.
2007. Proceddings of the 3rd International CDIO Conference, 11-14 June 2007, Cambridge, Massachusetts, USA, Cambridge
Ein integrativer Ansatz zur simulations- und versuchsgestützten Validierung mikromechanischer Systeme
Albers, A.; Deigendesch, T.; Enkler, H.-G.; Leslabay, P.; Oerding, J.
2007. Kolloquium Mikroproduktion : Fortschritte, Verfahren, Anwendungen. Hrsg.: O. Kraft, Forschungszentrum Karlsruhe (FZKA)
Zuverlässigkeit elektrischer Steckverbinder
Albers, A.; Dickerhof, M.
2007. ICMT 2007 - Internationale Konferenz für Mechatronik, 17.-20.09.2007, Karlsruhe, Germany, Universität Karlsruhe (TH)
Zustandsüberwachung von Maschinen mit Hilfe der Ultraschall-Körperschallanalyse
Albers, A.; Dickerhof, M.; Burger, W.
2007. DMK 2007 - Dresdner Maschinenelemente Kolloquium, TUDpress
Comparison of Strategies for the Optimization/Innovation of Crankshaft Balance
Albers, A.; Leon, N.; Aguayo, H.; Maier, T.
2007. Trends in Computer Aided Innovation - 2nd IFIP Working Conference on Computer Aided Innovation, October 8-9 2007, Michigan, USA. Ed.: N. León-Rovira, 201–210, Springer US
Shape optimization of parts in dynamic mechanical systems with respect to fatigue
Häussler, P.; Albers, A.
2007. Journal of Engineering Design, 18 (5), 505–523
Methods for Lightweight Design of Mechanical Components in Humanoid Robots
Albers, A.; Ottnad, J.; Weiler, H.; Häussler, P.
2007. 7th IEEE/RAS International Conference on Humanoid Robots (Humanoids 2007), November 29th to December 1st in Pittsburgh, PA, 609–615, Institute of Electrical and Electronics Engineers (IEEE)
Validation of Micro Gear Wheels
Albers, A.; Burkardt, N.; Hauser, S.
2007. Design for society : knowledge, innovation and sustainability - ICED ’07, Paris
Robust Design Processes with CAD based Finite Element Models
Albers, A.; Enkler, H.-G.; Maier, T.; Weiler, H.
2007. Design for society : knowledge, innovation and sustainability - International Conference on Engineering Design - ICED ’07 - Paris, France, 28 - 31 August 2007, 103–104, Paris
Experimentelle und simulative Untersuchung des Systemverhaltens einer Kombination aus unterschiedlichen Friktionspaarungen
Albers, A.; Ott, S.; Karrar, C.
2007. Kupplungen und Kupplungssysteme in Antrieben 2007, 127–150, VDI Verlag
Übertragbarkeit des Systemverhaltens zwischen Prüfkategorie und Probekörpergeometrien
ALbers, A.; Ott, S.; Karrar, C.
2007. Nichtlineare Schwingungen - Reibung und Kontaktmechanik : Tagung Kassel, 13. und 14. November 2007, 61–86, VDI Verlag
Model based method for a sophisticated dimensioning of clutch systems in view of the occurrence of frictional vibration
Albers, A.; Ott, S.; Karrar, C.
2007. Design for society : knowledge, innovation and sustainability - ICED ’07, Paris
Systemdesign nasslaufender Friktionssysteme am Beispiel einer Lamellenkupplung
Albers, A.; Ott, S.; Bernardt, J.
2007. Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen; 48. Tribologie-Fachtagung, 978–3, Gesellschaft für Tribologie e.V. (GfT)
Experimentelle Untersuchungen zum Systemverhalten von Keramik-Keramik Friktionspaarungen in nasslaufenden Friktionssystemen am Beispiel eines CVT-Variators
Albers, A.; Ott, S.; Bernardt, J.
2007. Tribologie und Schmierungstechnik: Organ der Gesellschaft für Tribologie und Organ der Österreichischen Tribologischen Gesellschaft, 54 (5), 31–34
GEARE – Global Engineering Alliance for Researchand Education – a student exchange program to meetthe needs of a global world
Albers, A.; Burkardt, N.; Hauser, S.
2007. Proceedings of the ConnectED International Conference on Design Education, 9 –12 July 2007, Sydney, Australia, 5 S., Sydney
Validation of Micromechanical Systems
Albers, A.; Burkardt, N.; Deigendesch, T.; Ellmer, C.; Hauser, S.
2007. Proceedings / HARMST 2007 - 7th International Workshop on High-Aspect-Ratio Micro-Structure Technology, 7. - 9. Juni 2007, Besancon, Frankreich, Becancon
Ganzheitliche Methode zur Optimierung komplexer, hochbeanspruchter Friktionssysteme am Beispiel eines CVT-Umschlinugngstriebes
Albers, A.; Ott, S.; Behrendt, M.; Bernhardt, J.
2007. Umschlingungsgetriebe : Ketten und Riemen - Konstruktion, Simulation und Anwendung von Komponenten und Systemen, 397–404, VDI Verlag
Design of Modules and Components for Humanoid Robots
Albers, A.; Brudnoik, S.; Ottnad, J.; Sauter, C.; Sedchaicharn, K.
2007. Humanoid Robots - New Developement. Ed.: A. C. de Pina Filho, IN-TECH Education and Publishing
Entwicklungsmethodik für Kupplungssysteme - Modellbildung, Versuch und Simulation
Albers, A.; Behrendt, M.; Ott, S.
2007. Kupplungen und Kupplungssysteme in Antrieben 2007, 3–24, VDI Verlag
Condition monitoring an Windkraftanlagen mit Hilfe der Ultraschall-Körperschallananlyse
Albers, A.; Burger, W.
2007. Vortrag / MDA - Motion, Drive & Automation, 16. April bis 20. April, 2007, Hannover, Hannover
Weiterentwicklung von Dünnschicht-Sensoren zur Messung von Drücken und Temperaturen in hoch belasteten tribologischen Kontakten unter Mischreibungsbedingungen
Albers, A.; Beauvais, S.; Bsul, J.; Burger, W.
2007. Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen; 48. Tribologie-Fachtagung, Gesellschaft für Tribologie e.V. (GfT)
Knowledge-based Support of Decision Making at the Example of Microtechnology
Albers, A.; Burkardt, N.; Deigendesch, T.
2007. JAMRIS - Journal of Automation, Mobile Robotics and Intelligent Systems, 1 (4), 16–20
Innovative trockenlaufende Reibkupplungen auf Basis ingenieurkeramischer Friktionswerkstoffe - Tribologische Charakterisierung auf Systemebene
Albers, A.; Ott, S.; Mitariu, M.
2007. Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen; 48. Tribologie-Fachtagung, Göttingen, Germany, 24. - 26. September 2007, Gesellschaft für Tribologie e.V. (GfT)
Unterstützung der kreativen Phasen im Produktentwicklungsprozess mit dem Elementmodell C&CM
Albers, A.; Alink, T.; Oerding, J.
2007. 5. Gemeinsames Kolloquium Konstruktionstechnik 2007. Hrsg.: R. Stelzer, Dresden
A study of integrated document and connection caching in the WWW
Albers, S.; Stee, R. van
2007. Algorithmica, 47 (3), 239–252
Friction and wear characteristics of electrodeposited nanocrystalline nickel-tungsten alloy films
Bade, K.; Haseeb, A. S. M. A.; Albers, U.
2007. 16th Internat.Conf.on Wear of Materials, Montreal, CDN, April 15-17, 2007
Trockenlaufende Fahrzeugkupplung mit keramischen Friktionswerkstoffen
Mitariu, M.; Albers, A.
2007. Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe. 3. Statuskolloquium, SFB 483. Hrsg.: K.-H. Zum Gahr, 29–38, Universität Karlsruhe (TH)
Nasslaufende Lamellenkupplung mit keramischen Komponenten
Bernhardt, J.; Albers, A.
2007. Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe. 3. Statuskolloquium, SFB 483. Hrsg.: K.-H. Zum Gahr, 10 S., Universität Karlsruhe (TH)
Constitution - microstructure - property correlations of magnetron-sputtered TiC/a-C nanocomposite coatings as a function of the Ti:C ratio and the bias voltage
Ziebert, C.; Stüber, M.; Rinke, M.; Albers, U.; Lattemann, M.; Helmersson, U.; Lewin, E.; Jansson, U.
2007. 14th Internat.Symp.on Metastable and Nano Materials (ISMANAM2007), Corfu, GR, August 26-30, 2007
Simulation und Berechnung
Albers, A.; Binz, H.; Höhn, B.; Blancha, M.; Häußler, P.; Jaros, M.; Minx, J.
2007. Innovationspotenziale in der Produktentwicklung. Hrsg.: F.-L- Krause, -, Carl Hanser Verlag
Micro-specific design flow for tool-based microtechnologies
Albers, A.; Deigendesch, T.; Marz, J.
2007. Microsystem Technologies, 13 (3), 305–310
Topology Optimization in controlled dynamic systems
Albers, A.; Ottnad, J.; Minx, J.; Häußler, P.
2007. NAFEMS World Congress, 22. - 25. Mai 2007, Vancouver, Canada, Vancouver
Modelling of complex three-dimensional grain structures
Albers, A.; Enkler, H.-G.
2007. NAFEMS World Congress, 22. - 25. Mai 2007, Vancouver, Canada, -, Vancouver
Innovative schaltbare Kupplungssysteme auf Basis ingenieurkeramischer Friktionswerkstoffe
Albers, A.; Ott, S.; Mitariu, M.
2007. Kupplungen und Kupplungssysteme in Antrieben 2007 : Erfahrungen, Methoden und Innovationen in Maschinenbau und Fahrzeugtechnik ; Tagung Wiesloch, 25. und 26. April 2007, VDI Verlag
Simulation mechatronischer Systeme an Hand geregelter hybrider Mehrkörpersysteme
Albers, A.; Ottnad, J.; Häußler, P.
2007. Entwurf mechatronischer Systeme : Grundlagen, Methoden und Werkzeuge ; Adaption und Selbstoptimierung ; Integration Mechanik und Elektronik, Miniaturisierung: 5. Paderborner Workshop Entwurf Mechatronischer Systeme, 22. und 23. März 2007, Heinz-Nixdorf-Istitut. Hrsg.: J. Gausemeier, Heinz-Nixdorf- Inst
Inspection of Micro Gear Wheels with a Modified Tangential Composite Inspection
Albers, A.; Burkardt, N.; Hauser, S.
2007. 10th CIRP Conference on Computer Aided Tolerancing, March 21st - 23rd, Erlangen, Germany, -, Shaker Verlag
Attempt of Prediction of Vehicle Longitudinal Dynamic Performance using Artificial Neural Networks (ANN)
Albers, A.; Ott, S.; Wang, J.
2007. Proceedings of the ASME IDETC: 9th International Conference on Advanced Vehicle and Tire Technologies (AVTT), 04.-07. September 2007, Las Vegas, Nevada, Las Vegas
Parameteroptimierung mit CAD-basierten Finite-Elemente-Modellen
Albers, A.; Enkler, H.-G.; Maier, T. O.; Weiler, H.
2007. Konstruktion - Zeitschrift für Produktentwicklung, 59 (4), 103–106
Parametrisation of Finite Element Models - An overview
Albers, A.; Weiler, H.
2007. Proceedings / 10th CIRP Conference on Computer Aided Tolerancing, Specification and Verification for Assemblies. Ed.: A. Weckenmann, 1 CD-Rom, Shaker Verlag
Robustheits- und Zuverlässigkeitsanalysen zur Optimierung eines Planetengetriebes unter realitätsnahen Randbedingungen
Albers, A.; Weiler, H.; Bangert, C.; Puls, C.
2007. TTZ 2007 : Entwicklung und Betrieb zuverlässiger Produkte; Tagung Stuttgart, 22. und 23. März 2007, 213–224, VDI Verlag
Domänenübergreifende Spezifikation und Optimierung von Hybridfahrzeugen
Albers, A.; Düser, T.; Schyr, C.
2007. ATZ/MTZ Konferenz: Hybridfahrzeuge - Herausforderungen in Entwicklung und Serieneinführung, 14.-15- November 2007, Boxberg, Germany, -, Boxberg
Virtuelle Streckenbibliothek für die Antriebsstrangentwicklung
Albers, A.; Düser, T.; Ott, S.; Seifermann, A.
2007. SimPEP - Kongress für Simulation im Produktentwicklungsprozess, 14.-15. Juni 2007, Würzburg, Germany, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Systematic Driveability Development for cars with complex structures
Albers, A.; Düser, T.; Ott, S.
2007. Proceedings / 2. Internationales Symposium für Entwicklungsmethodik, 13./14. November 2007, Wiesbaden; 1 CD-Rom, AVL Deutschland
On the simulation of molded micro components and systems
Albers, A.; Enkler, H.-G.; Leslabay, P.
2007. HARMST 2007 - 7th International Workshop on High-Aspect-Ratio Micro-Structure Technology, 7. - 9. Juni 2007, Besancon, Frankreich, Besancon
Structural Optimization of Components in Controlled Mechanical Systems
Albers, A.; Ottnad, J.; Häußler, P.; Minx, J.
2007. Proceedings of IDETC/MSNDC 2007, ASME International Design Engineering Technical Conferences, The American Society of Mechanical Engineers (ASME)
Support of Design Engineering Activity for a Systematic Improvement of Products
Albers, A.; Alink, T.
2007. The Future of Product Development - 17th CIRP Design Conference - Berlin, Germany, 26-28 March 2007. Part 3. Ed.: F.-L. Krause, 105–114, Springer Verlag. doi:10.1007/978-3-540-69820-3_12
Überwachung geschmierter Kontakte durch Ultraschall-Körperschallanalyse
Albers, A.; Dickerhof, M.; Burger, W.
2007. Schwingungsüberwachung und Diagnose von Maschinen : Tagung Würzburg, 27./28. Februar 2007, -, VDI Verlag
Design of Armar III - a new Humanoid Robot
Albers, A.; Brudniok, S.; Ottnad, J.; Sauter, C.; Sedchaicharn, K.
2007. Proceedings / RAAD 2007 - 16th International Workshop on Robotics in Alpe-Adria-Danube Region, June 7-9, 2007, Ljubljana, Slovemia, Ljubljana
Methodische Entwicklung von hochintegrierten mechatronischen Systemen am Beispiel eines Humanoiden Roboter
Albers, A.; Brudniok, S.
2007. Mechatronik 2007 - Innovative Produktentwicklung, 793–802, VDI Verlag
Topology Optimization in Mechatronic Systems
Albers, A.; Ottnad, J.; Häußler, P.; Minx, J.
2007. Design for society : knowledge, innovation and sustainability - ICED ’07, Paris; France; 28 July 2007 through 31 July 2007, 9 S., Paris
Simulation and Test within Driveline Development - Success by means of integrated Processes
Albers, A.; Düser, T.
2007. AVL - Advanced Simulation Technologies. International User Meeting, 11.-12. Juni 2007, Graz, Österreich, Graz
Überwachung von Gleitkontakten mittels Ultraschallemissionsanalyse
Albers, A.; Dickerhof, M.
