Dr.-Ing. Kai Wolter
- Wissenschaftlicher Mitarbeiter
- Sprechstunden: nach Vereinbarung
- Raum: R117
CS 50.33 - Tel.: +49 721 608-41868
- Fax: +49 721 608-45752
- kai wolter ∂does-not-exist.kit edu
Wissenschaftlicher Mitarbeiter
Forschungsgruppe Antriebssystemtechnik
Standort Fasanengarten
Kai Wolter M. Sc.
Forschungsgebiet
- Methoden und Prozesse in der Entwicklung von Antriebssystemen
- Modellbildung
- Reglersynthese
- Machine Learning und Signalanalyse
- Schaltroboter
- Schaltkomfort
Lehre
- Antriebssystemtechnik A und B
Bachelor- / Masterarbeiten
- Aktuelle Bachelor- und Masterarbeiten finden sie hier.
Publikationen
2023
Modellbasierte Regleroptimierung für erweiterte PID-Regler zur Drehzahlregelung von hochdynamischen PMSM im Prüfstandsbetrieb = Model-based controller optimization for advanced PID controllers for rotational speed control of highly dynamic PMSM in test bench operation. Dissertation
Wolter, K.
2023, Mai 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000157375
Wolter, K.
2023, Mai 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000157375
Development of a Validation Environment for a Hub Motor used in Light Mobility Solutions
Kern, J.; Wolter, K.; Bause, K.; Ott, S.
2023. Conference for Wind Power Drives and Drivetrain and Systems Engineering Conference (CWD 2023 and DSEC 2023)
Kern, J.; Wolter, K.; Bause, K.; Ott, S.
2023. Conference for Wind Power Drives and Drivetrain and Systems Engineering Conference (CWD 2023 and DSEC 2023)
2022
Model-Based Control Design of an EHA Position Control Based on Multicriteria Optimization
Dörr, M.; Leitenberger, F.; Wolter, K.; Matthiesen, S.; Gwosch, T.
2022. Machines, 10 (12), Art.-Nr.: 1190. doi:10.3390/machines10121190
Dörr, M.; Leitenberger, F.; Wolter, K.; Matthiesen, S.; Gwosch, T.
2022. Machines, 10 (12), Art.-Nr.: 1190. doi:10.3390/machines10121190
Validation of Fault-Tolerant Control of Converters under Open-Switch Faults on Connected Test Benches
Pecha, U.; Parspour, N.; Wolter, K.; Waschle, M.; Bause, K.
2022. IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON49645.2022.9968422
Pecha, U.; Parspour, N.; Wolter, K.; Waschle, M.; Bause, K.
2022. IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON49645.2022.9968422
Considering Functional Safety - supporting the development of automated driving vehicles by the use of Model-Based Systems Engineering
Wäschle, M.; Wolter, K.; Bause, K.; Behrendt, M.; Albers, A.
2022. 17th Annual System of Systems Engineering Conference (SOSE), Rochester, NY, USA, 07-11 June 2022, 275–280, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOSE55472.2022.9812686
Wäschle, M.; Wolter, K.; Bause, K.; Behrendt, M.; Albers, A.
2022. 17th Annual System of Systems Engineering Conference (SOSE), Rochester, NY, USA, 07-11 June 2022, 275–280, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOSE55472.2022.9812686
2021
Approach to Automated Testing by Combining Simulations and Bench Tests Conducted on an Electrohydraulic Actuator
Dörr, M.; Karam, M.; Wolter, K.; Leitenberger, F.; Gwosch, T.; