Topology Optimization for the Design of a Heat Sink in an Inductive Electrically Excited Synchronous Machine
Knecht, S.; Albers, A.; Baehr, A.; Parspour, N.; Ahlborn, H.; Middendorf, P.
2025. Proceedings of the ASMO UK13-EU2 / ISSMO conference. Ed.: I. Lepot, 96–103, University of Leeds

Design of a variable passive ejector for hydrogen recirculation of a PEM fuel cell system
Seth, B.; Knecht, S.; Szalai, M.; Haußmann, J.
2025. International Journal of Hydrogen Energy, 99, 956–965. doi:10.1016/j.ijhydene.2024.12.091

Structural Investigation of an Additively Manufactured Stator of a Transverse Flux Machine
Knecht, S.; Schmid, M.; Reisch, I.; Parspour, N.; Albers, A.
2024. ASME 2024 International Mechanical Engineering Congress and Exposition, November 17–21, 2024, Portland, Oregon, USA,: Volume 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging, The American Society of Mechanical Engineers (ASME). doi:10.1115/IMECE2024-144893

Highly Integrated Wireless Power Transfer System for an Inductive Electrically Excited Synchronous Machine
Baehr, A.; Ahlborn, H.; Knecht, S.; Parspour, N.
2024. 2024 IEEE Wireless Power Technology Conference and Expo (WPTCE), IEEE Wireless Power Technology Conference and Expo (2024), Kyōto, Japan, 08.05.2024–11.05.2024, 64–68, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/WPTCE59894.2024.10557297

Thermally optimized designs for electro-hydrostatic actuators using surrogate models and topology optimization
Knecht, S.; Albers, A.
2024. AIAA SCITECH 2024 Forum, American Institute of Aeronautics and Astronautics. doi:10.2514/6.2024-0479

Developing a Thermal Design Optimization Method Based on the Model of SGE – System Generation Engineering
Knecht, S.; Schlegel, M.; Kempf, C.; Albers, A.
2024. Proceedings of NordDesign 2024, Reykjavik, Iceland, 12th - 14th August 2024, 811–821, The Design Society. doi:10.35199/NORDDESIGN2024.86

Supporting the Application-Oriented Development of Components for Fuel Cell Drive Systems by the IPEK X-in-the-loop approach
Haußmann, J.; Knaier, J.; Seth, B.; Knecht, S.; Bause, K.; Ott, S.
2023. International Symposium on Development Methodology ; 10 (Wiesbaden) : 2023.11.07-08, AVL Deutschland

Optimization potentials of the transverse flux machine over the product life cycle
Schmid, M.; Schurr, J.; Brandl, L.; Sauerwald, R.; Knecht, S.; Nöller, M.; Yu, Y.; Parspour, N.; Gauterin, F.; Goll, D.; Reuss, H.-C.; Albers, A.; Bause, K.
2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000164338

Investigation of scaled-down fuel cell system components by means of the IPEK X-in-the-loop approach
Seth, B.; Knaier, J.; Knecht, S.; Haußmann, J.
2023

Surrogate models for thermal optimization of an electro-hydrostatic actuator
Knecht, S.; Albers, A.
2023

Surrogate Models for Heat Transfer in Oscillating Flow with a Local Heat Source
Knecht, S.; Zdravkov, D.; Albers, A.
2023. Fluids, 8 (3), 80. doi:10.3390/fluids8030080

Strategische Planung des Entwicklungsrisikos gekoppelter CAE-Methoden = Strategic planning of the development risk of coupled CAE-methods
Albers, A.; Haberkern, P.; Holoch, J.; Joerger, A.; Knecht, S.; Renz, R.; Revfi, S.; Schulz, M.; Spadinger, M.
2022. Konstruktion, 74 (9), 72–77. doi:10.37544/0720-5953-2022-09-72

An approach to systematically reduce the extent of the design space in topology optimization for heat transfer problems
Knecht, S.; Albers, A.
2022. doi:10.5445/IR/1000161270

Design eines mechanischen Integrationskonzepts für ein modulares Brennstoffzellensystem unter Berücksichtigung von Anforderungen aus verschiedenen Anwendungsszenarien
Nowoseltschenko, K.; Knecht, S.; Bause, K.; Albers, A.
2022. FC3 Fuel Cell Conference Chemnitz. Hrsg.: D. Unwerth, 294–305

Approach to Support Frontloading in Product Development by Cross-Domain Simulation Models for the Prediction of System Performance under Consideration of Relevant Thermal Effects
Leitenberger, F.; Knecht, S.; Gwosch, T.; Albers, A.; Matthiesen, S.
2021. NAFEMS World Congress 2021

Thermal Simulation and Optimization of an Electro-Hydrostatic Actuator to reduce Component Temperatures
Knecht, S.; Albers, A.
2021. WCSMO 14: 14th World Congress of Structural and Multidisciplinary Optimization, 13-18. Juni 2021, 275