2007. BK-Newsletter / Mitteilungen des Berliner Kreis - Wissenschaftliches Forum für Produktentwicklung e.V, 1 (8)
Phase formation, microstructure and properties of nanostructured hard coatings of the material system Cr-Al-N-O
Stüber, M.; Albers, U.; Leiste, H.; Ziebert, C.; Ulrich, S.
2007. Internat.Conf.on Metallurgical Coatings and Thin Films (ICMCTF 2007), San Diego, Calif., April 23-27, 2007
The technological potential of innovative Ti-Al-N-C nanocomposite coatings in dry machining - wear studies and cutting tests in milling and gear cutting operations
Stüber, M.; Albers, U.; Leiste, H.; Ulrich, S.; Sanz, C.; Fuentes, E.; Solay, M.; Garcia, A.; Levardy, I.
2007. 6th Internat.Conf.on High Speed Machining (HSM 2007), San Sebastian, E, March 21-22, 2007
Potenziale von Hybridantrieben in mobilen Arbeitsmaschinen
Albers, A.; Ott, S.; Seifermann, A.
2007. Hybridantriebe für mobile Arbeitsmaschinen. Informationstagung des VDMA und der Universität Karlsruhe (TH), 22. Februar 2007, Karlsruhe, Germany, 13 S., Wiss. Verein für Mobile Arbeitsmasch
2006
14. Aachener Kolloquium Fahrzeug und Motorentechnik
Albers, I.
2006. Automobiltechnische Zeitschrift, 108 (3), 226–230
Research Method for Lubricated Mulitdisc Clutches
Albers, A.; Bernhardt, J.; Ott, S.
2006. International Conference on Mechanical Transmissions (ICMT) : Chongqing, P. R. China, Sept. 26 - 30, 2006. Vol.: 1. Ed.: D. Qin, 670–673, Science Press
A New Approach in Product Development based on Systems Engineering and Systematic Problem Solving
Albers, A.; Meboldt, M.
2006. DS 41: Proceedings of AEDS 2006 Workshop. 15th Workshop on Applied Engineering Design Science, AEDS 2006; Pilsen; Czech Republic; 27 October 2006 through 28 October 2006. Ed. : V. Vanek, 5–12, The Design Society
KALEP-Karlsruher Education Model of Product Development an Competence Oriented Education for Engineering Design and Product Development
Albers, A.; Meboldt, M.
2006. International Design Research Symposium, November 10-11, 2006, Seoul, The Korean Society of Mechanical Engineers
Modellierung und Simulation mit Hilfe der Methode "CoupAction" für Kupplungen mit Organischen und Ingenieurkeramischen Friktionswerkstoffen
Albers, A.; Karrar, C.; Mitariu, M.; Ott, S.
2006. Schwingungen in Antrieben 2006 : Tagung Fulda, 24. und 25. Oktober 2006, 395–418, VDI Verlag
Überwachung tribologischer Kontakte mittels Körperschallanalyseim hohen Ultraschallbereich - neue Ergebnisse
Albers, A.; Burger, W.; Dickerhof, M.
2006. GfT - Gesellschaft für Tribologie, Tagungsband Tribologie - Fachtagung 2006, Göttingen, 25. - 27. September, 2006, Gesellschaft für Tribologie e.V. (GfT)
ARMAR III - Design of the upper body
Albers, A.; Brudniok, S.; Ottnad, J.; Sauter, C.; Sedchaicharn, K.
2006. Second International Workshop on Human Centered-Robotic Systems 2006, Technische Universität München, Munich, Germany, 6. -7. October, 2006, 63–68, TU München
ARMARIII, The humanoid robot of SFB 588 - Design of the upper body
Albers, A.; Brudniok, S.; Ottnad, J.; Sauter, C.; Sedchaicharn, K.
2006. French-German Workshop on Humanoid and Legged Robots, Karlsruhe, Germany, 25. - 26. September, 2006
Upper Body of a new Humanoid Robot - the Design of ARMAR III
Albers, A.; Brudniok, S.; Ottnad, J.; Sauter, C.; Sedchaicharn, K.
2006. 6th IEEE-RAS International Conference on Humanoid Robots, HUMANOIDS, Genoa, Italy, 4. - 6. December, 2006, 308–313, Institute of Electrical and Electronics Engineers (IEEE)
Dünnschichtsensoren-Einsatz zur Erfassung von Tribokontaktgrößen
Albers, A.; Beauvais, S.
2006. ICMT (International Conference of Mechatronics), 2006, University of Applied Sciences, Karlsruhe
Der Antriebsstrang von morgen - vernetzte Forschung und Entwicklung
Albers, A.
2006. Karlsruher Wirtschaftsspiegel, 49 (Juli), 2
Methoden und Werkzeuge zur modellbasierten Validierung von Hybridantrieben
Albers, A.; Gschweitl, K.; Schyr, C.; Kunzfeld, S.
2006. Automobiltechnische Zeitschrift, 108 (11), 980–987. doi:10.1007/BF03221840
Methoden zur Analyse und Vermeidung von Getrieberasseln in konventionellen und alternativen Antriebsstrangsystemen
Albers, A.
2006. Akustik zukünftiger Fahrzeug- und Antriebskonzepte : ATZ/MTZ-Konferenz Akustik, Stuttgart, 17.-18. Mai 2006, Hirzel Verlag
Influence of the microstructure on the strain of micro components
Albers, A.; Metz, D.
2006. Microsystem technologies, 12 (7), 685–690. doi:10.1007/s00542-006-0084-4
Finite element analysis of V‐shaped cantilevers for atomic force microscopy under normal and lateral force loads
Müller, M.; Schimmel, T.; Häußler, P.; Fettig, H.; Müller, O.; Albers, A.
2006. Surface and interface analysis, 38 (6), 1090–1095. doi:10.1002/sia.2321
Topologieoptimierung dynamisch belasteter Bauteile durch Integration von Optimierung, Mehrkörpersimulation und Lebensdaueranalyse
Häußler, P.; Albers, A.; Puchner, K.; Fischer, F.; Witteveen, W.
2006. NAFEMS Magazin, 3 (1), 26–29
Methode zur Berechnung von geschmierten Friktionskontakten in Mischreibungsgebieten
Albers, A.; Nowicki, L.; Enkler, H.-G.
2006. NAFEMS Magazin, 5 (3), 45–50
Robust Design zylinderischer Schraubenfedern
Albers, A.; Weiler, H.; Salm, H.
2006. Federn - Unverzichtbare Bauteile der Technik : Tagung Fulda, 7. und 8. November 2006, VDI Verlag
Development of a method for the analysis of mixed friction problems
Albers, A.; Nowicki, L.
2006. Simulation of coupled flow phenomena (multifield FSI) - application and trends : 3rd NAFEMS CFD-Seminar ; 08th - 09th May 2006, Wiesbaden, Germany, NAFEMS Contact DACH & Nordic Countries
Modellierung und Simulation mit Hilfe der Methode „CoupAction“ für Kupplungen mit organischen und ingenieurkeramischen Friktionswerkstoffen
Albers, A.; Karrar, C.; Mitariu, M.; Ott, S.
2006. Schwingungen in Antrieben 2006 : Tagung Fulda, 24. und 25. Oktober 2006, VDI Verlag
Development of a method for the analysis of mixed friction problems
Albers, A.; Nowicki, L.; Enkler, H.-G.
2006. International Journal of Applied Mechanics and Engineering, 11 (3), 479–490
Monitoring Lubrication Regimes in Sliding Bearings Using Acoustic Emission Analysis
Albers, A.; Burger, W.; Scovino, R.; Dickerhof, M.
2006. Practicing Oil Analysis, 9 (3), 8–12
Reibschwingungen beim Trockenlauf
Albers, A.; Ott, S.; Karrar, C.
2006. Die Antriebstechnik, 7-845 (7-8), 104
CVT-Beschichtung
Albers, A.; Behrendt, M.; Ott, S.; Poll, G.; Kruse, T.
2006. Die Antriebstechnik: Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen, 45 (9)
Competence-profile oriented education with the Karlsruhe Education Model for Product Development (KaLeP)
Albers, A.; Burkhardt, N.; Düser, T.
2006. World Transactions on Engineering and Technology Education, 5 (2), 271–274
Selection and influence of load cases for the topology optimization of the component structure of parallel kinematic machines
Fleischer, J.; Albers, A.; Minx, J.; Tröndle, M.
2006. Parallel kinematic machines in research and practice : The 5th Chemnitz Parallel Kinematics Seminar, PKS 2006, April 25 - 26, 2006 [proceedings]. Ed.: R. Neugebauer, 879–882, Verlag Wissenschaftliche Scripten
Hochleistungsingenieurkeramik als Friktionswerkstoffe im Einsatz bei trockenlaufenden Fahrzeugkupplungen
Albers, A.; Mitariu, M.; Bernhardt, J.
2006. Symposium Hochleistungskeramik, 4. - 5. April 2006, Stuttgart
Methoden zur Analyse und Vermeidung von Getrieberasseln in konventionellen und alternativen Antriebssträngen
Albers, A.; Seifermann, A.
2006. ATZ/MTZ Konferenz "Akustik zukünftiger Fahrzeug- und Antriebskonzepte", Stuttgart, 17. - 18. Mai 2006, Stuttgart
Finite Element Thermal Analysis of a Ceramic Clutch
Czél, B.; Váradi, K.; Albers, A.; Mitariu, M.
2006. Gépészet 2006: Proceedings of Fifth Conference on Mechanical Engineering, Budapest, Hungary, May 25-26, 2006, -, Budapest
Development of a method for the analysis of mixed friction problems using the Finite Element Simulation
Albers, A.; Nowicki, L.; Enkler, H.-G.
2006. Tribologie Fachtagung 2006 "Reibung, Schmierung und Verschleiß", 25. - 27. September 2006, Göttingen, -, Gesellschaft für Tribologie e.V. (GfT)
Bedeutung der Verteilungsfunktionen der Eingangsgrößen für die Qualität von Robustheitsanalysen in der Simulation
Albers, A.; Weiler, H.
2006. Virtual testing - simulation methods as integrated part of an efficient product development : Seminar ; 10th - 11th May 2006, Wiesbaden, Germany, NAFEMS Kontakt DACH & Nordic Countries
Processes, methods and tools in product development of multi-scale systems
Albers, A.; Burkhardt, N.; Deigendesch, T.
2006. Tools and methods of competitive engineering : proceedings of the Sixth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2006, April 18 - 22, Ljubljana, Slovenia, Vol. 1. Hrsg.: I. Horváth, 127–137, Delft University of Technology (TU Delft)
More than Professional Competence - The Karlsruhe Education Model for Product Development (KaLep)
Albers, A.; Burkardt, N.; Düser, T.
2006. 2nd International CDIO Conference, 13 - 14 June 2006, Linkoping, Sweden, -, Linkoping
Global Engineering Alliance for Research and Education (GEARE)
Albers, A.; Burkardt, N.; Hauser, S.
2006. 2006 International Mechanical Engineering Education Conference "Mechanical Engineering Education and Global Industry", March 31 - April 4, 2006, Beijing, China, -, Beijing
The Karlsruhe Education Model for Product Development "KALEP" in Higher Education
Albers, A.; Burkardt, N.; Meboldt, M.
2006. DESIGN 2006 - 9th International Design Conference, May 15-18, 2006, Dubrovnik, Croatia, 1049–1056, Faculty of Mechanical Engineering and Naval Architecture
Einsatz von Simulationsmodellen zur Beurteilung von alternativen Getriebekonzepten im frühen Produktentstehungsprozess
Albers, A.; Ott, S.; Seifermann, A.
2006. Innovative Fahrzeugantriebe : Tagung Dresden, 9. und 10. November 2006, Posterbeitrag, VDI Verlag
KaLeP - Karlsruher Lehrmodell für Produktentwicklung
Albers, A.; Meboldt, M.
2006. Deutsche Gesellschaft für wissenschaftliche Weiterbildung und Fernstudium e. V. (DGWF, Jahrestagung, 13. - 15. September, Karlsruhe, Wissensmanagement und wissenschaftliche Weiterbildung
Development of the Highly Integrated Mechatronical Systems of Humanoid Robots
Albers, A.; Brudniok, S.
2006. The 17th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Mechatronics and Robotics", 8 - 11 November 2006, Wien, Österreich, -, DAAAM International
Dünnschichtsensoren-Einsatz zur Erfassung von Tribokontaktgrößen
Albers, A.; Beauvais, S.
2006. ICMT 2006 - International Conference on Mechanical Transmissons, 26-30 September, 2006, Chongqing, China, -, Chongqing
Herstellung von Dünnschichten und Dünnschichtsensoren
Albers, A.; Bsul, J.
2006. ICMT 2006 - International Conference on Mechanical Transmissons, 26-30 September 2006, Chongqing, China, -, Chongqing
Methods for modeling the grain structure within the dimensioning process of micro components
Albers, A.; Enkler, H.-G.
2006. Material Modeling - FE Simulations of the Behavior of Modern Industrial Materials Including their Failure, NAFEMS, 5. - 6. Dezember, 2006, Wiesbaden, Germany, -, Wiesbaden
Armar III - Design of the upper body
Albers, A.; Brudniok, S.; Ottnad, J.; Sauter, C.; Sedchaicharn, K.
2006. Proceedings. 2nd International Workshop on Human Centered Robotic Systems 2006, October 6 - 7, 2006, Technische Universität München, Munich, Germany. Ed.: K. Diepold, Technische Universität
Upper Body of a new Humanoid Robot - the Design of ARMAR III
Albers, A.; Brudniok, S.; Ottnad, J.; Sauter, C.; Sedchaicharn, K.
2006. Humanoids 06 - 2006 IEEE-RAS International Conference on Humanoid Robots, Genova, Italy, December 4 - 6, 2006
FE Thermal Analysis of Ceramic Clutch
Czél, B.; Váradi, K.; Albers, A.; Mitariu, M.
2006. General and plenary lectures from the 6th EUROMECH Solid Mechanics Conference, Budapest, Hungary, August 28 - September 1, 2006, Budapest
ARMARIII, the humanoid robot of SFB 588 - Design of the upper body
Albers, A.; Brudniok, S.; Ottnad, J.; Sauter, C.; Sedchaicharn, K.
2006. French-German Workshop on Humanoid and Legged Robots 2006, 25. - 26. September 2006, Karlsruhe, Germany, -, Universität Karlsruhe (TH)
Product Development Regarding Micro Specific Tasks - Challenges in Designing for Production and Assembly
Albers, A.; Oerding, J.; Deigendesch, T.
2006. Design & innovation for a sustainable society : 16th CIRP International Design Seminar, July 16 - 19, 2006, Kananaskis, Alberta, Canada, CD-Rom, -, Kananaskis
Model based method for a sophisticated dimensioning of clutch systems in view of the occurrence of frictional vibration
Albers, A.; Ott, S.; Karrar, C.
2006. International Conference on Mechanical Transmissions, ICMT, Chongqing University, China, 25. - 29. September 2006, Chongqing
Technical integration of ceramic components and experimental analysis in unlubricated friction systems
Albers, A.; Ott, S.; Mitariu, M.
2006. ICMT - International Conference on Mechanical Transmissions - Chongqing, China, 26-30 September, 2006. Vol.: 2. Ed.: D. Qin, 1150–1154, Science Press
A tribological system measuring technique for the identification of nvh-relevant effects in the working surface pair of a vehicle clutch
Albers, A.; Ott, S.
2006. ICMT 2006 - International Conference on Mechanical Transmissions, 25. - 29. September, 2006, Chongqing, China, -, Chongqing
Methodical Powertrain Validation with Behavioural Mock Ups
Albers, A.; Düser, T.; Schyr, C.
2006. ICMT - International Conference on Mechanical Transmissions, 25. - 29. September, 2006, Chongqing, China, 25. - 29. September 2006, -, Chongqing
Tribologische Systemuntersuchungen an Fahrzeugkupplungen mit integrierten ingenieurkeramischen Komponenten
Albers, A.; Ott, S.; Mitariu, M.
2006. Getriebe in Fahrzeugen 2006 : Tagung Friedrichshafen, 27. und 28. Juni 2006, 445–468, VDI Verlag
Integration von Funktionsprüfung und dimensioneller Messtechnik zu einer optimierten QS-Strategie für Mikroverzahnungen
Albers, A.; Fleischer, J.; Burkhardt, N.; Hauser, S.; Behrens, I.
2006. Messtechnik für Mikro- und Nanoengineering : Tagung Erlangen, 29. und 30. November 2006, -, VDI Verlag
Experimentelle Untersuchungen zur technischen Integration ingenieur-keramischer Komponenten in trockenlaufenden Friktionssystemen
Albers, A.; Mitariu, M.
2006. Tribologie und Schmierungstechnik: Organ der Gesellschaft für Tribologie und Organ der Österreichischen Tribologischen Gesellschaft, 53 (3), 22–26
Systemtribometer zur Untersuchung hochbelasteter nasslaufender Friktionskontakte unter mehrachsigen Gleitbewegungen
Albers, A.; Behrendt, M.; Ott, S.
2006. Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen, 47. Tribologie-Fachtagung, 25. bis 27. September 2006 in Göttingen, Gesellschaft für Tribologie e.V. (GfT)
Überwachung tribologischer Kontakte mittels Körperschallanalyse im hohen Ultraschallbereich - neue Ergebnisse
Albers, A.; Dickerhof, M.; Burger, W.
2006. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen ; 47. Tribologie-Fachtagung, 25. bis 27. September 2006 in Göttingen, -, Gesellschaft für Tribologie e.V. (GfT)
Modellbasierte Methode zur Dimensionierung trockenlaufender Kupplungssysteme auf Basis ingenieurkeramischer und organischer Friktionspaarungen
Albers, A.; Ott, S.; Karrar, C.; Mitariu, M.
2006. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen ; 47. Tribologie-Fachtagung, 25. bis 27. September 2006 in Göttingen, Gesellschaft für Tribologie e.V. (GfT)
Research Method for Lubricated Multidisc Clutches
Albers, A.; Ott, S.; Bernhardt, J.
2006. International Conference on Mechanical Transmissions, ICMT, Chongqing University, China, 25. - 29. September 2006, -, Chongqing
Experimentelle Untersuchungen zum Systemverhalten von Keramik-Keramik Friktionspaarungen in nasslaufenden Friktionssystemen am Beispiel eines CVT-Variators
Albers, A.; Ott, S.; Bernhardt, J.
2006. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen ; 47. Tribologie-Fachtagung, 25. bis 27. September 2006 in Göttingen, Gesellschaft für Tribologie e.V. (GfT)
KALEP - Karlsruher Education Model of Product Development and Competence Oriented Education for Engineering Design and Product Development
Albers, A.; Meboldt, M.
2006. International Design Research Symposium, 10. - 11. November, 2006, Seoul, Korea, -, Seoul
Ein neuer Ansatz zur Produktentwicklung basierend auf Systems Engineering und systematischer Problemlösung
Albers, A.; Nurkardt, N.; Meboldt, M.
2006. FDIBA - 15 Jahre Fakultät für deutsche Ingenieur- und Betriebswirtschaftsausbildung, 23. - 25. November, 2006, Sofia, Bulgaria, -, Sofia
Impact of Distribution Functions of Input Parameters on the Quality of Robustness Analysis in Simulation
Albers, A.; Weiler, H.
2006. Virtual testing - simulation methods as integrated part of an efficient product development : Seminar ; 10th - 11th May 2006, Wiesbaden, Germany, NAFEMS Kontakt DACH & Nordic Countries
Wear studies and dry cutting tests on hardened steel and graphite with PVD nanocomposite coatings of the material system Ti-Al-N-C
Stüber, M.; Albers, U.; Ulrich, S.; Sanz, C.; Fuentes, E.; Solay, M.; Garcia, A.; Hovsepian, P.; Gee, I.
2006. 33rd Internat.Conf.on Metallurgical Coatings and Thin Films (ICMCTF 2006), San Diego, Calif., May 1-5, 2006
The correlation between the constitution, microstructural evolution and properties of non-reactively magnetron-sputtered TiC/a-C nanocomposite coatings. A Review
Stüber, M.; Albers, U.; Ziebert, C.; Rinke, M.; Halbritter, J.; Ulrich, S.; Lattemann, M.; Helmerson, U.; Lewin, E.; Jansson, U.
2006. 10th Internat.Conf.on Plasma Surface Engineering (PSE 2006), Garmisch- Partenkirchen, September 11-15, 2006 (Poster)
Force constants and detection sensitivities of V-shaped cantilevers for atomic force microscopy under normal and lateral force loads
Müller, M.; Schimmel, T.; Fettig, H.; Häussler, P.; Müller, O.; Albers, A.
2006. Internat.Conf.on Nanoscience and Technology (ICN+T), Basel, CH, July 30 - August 4, 2006
Microstructural and topographical evolution of magnetron-sputtered TiC/a-C nanocomposite coatings in dependence of the TI:C concentration
Stueber, M.; Rinke, M.; Ziebert, C.; Albers, U.; Ulrich, S.
2006. Spring Meeting of the European Materials Research Society, Nice, F, May 29 - June 2, 2006
Multifunctional nanolaminated PVD coatings in the system Ti-Al-N-C by combination of metastable fcc phases and nanocomposite microstructures
Stüber, M.; Albers, U.; Leiste, H.; Ulrich, S.; Holleck, H.; Barna, P. B.; Kovacs, A.; Hovsepian, P.; Gee, I.
2006. Surface and Coatings Technology, 200, 6162–71. doi:10.1016/j.surfcoat.2005.11.012
Shape optimization of parts in dynamic mechanical systems regarding fatigue
Häußler, P.; Albers, A.
2006. Proceedings of the TMCE (Tools and Methods for Competitive Engineering), Ljubljana, Slovenia 2006. Ed.: I. Horvath, -
2005
Stability Maintenance of a Humanoid Robot underDisturbance with Fictitious Zero-Moment Point (FZMP)
Yin, C.; Albers, A.; Häußler, P.; Ottnad, J.
2005. IEEE IRS/RSJ International Conference on Intelligent Robots and Systems, IROS 2005; Edmonton, AB; Canada; 2 August 2005 through 6 August 2005., 1780–1787, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IROS.2005.1545236
Modeling and Validation in Design
Albers, A.; Metz, D.
2005. Microengineering of Metals and Ceramics: Part I: Design, Tooling and Injection Molding. Ed.: D. Löhe, 29–50, Wiley-VCH Verlag. doi:10.1002/9783527616725.ch2
A new Approach for Optimization of Sheet Metal Components
Albers, A.; Weiler, H.; Emmrich, D.; Lauber, B.
2005. Advanced materials research, 6-8, 255–262. doi:10.4028/www.scientific.net/AMR.6-8.255
Increasing the Performance of Motor Vehicle Clutches by the use of Ceramics as Friction Material and the resulting Effects on System Design
Albers, A.; Mitariu, M.; Arslan, A.
2005. Proceedings of World Tribology Congress III Conference, Washington, D.C.; USA, September 12-16, 2005, 283–289, The American Society of Mechanical Engineers (ASME)
Reibschwingungen in trockenlaufenden Kupplungen und Bremsen
Albers, A.; Karrar, C.
2005. Special Antriebstechnik : eine Sonderausgabe der Zeitschriften VDI-Z und Konstruktion, 2005
Computer Aided Evaluation of Design Rules for Micro Parts
Albers, A.; Burkardt, N.; Marz, J.; Hauser, S.
2005. 15th International Conference on Engineering Design, ICED 05, Melbourne, VIC, Australia, 15. - 18. August, 2005, 11, The Design Society
Vergleichende Untersuchung des Systemverhaltens von Keramik-Keramik-Friktionspaarungen am Beispiel eines CVT-Getriebes
Albers, A.; Bernhardt, J.
2005. Tribologie Fachtagung 2005, Reibung, Schmierung und Verschleiß, Göttingen, 26. - 28. September, 2005, Gesellschaft für Tribologie e.V. (GfT)
FE Contact and thermal simulation of an alumina-steel dry sliding friction pair
Albers, A.; Lestyan, Z.; Varadi, K.
2005. Computer methods and experimental measurements for surface effects and contact mechanics VII. Ed.: J.T.M. De Hosson, 35–44, WIT Press
Funktionsorientierte Klassierung, Auswahl und Berechnung von Kupplungen in Antriebssträngen
Albers, A.; Behrendt, M.
2005. Dresdner Maschinenelemente Kolloquium - DMK 2005, 1.-2. Dezember, 2005, Dresden, Germany, Dresden
New Trends in Clutch System Design for Automotive Applications
Albers, A.; Behrendt, M.
2005. Proceedings of the 4th International CTI Symposium - Innovative Automotive Transmissions, H1, Dec. 5-9th, 2005, Berlin, Germany, Berlin
Design Rules for Ceramic Microcomponents
Albers, A.; Burkardt, N.; Hauser, S.
2005. 4M2005 : 1st International Conference on Multi-Material Micro Manufacture, 29 June - 1 July 2005, Forschungszentrum Karlsruhe, Karlsruhe, Germany, Elsevier
Method Using a Self-organizing Map for Driver Classification as a Precondition for Customer Oriented Design
Albers, A.; Albrecht, M.
2005. Proceedings of the 15th International Conference on Engineering Design ICED 05, August 15th-18th, 2005, Melbourne, Australia, Melbourne
Model Based Verification of Automotive Powertrains
Albers, A.; Schyr, C.
2005. Proceedings of the 15th International Conference on Engineering Design ICED 05, August 15th-18th, 2005, Melbourne, Australia, Melbourne
Approaches for the Synthesis of Technical Systems within the Contact & Channel Model C&CM
Albers, A.; Burkardt, N.; Ohmer, M.
2005. 15th International Conference on Engineering Design ICED 05, August 15th-18th, 2005, Melbourne, Australia, 11 S., Melbourne
Electrochemical behavior and analytical performance of a new iridium-based ultramicroelectrode array (UMEA) sensor
Xie, X.; Berner, Z.; Albers, J.; Stüben, D.
2005. Microchimica acta, 150, 127–145
Fertigungsrestriktionen für die Strukturoptimierung
Albers, A.; Harder, J.; Helfrich, T.; Weiler, H.
2005. Industrie Management, Schwerpunkt Digital Engineering, 21 (2)
Clutches using engineering ceramics as friction materials
Albers, A.; Arslan, A.; Mitariu, M.
2005. Materialwissenschaften und Werkstofftechnik, 36 (3-4), 102–107
Mechatronical Design of a Humanoid Robot in an Educational Project
Albers, A.; Brudniok, S.
2005. Engineering Design and the Global Economy. 15th International Conference on Engineering Design - ICED 2005, Melbourne, 15. - 18. August 2005. Hrsg.: A. Samuel, -, The Design Society
SPALTEN Problem Solving Methodology in the Product Development
Albers, A.; Burkhardt, N.; Meboldt, M.; Saak, M.
2005. Engineering Design and the Global Economy: 15th International Conference on Engineering Design - ICED 2005, Melbourne, 15. - 18. August 2005. Hrsg.: A. Samuel, 90671, The Design Society
Shape optimization of structural parts in dynamic mechanical systems based on fatigue calculations
Häußler, P.; Albers, A.
2005. Structural and multidisciplinary optimization, 29 (5), 361–373
Abbildung der individuellen subjektiven Komfortbeurteilung von Kunden aus objektiven Messwerten am Beispiel des automatisierten Anfahrens
Albers, A.; Albrecht, M.
2005. 5. Tagung Dynamisches Gesamtsystemverhalten von Fahrzeugantrieben, Augsburg, 1.- 2. März 2005. Hrsg.: A. Laschet, 30–47, expert-Verlag
Modeling and validation
Albers, A.; Metz, D.
2005. Microengineering of metals and ceramics.Hrsg.:D. Löhe, -, Wiley-VCH Verlag
Discussion about the reliable dimensioning of micro components and potentials for stress decrease
Albers, A.; Metz, D.
2005. Proceedings of the 5th International Conference of the European Society for Precision Engineering and Nanotechnology, Montpellier, France 2005. Ed.: F. Chevrier, -
A method for the consideration of influences of the surface roughness on the behaviour and design of global systems
Albers, A.; Nowicki, L.; Minx, J.
2005. 15th International Conference on Engineering Design ICED 05, Melbourne, Australia 2005, -
Continuously variable transmission (CVT) with ceramic components
Albers, A.; Stuffer, A.; Bernhardt, J.
2005. Materialwissenschaft und Werkstofftechnik, 36 (3/4), 96–101
A new approach for optimization of sheet metal components
Albers, A.; Weiler, H.; Emmrich, D.; Lauber, B.; Meske, R.
2005. Sheet Metal 2005. Proceedings of the 11th International Conference, Nürnberg 2005. Hrsg.: M. Geiger, -, Trans. Tech. Publ
Topologieoptimierung dynamisch beanspruchter Bauteile basierend uf Mehrkörpersimulation und Betriebsfestigkeitsanalysen
Albers, A.; Häußler, P.; Puchner, K.; Fischer, F.; Witteveen, W.; Lauber, B.
2005. Optimization in structural mechanics. Optimierung in der Strukturmechanik. Seminar, Wiesbaden 2005, -, NAFEMS Contact DACH
Modellgestützte Methodik zur Erprobung von mechatronischen Antriebsstrangkomponenten
Albers, A.; Schyr, C.
2005. Mechatronik ... : innovative Produktentwicklung.Tagung, Wiesloch 2005, -
Modellgestützte Erprobungsmethodik in der Antriebsstrangentwicklung
Albers, A.; Schyr, C.
2005. Erprobung und Simulation in der Fahrzeugentwicklung: Mess- und Versuchstechnik. Tagung, Würzburg 2005, -, VDI Verlag
Methodischer Entwicklungsprozess der mechatronischen Struktur humanoider Roboter
Albers, A.; Brudniok, S.
2005. Mechatronik ... : innovative Produktentwicklung.Tagung ... / VDI/VDE-Gesellschaft Mess- und Automatiserungstechnik, -
How C&CM can help the designer to find the right principles
Albers, A.; Burkardt, N.; Ohmer, M.
2005. Proceedings of CIRP Design Seminar 2005. New trends in engineering design, 232–241
C&CM - ein konstruktionsmethodisches Denkmodell zum Zusammenhang von Gestalt und Funktion technischer Systeme
Albers, A.; Burkardt, N.; Matthiesen, S.; Ohmer, M.
2005. Berichte aus dem Institut / Institut für Maschinenelemente und Konstruktion, Technische Universität Ilmenau, Festschrift zum Ehrenkolloquium anlässlich der Emeritierungen von Univ.-Prof. Dr.-Ing. Habil. Dr. h.c. Günter Höhne und Univ.-Prof. Dr.-Ing. Habil. Hans-Jürgen Schorcht, Ilmenau: ISLE, [16] S, ISLE
Knowledge-based design environment for primary shaped micro parts
Albers, A.; Burkardt, N.; Hauser, S.; Marz, J.
2005. Microsystem Technologies, 11 (4-5), 254–260
Methoden der Modellierung und Simulation im Mikrobereich
Albers, A.; Metz, D.
2005. Berliner-Kreis-Newsletter, (1), -
Effect of the grain anisotropy on the dimensioning of micro components
Albers, A.; Metz, D.; Nowicki, L.
2005. 50. Internationales Wissenschaftliches Kolloquium "Maschinenbau von Makro bis Nano", Illmenau 2005. Hrsg.: P. Scharff, -, ISLE
Computer aided evalutation of design rules for micro parts
Albers, A.; Burkhardt, N.; Marz, J.; Hauser, S.
2005. 15th International Conference on Engineering Design ICED 05, Melbourne, Australia 2005, -
Vergleichende Untersuchungen des Systemverhaltens von Keramik-Keramik-Friktionspaarungen am Beispiel eines CVT-Getriebes
Albers, A.; Bernhardt, J.
2005. Reibung, Schmierung und Verschleiß. Tribologie-Fachtagung, Göttingen 2005, -, Ges. f. Tribologie
Der Einfluss von Oberflächenmodifikationen auf das Systemverhalten am Beispiel eines CVT-Getriebes
Albers, A.; Bernhardt, J.; Stuffer, A.
2005. Tribologie und Schmierungstechnik, 52 (5), 42–46
Acoustic emission analysis for monitoring of tribological systems
Burger, W.; Albers, A.; Scovino, R.; Dickerhof, M.
2005. Proceedings of World Tribology Congress III Conference, Washington, DC 2005, -, The American Society of Mechanical Engineers (ASME)
Experimentelle Untersuchungen zur technischen Integration ingenieurkeramischer Komponenten in trockenlaufenden Friktionssystemen
Albers, A.; Mitariu, M.
2005. Reibung, Schmierung und Verschleiß. Tribologie-Fachtagung, Göttingen 2005, -, Ges. f. Tribologie
Auswirkung des Korngefüges auf die Beanspruchung von Mikrobauteilen
Albers, A.; Metz, D.
2005. Kolloquium Mikroproduktion. Hrsg.: U. Dilthey, Mainz-Verl
Model based method for a sophisticated dimensioning of clutch systems in view of the occurrence of frictional vibration
Albers, A.; Karrar, C.
2005. Proceedings of World Tribology Congress III Conference, Washington, DC, September 12-16, 2005, The American Society of Mechanical Engineers (ASME)
Micro-specific design for tool-based microtechnologies
Albers, A.; Burkardt, N.; Deigendesch, T.; Marz, J.
2005. Proceedings. HARMST 2005 High Aspect Ratio Micro Structure Technology Workshop, Gyeongju, Korea 2005, -
Micro-specific design for tool-based micromachining
Albers, A.; Burkardt, N.; Deigendesch, T.; Marz, J.
2005. Proceedings. AEDS 2005 Workshop, Pilsen, Czech Republic 2005, -
Entwicklung mechatronischer Komponenten für einen humanoiden Roboter
Albers, A.; Sauter, C.; Brudniok, S.
2005. International Conference on Mechatronics, Karlsruhe 2005, -
Methodische Entwicklung humanoider Roboterkomponenten
Albers, A.; Sauter, C.; Brudniok, S.
2005. 50. Internationales Wissenschaftliches Kolloqium Technische Universität Ilmenau, 19.-23. September 2005, -
Stability maintenance of a humanoid robot under disturbance with fictitious zero-moment point (FZMP)
Yin, C.; Albers, A.; Häußler, P.; Ottnad, J.
2005. 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, Edmonton, Alberta, Canada 2005, -, IEEE Operations Center
Multifunctional nanolaminated PVD coatings in the system Ti-Al-N-C by combination of metastable fcc phases and nanocomposite microstructures
Stüber, M.; Albers, K.; Leiste, H.; Ulrich, S.; Holleck, H.; Barna, P. B.; Kovacs, A.; Hovsepian, P.; Gee, I.
2005. Spring Meeting of the European Materials Research Society, Strasbourg, May 31 - June 3, 2005
A new route towards the scaling-up of solid lubricant TiC-C coatings
Stüber, M.; Ulrich, S.; Albers, U.; Schintlmeister, A.; Wilhartitz, P.
2005. Internat.Conf.on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, Calif., May 2-6, 2005
Constitution and microstructure of magnetron sputtered nanocomposite coatings in the system Ti-Al-N-C
Stüber, M.; Barna, P. B.; Simmonds, M. C.; Albers, U.; Leiste, H.; Ziebert, C.; Holleck, H.; Kovacs, A.; Hovsepian, P.; Gee, I.
2005. Thin Solid Films, 493, 104–112. doi:10.1016/j.tsf.2005.07.290
Prototyp einer wissensbasierten Konstruktionsumgebung für den Entwurf von Mikrobauteilen
Albers, A.; Burkardt, N.; Hauser, S.; Marz, J.
2005. Konstruktion, 57 (1/2), 76–81
Systematische Entwicklung des mechatronischen Gesamtsystems der Arme eines Humanoiden Roboters
Albers, A.; Brudniok, S.
2005. Intelligente mechatronische Systeme. 3. Paderborner Workshop, Paderborn 2005. Hrsg.: J. Gausemeier, -, Heinz Nixdorf Inst
Microstructure, constitution and properties of magnetron sputtered metastable fcc (Ti,Cr)(C,N) hard coatings
Stüber, M.; Albers, U.; Leiste, H.; Ulrich, S.
2005. 12.Bundesdeutsche Fachtagung Plasmatechnologie der Deutschen Gesellschaft für Plasmatechnologie, Braunschweig, 21.-23.März 2005 (Poster)
2004
Optimization of a Machine Tool with Hybrid Kinematics Structure Using Coupled Multi-Body Simulation and Finite Element Analysis
Fleischer, J.; Stengel, G.; Neithardt, W.; Albers, A.; Broos, A.; Schmidt-Ewig, J.-P.
2004. Parallel Kinematic Machines in Research and Practice: The 4th Chemnitz Parallel Kinematics Seminar. Ed.: R. Neugebauer, 545–556, Verlag Wissenschaftliche Skripten
FE Thermal analysis of a ceramic - Steel clutch bench test rig
Albers, A.; Varadi, K.; Lestyan, Z.; Arslan, A.
2004
Influence of the Grain Structure on the Dimensioning of Micro Components
Albers, A.; Metz, D.
2004. FENet Annual Industry Meeting (FENet–Materials Modelling) Lisbon, Portugal, 02.12.04 - 03.12.04, NAFEMS
Advanced Ceramic as Disc Material to Improve the Efficiency of a Continuously Variable Transmission (CVT)
Albers, A.; Stuffer, A.
2004. FISITA 2004 World Automotive Congress, Barcelona, E, May 23-27, 2004..Book of Abstracts. Conference CD, Paper No. F2004V244
Gründungsrelevanz im akademischen Lehrbetrieb
Albers, A.; Burkardt, N.; Meboldt, M.
2004. 10. EXIST Workshop Entrepreneurship Education, 28. September 2004, Rostock, Germany, 10. EXIST Workshop Entrepreneurship Education
Engineering Design in a different Way: Cognitive Perspective on the Contact & Channel Model Approach
Albers, A.; Eckert, C.; Ohmer, M.
2004. Visual and Spatial Reasoning in Design III. Preprints of the 3rd International Conference on Visual and Spatial Reasoning in Design, Massachusetts Institute of Technology, Cambridge, USA 22-23 July 2004. Ed. : J. S. Gero, 3–22, Key Centre of Design Computing and Cognition
Principles for design on the abstract level of the Contact & Channel Model C&CM
Albers, A.; Burkardt, N.; Ohmer, M.
2004. Tools and methods of competitive engineering. Proceedings of the Fifth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2004, April 13 - 17, 2004, Lausanne, Switzerland, 8 S., Millpress
Einsatz multimedialer Präsentationstechniken am IPEK
Albers, A.; Burkardt, N.; Ohmer, M.
2004. Multimedia für Bildung und Wirtschaft. 8. Workshop Multimedia für Bildung und Wirtschaft Fachgebiet Grundlagen der Elektrotechnik, Konstruktionstechnik, Kommunikationswissenschaft, Integrierte Hard-und Software-Systeme, 30.9. - 01.10.2004, Ilmenau, TU
Einsatz multimedialer Präsentationstechniken am IPEK - Institut für Produktentwicklung der Universität Karlsruhe (TH)
Albers, A.; Burkardt, B.; Ohmer, M.
2004. Tagungsband des 8. Workshop Multimedia für Bildung und Wirtschaft, TU Ilmenau, Ilmenau, 30. September - 1. Oktober, 2004, 29–36, TU Ilmenau
The Constructivist Aspect of Design Education in the Karlsruhe Education Model for Industrial Product Delvelopment KaLeP
Albers, A.; Burkardt, B.; Ohmer, M.
2004. The Changing Face of Design Education, 2nd International Engineering and Product Design Education Conference, TU Delft, Delft, the Netherlands, 02. - 03. September, 2004, 119–126, The Design Society
Einsatz Künstlicher Neuronaler Netze zur objektiven Beurteilung des Schwingungskomforts am Beispiel des automatisierten Anfahrens = Application of artificial neural networks for the objective evaluation of vibration comfort at the example of the automated start-up process
Albers, A.; Albrecht, M.
2004. VDI Tagung : Humanschwingungen, Auswirkungen auf Gesundheit, Leistung, Komfort - Lösungen zur Schwingungsoptimierung, Fahrzeuge, Arbeitsmaschinen, handgehaltene und handgeführte Maschinen, Darmstadt, DE, 17.-18. März, 2004, 159–182, VDI Verlag
Development of an ultramicroelectrode arrays (UMEAs) sensor for trace heavy metal measurement in water
Xie, X.; Stüben, D.; Berner, Z.; Albers, J.; Hintsche, R.; Jantzen, E.
2004. Sensors and Actuators. B - Chemical Biochemical Sensors, B 97 (2), 168–173
Investigations on high-performance-ceramic as friction material in a continuously variable transmission (CVT)
Albers, A.; Stuffer, A.
2004. Current Advances in Mechanical Design & Production VIII., Jan 4-6, 2004, Giza, Egypt, 145–151, Giza
Der humanoide Roboter als Herausforderung für den Konstrukteur
Albers, A.; Brudniok, S.
2004. Vortragsreihe Mechatronik-Seminar, Karlsruhe 2004. amka-Arbeitsgemeinschaft Mechatronik und Mikrosystemtechnik, Universität Karlsruhe (TH) ..., Universität Karlsruhe (TH)
Kraftschlussverhalten zwischen Wiegedruckstückekette und Kegelscheibe sowie Systemdesign in stufenlosen Getrieben mit Kegelscheiben aus Ingenieurkeramik
Stuffer, A.; Albers, A.
2004. Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe : 2. Statuskolloquium DFG-Sonderforschungsbereich 483, Karlsruhe, 27. Jan. 2004. Hrsg.: K.-H. ZumGahr, 57–64, Universität Karlsruhe (TH)
Potenzialabschätzung von Belägen aus monolithischer Keramik in trockenlaufenden Friktionssystemen und die Auswirkungen auf die Systemkonstruktion
Arslan, A.; Albers, A.
2004. Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe : 2. Statuskolloquium DFG-Sonderforschungsbereich 483, Karlsruhe, 27. Jan. 2004. Hrsg.: K.-H. ZumGahr, 5–12, Universität Karlsruhe (TH)
Finite element analysis of V-shaped cantilevers for atomic force microscopy under normal and lateral force loads
Müller, M.; Schimmel, T.; Häußler, P.; Fettig, H.; Müller, O.; Albers, A.
2004. Chinese-German Forum on Fundamentals and Technological Perspectives of Nanoscience, Beijing, China, September 26-30, 2004
Influence of the grainstructure on the dimensioning of micro components
Albers, A.; Metz, D.
2004. FENet Annual Industry Meeting, Lisbon, Portugal 2004, -
Simulation of biventricular activity in ventricular pacing on 3D-echocardiographic images using the cellular automation in a porcine model
Reinerth, G.; Schmidt, T.; Seemann, G.; Albers, J.; Doessel, O.; Hagl, S.; Vahl, C.
2004. The thoracic and cardiovascular surgeon / Supplement 1, 52, 22
Planning of surgical antiarrhythmic interventions based on simulations of cardiac electrophysiology
Reinerth, G.; Schmidt, T.; Seemann, G.; Albers, J.; Doessel, O.; Hagl, S.; Vahl, C.
2004. The thoracic and cardiovascular surgeon / Supplement 1, 52, 83
Three-dimensional electrophysiological and morphological computer models for individualtion of antiarrhythmic cardiac surgery
Reinerth, G.; Reumann, M.; Seemann, G.; Kayhan, N.; Albers, J.; Dössel, O.; Hagl, S.; Vahl, C.
2004. Computer Assisted Radiology and Surgery, Chicago, Ill. 2004, 813–818
Elektrophysiological computer models and individualisation of antiarrhytmic cardiac surgery
Reinerth, G.; Reumann, M.; Seemann, G.; Kayhan, N.; Albers, J.; Dössel, O.
2004. Biomedizinische Technik / Ergänzungsband 2, Teil 1, 49, 368–369
Engineering design in a different way: cognitive perspective on the contact and channel model approach
Albers, A.; Eckert, C.; Ohmer, M.
2004. Proceedings of 3rd International Conference Visual and Spatial Reasoning in Design, MIT, Cambridge, USA 2004, -
The constructivist aspect of design education in the Karlsruhe education model for industrial product developemnt KaLeP
Albers, A.; Burkardt, B.; Ohmer, M.
2004. Proceedings of 2nd International Engineering and Product Design Education Conference - The Changing Face of Design Education, 2-3 Spetember, 2004, Delft, The Netherlands, 8 S., Delft
Einsatz multimedialer Präsentationstechniken am IPEK - Institut für Produktentwicklung der Universtität Karlsruhe (TH)
Albers, A.; Burkardt, B.; Ohmer, M.
2004. Tagungsband des 8. Workshop Multimedia für Bildung und Wirtschaft, 30. September und 1. Oktober, 2004, Ilmenau
Design and development process of a humanoid robot upper body through experimentation
Albers, A.; Brudniok, S.; Burger, W.
2004. Proceedings of IEEE-RAS/RSJ International Conference on Humanoid Robots, Santa Monica 2004, -
Neues Messverfahren zur zuverlässigen berührungslosen Detektion heißlaufender Tribokontakte in Verbrennungsmotoren
Albers, A.; Burger, W.; Scovino, R.
2004. Reibung, Schmierung und Verschleiß. Tribologie-Fachtagung, Göttingen 2004, -, Ges. f. Tribologie
Experimentelle Untersuchungen zur Leistungssteigerung von trockenlaufenden Friktionssystemen durch Einsatz von Ingenieurkeramik
Albers, A.; Arslan, A.
2004. Reibung, Schmierung und Verschleiß. Tribologie-Fachtagung, Göttingen 2004, -, Ges. f. Tribologie
Der Einfluss von Oberflächenmodifikationen auf das Systemverhalten am Beispiel eines CVT Getriebes
Albers, A.; Stuffer, A.
2004. Reibung, Schmierung und Verschleiß. Tribologie-Fachtagung, Göttingen 2004, -, Ges. f. Tribologie
Keramische Komponenten in hochbelasteten, trockenlaufenden Friktionssystemen
Albers, A.; Arslan, A.
2004. DKG Jahrestagung, Karlsruhe 2004. Abstract und Vortrag, 66, Deutsche Keram. Ges
Vernetzung von Steuergeräten an Antriebsstrang-Prüfständen
Albers, A.; Kühl, M.; Müller-Glaser, K.; Schyr, C.
2004. Automobiltechnische Zeitschrift, 106 (10), 934–941
Integration von E-Maschinen in einen Pkw-Antriebsstrang mit Parallelstranggetriebe
Albers, A.; Schyr, C.; Neumaier, T.; Götze, T.
2004. Elektrisch-mechanische Antriebssysteme. Tagungsband, Fulda 2004, -, VDE Verlag
Integration von FEM, MKS und Strukturoptimierung zur ganzheitlichen, virtuellen Entwicklung von dynamisch beanspruchten Bauteilen
Minx, J.; Häußler, P.; Albers, A.; Emmrich, D.; Allinger, P.
2004. Seminar: Analyse von Mehrkörpersystemen mit FEM und MKS, Wiesbaden 2004. NAFEMS, -, NAFEMS Contact DACH
Reaktoreinsatz zum parallelen Testen homogener Katalysatoren
Bluhm, M.; Albers, J.; Dinjus, E.; Döring, M.
2004. Chemie Ingenieur Technik, 76, 1672–75. doi:10.1002/cite.200403439
Driver start-up comfort rating of automated clutch systems - an objectification using artificial neural networks
Albers, A.; Albrecht, M.
2004. FISITA 2004 World Automative Congress, Barcelona, Spain, 23 - 27 May 2004. Book of abstracts. Paper No. F2004U108., 325, Sociedad de Técnicos de Automoción
Increasing the performance of motor vehicle clutches by the use of ceramics and the resulting effects on system design
Albers, A.; Arslan, A.
2004. FISITA 2004 World Automative Congress, Barcelona, Spain, 23 - 27 May 2004. Book of abstracts. Paper No. F2004F324., 166, Barcelona
Advanced ceramic as disc material to improve the efficiency of a continously variable transmission (CVT)
Albers, A.; Stuffer, A.
2004. FISITA 2004 World Automative Congress, Barcelona, Spain, 23 - 27 May 2004. Book of abstracts. Paper No. F2004V244., 455, Barcelona
The pair character of working surfaces - significant elements of the contact & channel model C&CM
Albers, A.; Burkhardt, N.; Ohmer, M.
2004. 14th International CIRP Design Seminar, Design in the Global Village, May 16 - 18, 2004, Cairo, Egypt, Cairo
High-pressure effects in homogeneously catalyzed reactions
Albers, J.; Dinjus, E.; Pitter, S.
2004. 42nd European High Pressure Research Group Meeting, Lausanne, CH, September 1-4, 2004 24th German Polish Colloquy on Organometallic Chemistry, Bad Wildbad, September 26-30, 2004
Methodisch unterstützter Entwurf mechanischer Mikrosysteme
Marz, J.; Burkhardt, N.; Albers, A.
2004. Innovative Klein- und Mikroantriebstechnik. ETG-/GMM-Fachtagung, Darmstadt 2004, 63–67, VDE Verlag
Einsatz künstlicher neuronaler Netze zur ojektiven Beurteilung des Schwingungskomforts am Beispiel des automatisierten Anfahrens
Albers, A.; Albrecht, M.
2004. Humanschwingungen. Auswirkungen auf Gesundheit, Leistung, Komfort. Tagung, Darmstadt 2004, 159–182, VDI Verlag
Holistic optimisation of lubricated friction contacts with 4-dimensional load collectives by multi-stage engineering
Albers, A.; Behrendt, M.; Stuffer, A.
2004. Tools and methods of competitive engineering : proceedings of the Fifth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2004, April 13 - 17, 2004, Lausanne, Switzerland. Ed.: I. Horváth, 8 S., Millpress
Design process for high loaded friction systems with advanced ceramics
Albers, A.; Stuffer, A.; Arslan, A.
2004. Design 2004. Proceedings of the 8th International Design Conference, Dubrovnik, Croatia 2004. Ed.: D. Marjanovic, 1181–1188, Dubrovnik
Mechatronik, Aktorik und Sensorik eines humanoiden Roboters
Albers, A.; Burger, W.; Brudniok, S.
2004. Intelligente mechatronische Systeme. 2. Paderborner Workshop 2004. Hrsg.: J. Gausemeier, 145–155, Nixdorf Inst
Die Mechanik eines humanoiden Roboters. Aktueller Stand der Entwicklungsarbeiten = The mechanics of a humanoid Robot - Current state of development
Albers, A.; Brudniok, S.; Burger, W.
2004. Robotik 2004. Leistungsstand, Anwendungen, Visionen, Trends. Tagung München 2004, 353–360, VDI Verlag
Finite element thermal analysis of a ceramic-steel clutch bench test rig
Váradi, K.; Lestyán, Z.; Albers, A.; Arslan, A.
2004. Gépészet 2004, Budapest 2004. (Machine Design). Vol. 2, 607–611
Principles for design on the abstract level of the contact and channel model C&CM
Albers, A.; Burkardt, N.; Ohmer, M.
2004. Tools and methods of competitive engineering : proceedings of the Fifth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2004, April 13 - 17, 2004, Lausanne, Switzerland. Ed.: I. Horváth, 87–94, Millpress
Early detection of failures in sliding bearing by acoustic emission analysis
Scovino, R.; Burger, W.; Fritz, M.; Albers, A.
2004. Tribologie Fachtagung 2004. Hungary Academy of Sciences, Vesprém
Innovationen in Antriebsstrang und Getriebe fordern neue Kupplungssystemlösungen
Albers, A.; Behrendt, M.
2004. Getriebe in Fahrzeugen 2004: Tagung Friedrichshafen, 22. und 23. Juni 2004, 345–367+833, VDI Verlag
Finite element thermal analysis of an alumina ceramic-steel sliding friction system
Lestyán, Z.; Váradi, K.; Albers, A.; Arslan, A.
2004. 8th International Conference on Tribology, 3rd-4th June 2004, 162–167
Verbesserung des Systemverhaltens von trocken laufenden und geschmierten Friktionssystemen durch strukturkeramische Werkstoffe
Albers, A.; Arslan, A.; Stuffer, A.
2004. Technische keramische Werkstoffe. Hrsg.: J. Kriegesmann. Losebl.-Ausg. 81. Erg.-Lfg, Kap. 5.2.8.4, 1–26, Dt. Wirtschaftsdienst
High-pressure effects in the homogeneously catalyzed hydroformylation of olefins
Albers, J.; Dinjus, E.; Pitter, S.; Walter, O.
2004. Journal of Molecular Catalysis A: Chemical, 219, 41–46. doi:10.1016/j.molcata.2004.04.028
Restrictions of production engineering on micro-specific product development
Albers, A.; Marz, J.
2004. Microsystem Technologies, 10 (3), 205–210
Kegelschreiben aus Ingenieurkeramik in stufenlosen Getrieben. Kraftschlussverhalten und Systemdesign
Albers, A.; Stuffer, A.
2004. Tribologie und Schmierungstechnik, 51 (2), 13–16
Der humanoide Roboter als Herausforderung für den Konstrukteur
Albers, A.; Brudniok, S.; Burger, W.
2004. Konstruktion, 56, 62–63
Aktive Dämpfung selbsterregter Reibschwingungen am Beispiel des Kupplungsrupfens
Albers, A.; Krüger, A.
2004. Konstruktion, 56 (5), 71–74 + 81
2003
Augmented Reality am dynamischen Leistungsprüfstand
Albers, A.; Schyr, C.
2003. Augmented & Virtual Reality in der Produktentstehung. Grundlagen, Methoden und Werkzeuge. 2. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, Paderborn, June 4-5, 2003. Ed.: J. Gausemeier, Heinz Nixdorf Insitut
Development of the Entrepreneurship in the Universities
Albers, A.; Meboldt, M.
2003. EUROPEAN DAY OF THE ENTREPRENEUR, Sofia, October 8-9, 2003
Kupplungssysteme im Automobilbau -- Trends, Anforderungen und Lösungen
Albers, A.; Krüger, A.; Behrendt, M.
2003. Kupplungen und Kupplungssysteme in Antrieben 2003 : Erfahrungen, Methoden und Innovationen in Maschinenbau und Fahrzeugtechnik; Tagung Fellbach, 7. und 8. Oktober 2003, 3–30, VDI Verlag
New Approach Using Artificial Neural Networks for Modelling and Evaluation of Man-Machine-Interaction at the Start-Up Process in Passsenger Cars
Albers, A.; Albrecht, M.
2003. Research for Practice : Innovation in Products, Processes and Organisations. 14th International Conference on Engineering Design (ICED), Stockholm, Sweden, August 19th-21st 2003. Ed.: A. Folkeson, The Design Society
Simulation of cardiac electrophysiology using mathematical models and computer based processing of digital image data
Dössel, O.; Reinerth, G.; Seemann, G.; Kewitz, S.; Schmidt, T.; Albers, J.; Vahl, C. F.; Hagl, S.
2003. European Heart Journal, 24 (5, Suppl. 1), 285
4D-Visualisierung der elektrischen Erregungsausbreitung am isoliert schlagenden Schweineherzen
Dössel, O.; Behrens, L.; Reinerth, G.; Albers, J.; Hagl, S.; Vahl, C. F.
2003. Zeitschrift für Herz-, Thorax- und Gefäßchirurgie, 17 (2), 73–83
Produktionstechnische Restriktionen mikrospezifischer Produktentwicklungsprozesse
Albers, A.; Marz, J.
2003. Kolloquium Mikroproduktion, 20.-21. Februar 2003. Hrsg.: J. Hesselbach, 151–159, Vulkan-Verlag
Conceptual design of humanoid robots
Albers, A.; Burkardt, N.
2003. Arbeits- und Ergebnisbericht (2001/2003) - Humanoide Roboter, Lernende und Kooperierende Multimodale Roboter, SFB 588, 4 S., Universität Karlsruhe (TH)
Simulationsunterstützte Auslegung von Antriebsstrang-Prüfständen
Albers, A.; Schyr, C.
2003. Automobiltechnische Zeitschrift, (6)
A new ultramicroelectrode arrays (UMEAs) based sensor for measurement of trace concentrations of heavy metals in water
Xie, X.; Stüben, D.; Berner, Z.; Albers, J.; Hintsche, R.; Jantzen, E.
2003. 6. Tagung des Arbeitskreises Electrochemische Analysenmethoden "ELACH-6", Vienna, 14-17th September 2003, Abstract Volume, V23
Produktionstechnische Restriktion mikrospezifischer Produktentwicklungsprozesse
Albers, A.; Marz, J.
2003. Kolloquium Mikroproduktion : Februar 2003 [eine Kooperation der Sonderforschungsbereiche 440, 499 und 516]. Hrsg.: J. Hesselbach, 151–159, Vulkan-Verlag
Komforteindrücke per Mausklick generieren und messen - Zusammenarbeit von Universität und Industrie auf dem Gebiet der Antriebsstrangforschung
Albers, A.; Albrecht, M.; Knieper, G.
2003. Konstruktion - Zeitschrift für Produktentwicklung, 55 (11/12), 28–29
Virtual Prototyping: Formoptimierung dynamisch beanspruchter Bauteile auf Betriebsfestigkeit
Haeussler, P.; Vieker, D.; Albers, A.
2003. Simulation in der Produkt- und Prozessentwicklung : Symposium, 5. - 7. November 2003, Bremen [Tagungsband]. Hrsg.: A. Burblies, 101–107, Fraunhofer IRB Verlag
Integration der Simulation in die Produktentwicklung - Neue Möglichkeiten zur Steigerung der Qualität und Effizienz in der Produktentwicklung
Albers, A.; Nowicki, L.
2003. Simulation in der Produkt- und Prozessentwicklung : Symposium, 5. - 7. November 2003, Bremen [Tagungsband]. Hrsg.: A. Burblies, 141–147, Fraunhofer IRB Verlag
Neue Ansätze zur Optimierung von Schalenstrukturen
Emmrich, D.; Albers, A.
2003. Simulation in der Produkt- und Prozessentwicklung : Symposium, 5. - 7. November 2003, Bremen [Tagungsband]. Hrsg.: A. Burblies, 179–187, Fraunhofer IRB Verlag
Produktentwicklung - Heute und Morgen
Albers, A.
2003. Konstruktion, 55 (11/12), 3–5
The mechanics of a humanoid
Albers, A.; Brudniok, S.; Burger, W.
2003. Conference documentation : International Conference on Humanoid Robots, HUMANOIDS 2003, October 1 - 3, 2003, Karlsruhe / Munich, Germany, VDI/VDE-GMA
Mechatronische Konzepte zur Verbesserung der Mensch-Maschine-Interaktion
Martin, J.; Keppler, R.; Osswald, D.; Burger, W.; Regenstein, K.; Bretthauer, G.; Wittenburg, J.; Woern, H.; Albers, A.; Berns, K.
2003. HCRS 2002. 1. SFB-Aussprachetag Human Centered Robotic Systems, 5. - 6. Dezember 2002, Universität Karlsruhe (TH) - Tagungsbeiträge, 65–72, Universität Karlsruhe (TH)
Restrictions in the design of gear wheel components and drives for micro technology
Albers, A.; Burkardt, N.; Marz, J.
2003. Microsystem Technologies, 9 (3), 192–196
New approach using artificial neural networks for modelling and evaluation of man-machine-interaction at the start-up process in passenger cars
Albers, A.; Albrecht, M.
2003. Proceedings of the 14th International Conference on Engineering Design (ICED 03), August 19-21, 2003, Stockholm, Sweden, 10 S., Stockholm
Design methodology in micro technology
Albers, A.; Marz, J.; Burkardt, N.
2003. Proceedings of the 14th International Conference on Engineering Design (ICED 03), August 19-21, 2003, Stockholm, Sweden, 10 S., Stockholm
An innovative new basic model in design methodology for analysis and synthesis of technical systems
Albers, A.; Matthiesen, S.; Ohmer, M.
2003. 14th International Conference on Engineering Design (ICED 03), August 19-21, 2003, Stockholm, Sweden, 10 S., Stockholm
Alterations in students’ ability to solve problems by introduction of the element model C&CM into the Karlsruhe education model for industrial product development KaLeP
Albers, A.; Matthiesen, S.; Ohmer, M.
2003. Proceedings of the 14th International Conference on Engineering Design (ICED 03), August 19-21, 2003, Stockholm, Sweden, 10 S., Stockholm
Erfahrungen mit dem neuen Lehrmodell KaLeP an der Universität Karlsruhe (TH)
Albers, A.; Matthiesen, S.; Ohmer, M.
2003. TheoPrax - Magazin für Aus- und Weiterbildung, (1), 49–53
Evaluation of the element model "Working surface pairs & channel and support structures"
Albers, A.; Matthiesen, S.; Ohmer, M.
2003. International CIRP Design Seminar 2003 : Methods and Tools for Co-operative and Integrated Design, 12-14 May 2003, Grenoble, France 2003., Grenoble
Das Karlsruher Lehrmodell für Produktentwicklung KaLeP
Albers, A.; Ohmer, M.
2003. Bildung ist Wissen und Handeln : Tagung, 24. und 25. September 2003; [6. TheoPrax-Tagung], 47–50, Fraunhofer IRB Verlag
Kegelscheiben aus Ingenieurkeramik in stufenlosen Getrieben - Kraftschlussverhalten und Systemdesign
Albers, A.; Stuffer, A.
2003. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen; 44. Tribologie-Fachtagung, 22. bis 24. September 2003 in Göttingen - Bd 2, 67/1–67/7, Gesellschaft für Tribologie e.V. (GfT)
Einsatz von Keramik zur Leistungssteigerung von Kraftfahrzeugkupplungen und die Auswirkung auf die Systemkonstruktion
Albers, A.; Arslan, A.
2003. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen; 44. Tribologie-Fachtagung, 22. bis 24. September 2003 in Göttingen - Bd 2, 70/1–70/10, Gesellschaft für Tribologie e.V. (GfT)
Potenzialabschätzung keramischer Teilbeläge für den Einsatz in trockenlaufenden Kupplungssystemen mittels experimenteller Untersuchungen
Albers, A.; Arslan, A.
2003. Kupplungen und Kupplungssysteme in Antrieben 2003 : Erfahrungen, Methoden und Innovationen in Maschinenbau und Fahrzeugtechnik; Tagung Fellbach, 7. und 8. Oktober 2003, 265–280, VDI Verlag
Ganzheitliche Untersuchungsmethode von friktionskontaktinduzierten Schwingungen in Antrieben
Albers, A.; Ott, S.; Nowicki, L.
2003. Kupplungen und Kupplungssysteme in Antrieben 2003 : Erfahrungen, Methoden und Innovationen in Maschinenbau und Fahrzeugtechnik; Tagung Fellbach, 7. und 8. Oktober 2003, 177–192, VDI Verlag
Gangablösung und Rekuperation mit umschaltbaren Freiläufen durch Drehzahlüberrollung im Parallelstranggetriebe
Albers, A.; Goetze, T.; Eibler, G.
2003. Kupplungen und Kupplungssysteme in Antrieben 2003 : Erfahrungen, Methoden und Innovationen in Maschinenbau und Fahrzeugtechnik; Tagung Fellbach, 7. und 8. Oktober 2003, 339–362, VDI Verlag
Aktive Dämpfung friktionskontaktinduzierter Schwingungen in Antriebssträngen
Albers, A.; Krueger, A.
2003. Kupplungen und Kupplungssysteme in Antrieben 2003 : Erfahrungen, Methoden und Innovationen in Maschinenbau und Fahrzeugtechnik; Tagung Fellbach, 7. und 8. Oktober 2003, 193–209, VDI Verlag
Kupplungssysteme im Automobilbau - Trends, Anforderungen und Lösungen
Albers, A.; Krueger, A.; Behrendt, M.
2003. Kupplungen und Kupplungssysteme in Antrieben 2003 : Erfahrungen, Methoden und Innovationen in Maschinenbau und Fahrzeugtechnik; Tagung Fellbach, 7. und 8. Oktober 2003, 3–30, VDI Verlag
Untersuchungen zum Kraftschlussverhalten stufenloser Getriebe beim Einsatz von Kegelscheiben aus Ingenieurkeramik
Albers, A.; Stuffer, A.
2003. Umschlingungsgetriebe : Ketten oder Riemen?; Innovative Elemente optimal einsetzen; Tagung Fulda, 24. und 25. Juni 2003, 283–292, VDI Verlag
Knowledge-based design environment for primary shaped micro parts
Albers, A.; Marz, J.
2003. Book of abstracts : High aspect ratio micro-structure technology : HARMST 2003, fifth biennial workshop; Monterey Plaza Hotel, Monterey, California, USA, June 15 - 17, 2003, 211–212, Monterey (Calif.)
Augmented Reality am dynamischen Leitungsprüfstand
Albers, A.; Schyr, C.
2003. Augmented & Virtual Reality in der Produktentstehung. Hrsg.: J. Gausemeier, HNI
Parallelstranggetriebe mit alternativen Schaltbaugruppen zur passiven Voreinstellung des jeweiligen Zielgangs
Albers, A.; Goetze, T.; Eibler, G.
2003. Tagungsband / Antriebstechnisches Kolloquium : Aachen, 27.-28. Mai 2003 ;Antriebstechnik in Windenergieanlagen, Simulation und Berechnung, Wälzlagerschmierung und Dichtung, Fahrzeugantriebe. Hrsg.: P.W. Gold, 371–392, Stercken
Methodological investigation of the product development in micro technology
Marz, J.; Burkardt, N.; Albers, A.
2003. Proceedings Vol. 1 / EUSPEN International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and Equipment : May 19th - 20th, 2003, Aachen, Germany. Ed.: M. Weck, 23–26, Rhiem
Investigations on the limitations of the FE-analysis of micro-devices
Albers, A.; Metz, D.
2003. Proceedings of the 4th International Topical Conference, European Society for Precision Engineering and Nanotechnology (euspen), 18.05.- 20.05., 2003, Aachen, Germany, 121–124, Aachen
Leistungssteigerung von Kraftfahrzeugkupplungen durch Einsatz von Keramik und die Auswirkungen auf die Systemkonstruktion
Albers, A.; Arslan, A.
2003. Symposium Keramik im Fahrzeugbau : Stuttgart, 6./7. Mai 2003. Hrsg.: J.G. Heinrich, 47–54, Dt. Keramische Ges
Modellbasierte Überwachung sicherheitskritischer x-by-Wire Systeme am Beispiel eines elektromechanischen Radbremsaktors
Fritz, M.; Albers, A.
2003. Innovative Produktentwicklung : Tagung Fulda, 7. und 8. Mai 2003, VDI Verlag
Fahrsimulation am Antriebsstrang-Prüfstand
Albers, A.; Schyr, C.; Krueger, A.; Pfeiffer, M.
2003. Simulation und Simulatoren : Mobilität virtuell gestalten; Tagung Hamburg, 15. und 16. April 2003, 241–259, VDI Verlag
Modellierung und Simulation bei der Entwicklung von Kraftsensoren für elektromechanische Bremssysteme
Fritz, M.; Albers, A.
2003. Intelligente mechatronische Systeme : Grundlagen, Methoden und Werkzeuge, Adaption und Selbstoptimierung, Mechatronik und Mikrosystemtechnik. Hrsg.: J. Gausemeier, HNI
Heat-exchange during cardiopulmonary bypass
Schmidt, T.; Meyrowitz, G.; Bauer, C.; Naujokat, E.; Albers, J.; Kiencke, U.; Vahl, C.-F.
2003. CARS 2003. Proceedings of Computer Assisted Radiology and Surgery, London 2003. Ed.: H. U. Lemke, 741, Elsevier
Homogen katalysierte Reaktionen unter hohen Drücken. PhD dissertation
Albers, J.
2003. Wissenschaftliche Berichte, FZKA-6874 (Mai 2003) Dissertation, Universität Heidelberg 2003
Mechatronische Konzepte zur Verbesserung der Mensch-Maschine-Interaktion
Martin, J.; Keppler, R.; Osswald, D.; Burger, W.; Regenstein, K.; Bretthauer, G.; Wittenburg, J.; Wörn, H.; Albers, A.; Berns, K.
2003. Human Centered Robotic Systems : 1. SFB-Aussprachetag, Universität Karlsruhe, 5.-6.Dezember 2002 Tagungsbeiträge
High-pressure effects in the rhodium-catalyzes hydroformylation
Albers, J.; Dinjus, E.; Pitter, S.
2003. 13th Internat.Symp.on Homogeneous Catalysis, Tarragona, E, September 3-7, 2002
2002
Ermittlung des dynamischen Übertragungsverhaltens eines Zweimassenschwungrades
Albers, A.; Krüger, A.
2002. Konstruktion, 54 (5), 62–64
Neue Wege mit Bauteilkonstruktionen aus Keramikwerkstoffen
Albers, A.; Stuffer, A.
2002. Vortragsreihe des VDI Arbeitskreis Entwicklung - Konstruktion - Vertrieb, Bezirksverein Karlsruhe, Vortrag im Landesgewerbeamt Karlsruhe, April 2002, Universität Karlsruhe (TH)
Neue Bedienkonzepte an komplexen Antriebsstrangprüfständen
Albers, A.; Pfeiffer, M.; Schyr, C.
2002. Automobiltechnische Zeitschrift, 104 (9)
New education concepts for the training of creative engineers - the Karlsruhe education model for industrial product development - KaLeP
Albers, A.; Burkardt, N.; Matthiesen, S.
2002. Proceedings of the 23rd SEED Annual Design Conference and 8th National Conference on Product Design Education, 12 July, 2001Derby, United Kingdom, 11 S., Derby
Methodik zur Untersuchung des Übertragungsverhaltens von Antriebselementen am Beispiel eines Zweimassenschwungrads für Kraftfahrzeuge
Albers, A.; Krueger, A.
2002. Schwingungen in Antrieben 2001 : Messung, Analyse, Beeinflussung, Überwachung; Tagung Würzburg, 18. und 19. September 2001, 137–149, VDI Verlag
Fehlerkompensation an Dünnschichtsensoren
Dauber, O.; Albers, A.
2002. Reibung, Schmierung und Verschleiß - Bd. 1, 13 S., Göttingen
New methodology for power train development in the automotive engineering - integration of simulation, design and testing
Albers, A.; Albrecht, M.; Krüger, A.; Lux, R.
2002. SAE Automotive & Transportation Technology Congress, October 1-3, 2001, Barcelona, Spain, 239–245, Barcelona
Collaborative environment for concept generation in new products
Albers, A.; Chakravarthy, B. K.; Schweinberger, D.
2002. Proceedings of International Council of Societies of Industrial Design (ICSID) Educational Seminar, October 5-7, 2001, Seongnam City, Korea, 17 S., Seongnam City
Integration of simulation and testing in power train engineering based on the example of the dual mass flywheel
Albers, A.; Albrecht, M.; Krueger, A.; Lux, R.
2002. Testingexpo 2002 Conference, 14-16 May, 2002, Stuttgart, Germany, 25 S., Stuttgart
Computer aided optimization of the static and dynamic properties of parallel kinematics
Weule, H.; Albers, A.; Haberkern, A.; Emmrich, D.; Neithardt, W.
2002. Development methods and application experience of parallel kinematics : the 3rd Chemnitz Parallel Kinematics Seminar, 2002 Parallel Kinematic Machines International Conference, 2nd NCG Application Conference on Parallel Kinematic Machines; April 23 - 25, 2002, 527–546, Verl. Wiss. Scripten
Finite element analysis on the reliability of components of a micro planetary gear
Metz, D.; Albers, A.
2002. Proceedings of the 3rd International Conference european society for precision engineering and nanotechnology, May 26th - 30th, 2002, Eindhoven, The Netherlands, 1CD-Rom, 125–128, Eindhoven
Modelluntersuchungen an hochbeanspruchten, ölgeschmierten Friktionskontakten eines stufenlosen Getriebes
Stuffer, A.; Albers, A.
2002. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen; 23. bis 25. September 2002, Göttingen. Bd. 2, 58/1–58/11, Göttingen
Experimentelle Untersuchung der Potenziale ingenieurkeramischer Werkstoffe für den Einsatz in trockenlaufenden Kupplungssystemen
Arslan, A.; Albers, A.
2002. Reibung, Schmierung und Verschleiß - Tribologie Fachtagung, Göttingen, 25. - 27. September 2000. Bd. 2, 59/1–59/11, Göttingen
Vorhersage subjektiver Komforturteile mittels künstlicher neuronaler Netze = Prediction of subjective comfort ratings by means of artificial neural networks
Albers, A.; Albrecht, M.
2002. Berechnung und Simulation im Fahrzeugbau : Tagung Würzburg, 1. und 2. Oktober 2002, 401–420, VDI Verlag
Entwicklungsmethodik bei Konzeption und Entwurf eines Mikro-Planetengetriebes
Albers, A.; Marz, J.; Burkardt, N.
2002. 47. Internationales Wissenschaftliches Kolloquium, 23-26. September, 2002, Ilmenau, Germany, 12 S., Illmenau
Ceramic as friction material in a continously variable transmission (CVT)
Albers, A.; Stuffer, A.; Ilzhoefer, B.
2002. CVT 2002 Congress : Tagung München, 7./8. Oktober 2002, 107–119, VDI Verlag
Reibungserregte Schwingungen in Kraftfahrzeugkupplungen und ihre aktive Dämpfung
Albers, A.; Krueger, A.
2002. Reibung und Schwingungen in Fahrzeugen, Maschinen und Anlagen : Tagung Hannover, 26. und 27. November 2002, 135–152, VDI Verlag
Automated structural optimization of flexible components using MSC.ADAMS/Flex and MSC.Nastran Sol200
Emmrich, D.; Haeussler, P.; Albers, A.
2002. 1st European MSC.ADAMS User Conference, November 13-14, 2002, London, United Kingdom, 13 S., London
Mehrgrößenregelungssysteme für die extrakorporale Zirkulation
Meyrowitz, G.; Schmidt, T.; Naujokat, E.; Albers, J.; Kiencke, U.; Vahl, C. F.; Hagl, S.
2002. Biomedizinische Technik, 47 (1), 915–918
Gezielte Problemlösung bei der Produktentwicklung mit Hilfe der SPALTEN-Methode
Albers, A.; Saak, M.; Burkardt, N.
2002. 47. Internationales Wissenschaftliches Kolloquium, Ilmenau, Germany, 23-26. September 2002, Alb-02, TU
2001
Untersuchungen an ungeschmierten Keramik/Metall - Gleitpaarungen im einsinnigen Gleitkontakt im Hinblick auf Anwendungen in Friktionssystemen
Schneider, J.; Zum Gahr, K.-H.; Arslan, A.; Albers, A.
2001. Tribologie Fachtagung, Reibung, Schmierung und Verschleiß, Göttingen, 24. - 26. September, 2001, 57, Gesellschaft für Tribologie e.V. (GfT)
Shape optimisation based on liftime prediction measures
Ilzhöfer, B.; Müller, O.; Häußler, P.; Albers, A.; Allinger, P.
2001. International Conference on Engineering Design, ICED 2001 , Glasgow, UK, August 21-23, 2001
Fehlerkompensation beim Einsatz von Dünnschichtsensoren im elastohydrodynamischen Kontakt
Dauber, O.; Albers, A.
2001. Tribologie-Fachtagung 2001: Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen, Göttingen, 24.-26. September 2001, Gesellschaft für Tribologie e.V. (GfT)
Prüfen von Antriebssträngen am Beispiel des Kupplungsrupfens - Ganzheitliche Antriebsstrangentwicklung
Albers, A.; Krüger, A.; Lux, R.; Albrecht, M.
2001. Automobiltechnische Zeitschrift, 103 (1), 44–45
Ölnebelbildung in Gleitlagern - Experimentelle Untersuchungen
Albers, A.; Burger, W.; Fritz, M.; Scovino, R.
2001. Tribologie Fachtagung 2001, Treibung, Schmierung und Verschleiß, Forschung und praktische Anwendungen, Göttingen, 24. - 26. September, 2001, Gesellschaft für Tribologie e.V. (GfT)
Maßnahmen zur Begrenzung der latenten Betriebsgefahr von großen Dieselmotoren - Teil 2
Albers, A.; Burger, W.; Dürr, M.; Fritz, M.; Groth; Schaller, W.
2001. Motortechnische Zeitschrift, 62 (12), 1010–1020
Herausforderung und Grenzen - Methodik in der praktischen Produktentwicklung
Albers, A.
2001. Vom Markt zum Produkt (Abschlusstagung) : Impulse für die Innovationen von morgen. Hrsg.: D. Spath, LOG-X
CAE-unterstützte Strukturoptimierung und industrielle Anwendung aus dem Umfeld des Fahrzeugbaus
Sauter, J.; Müller, O.; Albers, A.
2001. Seminar im "Haus der Technik", 25.-26.1.2001, München, Germany, München
Maßnahmen zur Begrenzung der latenten Betriebsgefahr von großen Dieselmotoren - Teil 2
Schaller, W.; Dürr, M.; Albers, A.; Burger, W.; Fritz, M.; Groth, K.
2001. Motortechnische Zeitschrift (MTZ), 62 (12), 1010–1020
Universalprüfstand für Kfz-Antriebsstränge
Albers, A.; Lux, R.
2001. Automotive Engineering Partners, 1, 26–29
Rechnergestützte Auslegungswerkzeuge für keramische Bauteile
Ilzhoefer, B.; Rathgeber, T.; Albers, A.
2001. Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe : Statuskolloquium DFG-Sonderforschungsbereich 483, Karlsruhe, 22. Jan. 2002. Hrsg.: K.-H. Zum Gahr, 127–138, Univerl
Trockenkupplung mit keramischen Reibelementen
Arslan, A.; Albers, A.
2001. Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe : Statuskolloquium DFG-Sonderforschungsbereich 483, Karlsruhe, 22. Jan. 2002. Hrsg.: K.-H. Zum Gahr, 143–152, Universität Karlsruhe (TH)
CVT-Getriebe mit keramischen Variatorscheiben
Stuffer, A.; Albers, A.
2001. Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe : Statuskolloquium DFG-Sonderforschungsbereich 483, Karlsruhe, 22. Jan. 2002. Hrsg.: K.-H. Zum Gahr, 93–103, Universität Karlsruhe (TH)
Shape optimisation based on lifetime prediction measures
Ilzhoefer, B.; Mueller, O.; Haeussler, P.; Albers, A.; Allinger, P.
2001. International Conference on Engineering Design, ICED, August 21-23, 2001, Glasgow, United Kingdom, 8 S., Glasgow
Investigations on the reliability of FEA calculations on the microscopic scale
Froehlich, A.; Weyer, S.; Metz, D.; Mueller, O.; Brueckner-Foit, A.; Albers, A.
2001. Technical Proceedings of the 2001 International Conference on Computational Nanoscience, March 19-21, 2001, Hilton Head Island, South Carolina, USA, 4 S., Hilton Head Island
Silizium zur Wasserstofferzeugung als Langzeitspeicher für regenerative Energie
Albers, A.; Herbst, D.
2001. Fortschrittliche Energiewandlung und -anwendung : Schwerpunkt: dezentrale Energiesysteme ; Tagung Bochum, 13. und 14. März 2001, 479–488, VDI Verlag
Mechanisch-elektrisches Anfahr- und Schaltgetriebe für Hybridfahrzeuge
Albers, A.; Herbst, D.
2001. Getriebe in Fahrzeugen 2001 : Tagung Friedrichshafen, 19. und 20. Juni 2001, 347–361, VDI Verlag
Hydrogen from silicon for polymer electrolyte fuel cells in mobile systems
Herbst, D.; Albers, A.
2001. PEFC : proceedings - 1st European PEFC Forum, 2 - 6 July 2001, Lucerne, Switzerland. Ed.: F. N. Büchi, 397–406, European Fuel Cell Forum
Methodik in der praktischen Produktentwicklung - Herausforderung und Grenzen
Albers, A.; Schweinberger, D.
2001. Vom Markt zum Produkt - Impulse für die Innovationen von morgen. Hrsg.: D. Spath, 25–34, LOG_X-Verl
Automated topology optimization of flexible components in hybrid finite element multibody systems using ADAMS/Flex and MSC.Construct
Haeussler, P.; Emmrich, D.; Mueller, O.; Ilzhoefer, B.; Nowicki, L.; Albers, A.
2001. ADAMS European User’s Conference, 14th-15th November, 2001, Berchtesgaden, Germany, 16 S., Berchtesgaden
Ölnebelbildung in Gleitlagern - Experimentelle Untersuchungen
Fritz, M.; Burger, W.; Scovino, R.; Albers, A.
2001. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen; 24. bis 26. September 2001 in Göttingen - Bd. 2, 9 S., Göttingen
Schadensfrüherkennung an geschmierten Kontakten mittels Schallemissionsanalyse
Fritz, M.; Burger, W.; Albers, A.
2001. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen; 24. bis 26. September 2001 in Göttingen - Bd. 1, 9 S., Göttingen
Restrictions in the design of gear wheel components and drives for micro technology
Albers, A.; Marz, J.
2001. Book of abstracts of the 4th International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST), June 17-19, 2001, Baden-Baden, Germany, 257–258, Baden-Baden
Keramik für den Einsatz in Bremsen und Kupplungen
Albers, A.; Arslan, A.; Herbst, D.
2001. Automobiltechnische Zeitschrift, 103 (5), 414–419
Keramik als Friktionswerkstoff im CVT-Getriebe
Albers, A.; Stuffer, A.; Zum Gahr, K.-H.; Hwang, D.-H.
2001. Innovative Produkte durch neue Werkstoffe : interaktive Entwicklung von Material, Fertigung und Erzeugnis; Tagung Würzburg, 18. und 19. Oktober 2001, 199–211, VDI Verlag
Untersuchungen an ungeschmierten Keramik/Metall-Gleitpaarungen im einsinnigen Gleitkontakt im Hinblick auf Anwendungen in Friktionssystemen
Schneider, J.; Zum Gahr, K.-H.; Arslan, A.; Albers, A.
2001. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen; 24. bis 26. September 2001 in Göttingen - Bd. 2, 57/1–57/10, Göttingen
Modelluntersuchungen an hochbeanspruchten, ölgeschmierten Friktionskontakten zur Drehmomentübertragung
Stuffer, A.; Albers, A.; Hwang, D.-H.; Zum Gahr, K.-H.
2001. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen; 24. bis 26. September 2001 in Göttingen - Bd. 2., 69/1–69/9, Göttingen
Erarbeitung eines Toleranzkonzeptes und Implementierung in ein Mikro-Planetengetriebe
Albers, A.; Burkardt, N.; Marz, J.; Ohmer, M.
2001. Konstruktion - Zeitschrift für Produktentwicklung, 53 (11/12), 38–41
Detection sensitivity of cantilevers for atomic force microscopy under combined normal and lateral load using parameterized finite element model
Müller, M.; Schimmel, T.; Fettig, H.; Häussler, P.; Müller, O.; Albers, A.
2001. 65.Physikertagung gemeinsam mit der Frühjahrstagung des Arbeitskreises Festkörperphysik der DPG, Hamburg, 26.-30. März 2001 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, Bd.36 (2001) O 25.58
2000
Industrial Product Development in Academic Education - Experiences with the Karlsruhe Model = Industrielle Produktentwicklung in der akademischen Ausbildung - Erfahrungen mit dem Karlsruher Modell
Albers, A.; Burkardt, N.
2000. 10. Nationale wiss. techn. Jubiläumskonferenz mit internationaler Beteiligung, Inst. f. Automatisierung der diskreten Fertigung Technische Universität Sofia, Sosopol, Bulgaria, 1. - 3. Juni, 2000
NON-contact electrical mapping during four dimensional computed tomography imaging in a Langendorff model
Dössel, D.; Kewitz, S.; Albers, J.; Bahner, M. L.; Weretka, S.; Sachse, S.; Vahl, C.; Hagl, S.
2000. European Heart Journal, 21, 177
The "Karlsruhe model" - a successful approach to an academic education in industrial product development
Albers, A.; Burkardt, N.; Matthiesen, S.; Schweinberger, D.
2000. 3rd Workshop on Global Engineering Education - GEE’ 3, 18. - 20. Oktober, 200, Aachen, Germany, 8 S., Aachen
Dünnschichtsensoren zur Untersuchung elastohydrodynamischer Kontakte - Elektrische Eigenschaften
Dauber, O.; Albers, A.
2000. Jahresbericht / IKM, Institut für Keramik im Maschinenbau, Universität Karlsruhe, 1998/99, 125–129
Cooperative innovation engineering
Schweinberger, D.; Albers, A.
2000. Mobilität und Telekommunikation - Motoren der europäischen Integration = Mobilitá e telecomunicazioni - motori dell’integrazione europea / III. Deutsch-Italienisches Kolloquium für die Wissenschaft, Karlsruhe, 7. - 9. Dezember 2000, 20–27, Universität Karlsruhe (TH)
Neue Modelle für die Ingenieurausbildung - ein Karlsruher Lehrmodell
Albers, A.; Matthiesen, S.
2000. Die Technische Universität an der Schwelle zum 21. Jahrhundert. Hrsg.: H. Kunle, 341–349, Springer Verlag
Dünnschichtsensoren zur Untersuchung elastohydrodynamischer Kontakte - Mechanische Eigenschaften
Dauber, O.; Albers, A.
2000. Jahresbericht / IKM, Institut für Keramik im Maschinenbau, Universität Karlsruhe, 1998/99, 120–124
Untersuchung elastohydrodynamischer Linienkontakte zwischen Wälzlagerstahl und Strukturkeramik
Dauber, O.; Albers, A.
2000. Jahresbericht / IKM, Institut für Keramik im Maschinenbau, Universität Karlsruhe, 198/99, 115–119
Dynamiksimulation komplettiert Prüfstands- und Fahrversuche
Lux, R.; Krueger, A.; Albers, A.
2000. Simulation im Maschinenbau : Softwaretools und Anwendungen in Lehre, Forschung und Praxis; Dresdner Tagung (SIM 2000), 24. und 25. Februar, 2000 - Bd. 1, Eigenverl
Neue Lehrmodelle zur Ausbildung kreativer Konstrukteure - Das Karlsruher Lehrmodell für Produktentwicklung
Albers, A.; Matthiesen, S.
2000. VDI-Tagungsband - 4. Deutscher Konstrukteurstag, 6./7. September, 2000, Bochum, Germany, 25 S., Bochum
The "Karlsruhe model" - a successful approach to an academic education in industrial product development
Albers, A.; Burkardt, N.; Matthiesen, S.; Schweinberger, D.
2000. Engineering & Product Design Education Conference, 5./6. September, 2000, Brighton, UK, 8 S., Brighton
Analysis of combined bending and torsion of AFM-cantilevers using a parameterized finite element model
Mueller, M.; Schimmel, T.; Fettig, H.; Haeussler, P.; Mueller, O.; Albers, A.
2000. NATO-Tagung "Fundamentals of and Bridging the Gap Between Macro- and Micro/Nanoscale Tribology", 13.-25. August, 2000, Keszthely, Ungarn, Keszthely
Simulating the detection process of AFM-cantilevers using true displacement distributions under loading
Mueller, M.; Schimmel, T.; Haeussler, P.; Mueller, O.; Fettig, H.; Albers, A.
2000. 4th International Conference on the Development and Technological Application of Scanning Probe Method, 25.-27. September, 2000, Münster, Germany, Münster
Schwingungen in Reibkupplungen - Ursachen, Auswirkungen, Abhilfen
Albers, A.; Herbst, D.
2000. Dynamik von Fahrzeug und Fahrweg : Tagung Kassel, 5. und 6. Oktober 2000, 273–295, VDI Verlag
1999
Multidisciplinary shape and topology optimization and its integration in the product development process for the effective development of competetive products
Müller; Albers, A.; Ilzhöfer; Häußler
1999. 12th International Conference on Engineering Design (ICED ’99), München, Germany, 655–661, TU München
Innovation für morgen durch kundenorientierte, kreative und termingerechte E&K-Prozesse - Innovationsstrategie für neue Produktideen
Albers, A.
1999. Konstruktionsleiterlehrgang beim Wirtschaftsverband Industrieller Unternehmen Baden e.V.(wvib)
Proficient Designers - A Challenge to Academical Education
Albers, A.; Burkardt, N.
1999. 12th International Conference on Engineering Design, ICED 99, Munich, August 24. - 26., 1999, Technische Universität München (TUM)
Von der Idee zum optimalen Bauteil
Albers, A.; Sauter, J.; Mueller, O.
1999. Seminarunterlagen - Seminar im "Haus der Technik", 18.-19. Februar, 1999, Essen, Germany, Essen
Robot assisted craniofacial surgery: first clinical evaluation
Burghart, C.; Krempien, R.; Redlich, T.; Pernozzoli, A.; Grabowski, H.; Muenchenberg, J.; Albers, J.; Hassfeld, S.; Vahl, C.; Rembold, U.; Woern, H.
1999. In: Proceedings. Computer Aided Radiology and Surgery, Paris 1999. S. 828-833
Multidisciplinary shape and topology optimization and its integration in the product development process for the effective development of competitive products
Mueller, O.; Albers, A.; Ilzhoefer, B.; Haeussler, P.
1999. Communication and cooperation of practice and science ; proceedings of the 12. International Conference on Engineering Design - Vol. 2. Ed.: U. Lindemann, 655–660, Techn. Univ
Topology optimization of large real world structures
Mueller, O.; Albers, A.; Allinger, P.; Sauter, J.
1999. Effective engineering analysis : NAFEMS World Congress’99, organised by NAFEMS at the Newport Marriott Hotel, Rhode Island, USA, 25 - 28 April 1999 - Vol. 2., 827–839, NAFEMS
Teaching machine elements at universities - towards internationally harmonised concepts in view of industrial needs
Albers, A.; Birkhofer, H.
1999. Communication and cooperation of practice and science ; proceedings of the 12. International Conference on Engineering Design - Vol. 2. Ed.: U. Lindemann, 1043–1046, Techn. Univ
The process chain "from market to product" - a concrete instrument for product innovation
Albers, A.; Schweinberger, D.
1999. Communication and cooperation of practice and science ; 12. International Conference on Engineering Design (ICED) - Munich, Germany, August 24-26, 1999. Vol. 2. Ed.: U. Lindemann, 1151–1154, Techn. Univ
Proficient designers - a challenge to academical education
Albers, A.; Burkardt, N.
1999. Communication and cooperation of practice and science ; proceedings of the 12. International Conference on Engineering Design - Vol. 2. Ed.: U. Lindemann, 1287–1290, Techn. Univ
Neuartiger, universell einsetzbarer Antriebsbaugruppen-Prüfstand
Lux, R.; Burger, W.; Albers, A.
1999. Meß- und Versuchstechnik im Fahrzeugbau : Kongreß Mainz, 29. und 30. April 1999, 19 S., VDI Verlag
Neue Ansätze in der Maschinenkonstruktionslehre
Albers, A.; Birkhofer, H.; Matthiesen, S.
1999. Professor Dr.-Ing. E.h. Dr.-Ing. Wolfgang Beitz zum Gedenken : sein Wirken und Schaffen. Hrsg.: G. Pahl, 167–183, Springer Verlag
Maschinenbau im Informationszeitalter - Das Karlsruher Lehrmodell
Albers, A.; Matthiesen, S.
1999. Maschinenbau im Informationszeitalter : 44. Internationales Wissenschaftliches Kolloquium, 20. - 23.09.1999 - Bd. 3. Hrsg.: W. Gens, 568–575, Techn. Univ
Automated coupling of MDI/ADAMS and MSC.CONSTRUCT for the topology and shape optimization of flexible mechanical systems
Mueller, O.; Haeussler, P.; Lux, R.; Ilzhoefer, B.; Albers, A.
1999. Proceedings of the 1999 International ADAMS Users’ Conference : November 17 - 18 in Berlin, 12 Cd-Rom, 14 S., Mechanical Dynamics GmbH
Driveline torsion / vibration control
Albers, A.
1999. Ford NVH-Course - Ford-Entwicklungszentrum Köln, Ford-Werke Köln, 18th November, 1999, Germany, Köln
Innovation für morgen durch kundenorientierte, kreative und termingerechte E&K-Prozesse - Innovationsstrategie für neue Produktideen
Albers, A.
1999. Tagungsband zum Konstruktionsleiterlehrgang beim Wirtschaftsverband Industrieller Unternehmen Baden e.V. (wvib), 16./23. April 1999, Freiburg, Germany, Freiburg
Die homogen katalysierte Cooligomerisierung von 1,3-Butadien und Kohlendioxid. Eine reaktionskinetisch und mechanistisch vollständig aufgeklärte Katalyse?
Haack, V.; Gassner, F.; Walter, O.; Albers, J.; Dinjus, E.
1999. 32.Jahrestreffen der deutschen Katalytiker, Friedrichsroda, 17.-19.März 1999
Hochdruck in der homogenen Katalyse. Ein Weg zur Steigerung der Reaktivität von CO₂
Gassner, F.; Albers, J.; Haack, V.; Janssen, A.; Dinjus, E.
1999. 32.Jahrestreffen der deutschen Katalytiker, Friedrichsroda, 17.-19.März 1999
1998
06. LuK Kolloquium 1998
Kimmig, K.-L.; Albers, A.
1998
Lichtenthaler Protokolle - Modelle für die Maschinenelemente - Lehre
Albers, A.; Birkhofer, H.
1998. Baden-Baden, Universität Karlsruhe/TH Darmstadt, 9. -10. February, 1998
Von der Idee zum Prototypen - 3D-CAD in der Praxis
Albers, A.; Husemann, R. M.; Paspirgilis, B. E.
1998. Unterlagen zum Seminar im "Haus der Technik", 5.-6.Mai 1998, Essen, Germany, Essen
Innovationsmanagement für mittelständische Betriebe
Albers, A.
1998. Tagungsband : Entwicklungs- und Konstruktionsleiter-Lehrgang "Innovation für Morgen" beim Wirtschaftsverb. Ind. Unternehmen Baden e.V., 1997, Freiburg, Germany, Freiburg
Das Getriebe als Kennungswandler im Antriebsstrang
Albers, A.
1998. Beitrag zur Fachveranstaltung "Fahrzeuggetriebe - Grundlagen und neue Konzepte zur Komfortsteigerung und Verbrauchsreduktion", 10.-11. Dezember 1998, Haus der Technik, Essen, Germany, Essen
Torsional damper design
Albers, A.
1998. Ford NVH-Course - Ford-Entwicklungszentrum Köln, Ford-Werke Köln, 8th April and 10th November 1997, Germany, Köln
Überwachung von Gleitlagern im Betrieb mit Hilfe der Messung des elektrischen Widerstands der Schmierölschicht - Neue Aspekte
Burger, W.; Haller, R.; Albers, A.
1998. Sensoren und Meßtechnik: Vorträge der ITG-Fachtagung, 9.-11. März 1998, Bad Nauheim, 449–452, VDE Verlag
Effektives Kooperationsmanagement in der Produktentwicklung
Albers, A.; Schweinberger, D.
1998. Veröffentlichung zur Fachkonferenz "Zukunft Konstruktion", 23. und 24.September, 1998, Düsseldorf, Germany [Proceedings], 34 S., IIR
Neue Ausbildungsmodelle für die Maschinenkonstruktionsausbildung an der Universität
Albers, A.; Birkhofer, H.
1998. Jahrestagung der WGMK 1998, 28.-29.9.1998, Universität Stuttgart, Germany, Stuttgart
Experience with the new education model "Integrated Product Development" at the University of Karlsruhe
Albers, A.; Burkardt, N.
1998. Proceedings of the 4th International Symposium on Product Development in Engineering Education’98, 10-11 December, Lohmar, Germany, 17 S., Lohmar
Rupfen - Ursachen und Abhilfen
Albers, A.; Herbst, D.
1998. LuK for the best connection in comfort and economy - 6. LuK-Kolloquium, 19./20.03.1998, 23–46, LuK
Kupplungsrupfen - Ursachen, Modellbildung und Gegenmaßnahmen
Albers, A.; Herbst, D.
1998. Schwingungen in Antrieben ’98 : Tagung Frankenthal 10./11. Sept. 1998, 327–360, VDI Verlag
Was bringt die Zukunft? Trends in der Automatisierung von KFZ-Antriebssträngen
Albers, A.; Matthiesen, S.
1998. Getriebe in Fahrzeugen ’98 : Tagung Friedrichshafen, 16. und 17. Juni 1998, 133–158, VDI Verlag
Das Getriebe als Kennungswandler im Gesamtantriebsstrang - Torsionsschwingungen und NVH
Albers, A.
1998. Fahrzeuggetriebe - Grundlagen und neue Konzepte zur Komfortsteigerung und Verbrauchsreduktion, 10.-11. Dezember 1998, Essen, Germany, Essen
Driveline dynamics
Albers, A.
1998. Ford NVH-Course - Ford-Entwicklungszentrum Köln, Ford-Werke Köln, 4th November 1998, Germany, Köln
New concepts teaching machine elements at the university
Albers, A.; Birkhofer, H.
1998. Proceedings of the 4th International Symposium on Product Development in Engineering Education’98, 10-11 December, Lohmar, Germany, Lohmar
Innovation für morgen durch kundenorientierte, kreative und termingerechte E&K-Prozesse. Innovationsstrategie für neue Produktideen
Albers, A.
1998. Tagungsband zum Konstruktionsleiterlehrgangs beim Wirtschaftsverband Industrieller Unternehmen Baden e.V.(wvib), 12. Februar 1998, Freiburg, Germany, Freiburg
1997
Zum Verständnis der Reibsysteme in trockenlaufenden Bremsen und Kupplungen Trennprobleme bei Trockenkupplungen Organisch gebundene Kupplungsbeläge Möglichkeiten und Grenzen
Severin, D.; Albers, A.; Elison, H. D.; Bergheim, M.
1997. Kupplungen in Antriebssystemen ’97: Problemlösungen, Erfahrungen, Trends: Tagung Fulda, 3.-4. März 1997, 43–63, VDI Verlag
Entwicklungstrends in der Automatisierung von Kraftfahrzeuggetrieben
Albers, A.; Seuge
1997. Systematische Meinungsumfrage bei den führenden Automobil- und Getriebeherstellern, Entwicklungsbericht des Instituts für Maschinenkonstruktionslehre, vertraulich, Universität Karlsruhe (TH)
Dynamics of drive-trains
Albers, A.
1997. MSC-Course "Advanced Automotive Engineering", Loughborough, Great Britain, Loughborough
A mathematical high time resolution model of the arterial system under extracorporeal circulation
Schulz, S.; Bauernschmitt, R.; Albers, J.; Riesenberg, A.; Schwarzhaupt, A.; Vahl, C. F.; Kiencke, U.
1997. In: 34th ISA Biomedical Sciences Instrumentation, Dayton, Ohio 1997. S. 406-411
Die Zukunft der Maschinenelemente-Lehre
Albers, A.; Birkhofer, H.
1997. Workshop "Die Zukunft der Maschinenelemente-Lehre" - Heiligenberger Manifest, Vorträge, Workshop-Ergebnisse, April 23-24,1997, Karlsruhe und Darmstadt
Trennprobleme bei Trockenkupplungen. Auftreten - Ursachen - Maßnahmen
Albers, A.; Elison, H. D.
1997. Kupplungen in Antriebssystemen ’97 : Problemlösungen, Erfahrungen, Trends; Tagung Fulda, 3./4. März 1997, 63–81, VDI Verlag
1996
Wohin steuert die Maschinenkonstruktionslehre?
Albers, A.
1996. Jahrestagung der WGMK 1996, Universität Karlsruhe (TH), Universität Karlsruhe (TH)
1995
Selbsteinstellende Kupplung (SAC) und Zweimassenschwungrad (ZMS) zur Verbesserung des Antriebsstrangkomforts
Albers, A.
1995. Getriebe in Fahrzeugen ’95 : Tagung Friedrichshafen, 26 und 27. April 1995, 153–168, VDI Verlag
1994
Formoptimierung in der Kfz-Zulieferindustrie - Anforderungen, Auswahl und Einsatz
Kasper, K.; Albers, A.
1994. XXIII. Internationaler FEM-Kongress 1994, Baden-Baden, 14. - 15. November, 1994, 101–114
Parameterfreie Formoptimierung von Bauteilen, Erfahrungen im industriellen Einsatz
Kasper, K.; Friedrich, M.; Sauter, J.; Albers, A.
1994. Infografik, (2)
Simultaneous Engineering, Projektmanagement und Konstruktionsmethodik - Werkzeuge zur Effizienzsteigerung
Albers, A.
1994. Deutscher Konstrukteurtag - Entwicklung und Konstruktion im Strukturwandel, Fulda, Germany, 6.-7. Juni 1994, 73–106, VDI Verlag
Fortschritte beim ZMS - Geräuschkomfort für moderne Kraftfahrzeuge
Albers, A.
1994. Comfort and economy ; LuK drive train systems ; LuK 5. Kolloquium, 27. Mai 1994, 5–41, LuK
Weiterentwicklungen beim ZMS - Geräuschkomfort für moderne Kraftfahrzeuge
Albers, A.
1994. 5. Internationales Kolloquium Torsionsschwingungen im Antriebsstrang, Baden Baden, 27. Mai 1994
Parameterfreie Formoptimierung von Bauteilen, Erfahrungen im industriellen Einsatz
Kasper, K.; Friedrich, M.; Sauter, J.; Albers, A.
1994. Infografik, 2 (Sonderdruck), 3 S
Simultaneous Engineering, Projektmanagement und Konstruktionsmethodik - Werkzeuge zur Effizienzsteigerung
Albers, A.
1994. Vortrag auf dem deutschen Konstrukteurstag ’94, 6./7. Juni 1994, Fulda, Germany, VDI Verlag
Formoptimierung in der Kfz-Zulieferindustrie - Anforderungen, Auswahl und Einsatz
Kasper, K.; Albers, A.
1994. XXIII. Internationaler FEM-Kongress, 14./15. November, 1994, Baden-Baden, Germany, Baden-Baden
1993
Drehmomentmeßung Gelenkwelle Opel CORSA
Albers, A.; Langeneckert, H.
1993. LUK Aktennotiz, 1993
Confort acoustique des vehicules par l’utilisation d’un volant bimasse ou d’un DFC. Journees d’etude "progres recents en environnement et confort acoustiques des vehicules"
Albers, A.
1993. 2eme Section Technique de la Societe des Ingenieurs de l’Automobile S.I.A., 21. et 22. Janvier 1993, Paris, France, Paris
Simultaneous Engineering an einem Beispiel aus der Kraftfahrzeugzulieferindustrie
Albers, A.
1993. Total quality management, Simultaneous engineering, Lean development : Wege aus der Rezession; Führungskräfte-Treffen, München, 17.-18. Juni 1993, 5.1–5.27, VDI Verlag
1992
Torsional damper design
Albers, A.
1992. Lecture to the Ford NVH-Course - Ford-Entwicklungszentrum Köln, 8th - 11th November 1992, Köln, Germany, Köln
Das Schwingungsverhalten von Fahrzeugantriebssträngen
Albers, A.
1992. Vortrag auf den NVH- Training Kursen Level II, 14. Mai 1992 und 23. September 1992, Bildungszentrum der Ford-Werke, Köln, Germany, Köln
1991
Das Zweimassenschwungrad der dritten Generation zur Optimierung der Komforteigenschaften von PKW-Antriebssträngen - Modellbildung - Auslegung - Wirkung im Gesamttriebstrang
Albers, A.
1991. Maschinen- und Anlagenüberwachung, Komponenten der Antriebstechnik im System, Neu- und Weiterentwicklungen - Antriebstechnisches Kolloquium, Aachen, 1991, 245–268, Verl. TÜV Rheinland
Torsional Vibrations in Drive-Trains
Albers, A.
1991. Lecture to the Ford NVH-Course, 7th. Nov.1991, Burleigh Court, Loughborough University of Technology, Loughborough
1990
Torque Control Isolation (TCI) The Smart Clutch
Albers, A.
1990. Torsional Vibrations in the Drive Train - 4. International Symposium, Baden-Baden, Germany, April 20, 1990, 81–107, LuK
Elektronisches Kupplungsmanagement (EKM) - Die mitdenkende Kupplung
Albers, A.
1990. Torsionsschwingungen im Antriebsstrang : 4. Internationales Kolloquium am 20. April 1990 in Baden-Baden, 77–101, LuK
1987
Photoemission investigation of the high temperature superconductors La₂₋ₓSrₓCuO₄
Steiner, P.; Albers, J.; Kinsinger, V.; Sander, I.; Siegwart, B.; Huefner, S.; Politis, C.
1987. Zeitschrift für Physik B - Condensed Matter, 66, 275–78
1986
Modelling of the thermomechanical behaviour of salt rock
Albers, G.; Graefe, V.; Korthaus, E.; Pudewills, A.; Prij, J.; Wallner, M.
1986. Simon, R. [Hrsg.] Radioactive Waste Management and Disposal : Proc. of the 2nd European Community Conf., Luxembourg, L, April 22-26, 1985 Cambridge : Cambridge Univ.Pr., 1986. -
Modelling of the thermomechanical behaviour of salt rock
Albers, G.; Graefe, V.; Korthaus, E.; Pudewills, A.; Prij, J.; Wallner, M.
1986. Simon, R. [Hrsg.] Radioactive Waste Management and Disposal : Proc. of the 2nd European Community Conf., Luxembourg, L, April 22-26, 1985 Cambridge : Cambridge Univ.Pr., 1986. -, 450–67
1984
Zur Abschaetzung der thermomechanischen Auswirkungen von hochradioaktiven Abfaellen
Albers, G.; Biurrun, E.; Korthaus, E.; Pudewills, A.
1984. Atomwirtschaft - Atomtechnik, 29, 559–61

Publications

An overview of the publications can be found on ResearchGate  and GoogleScholar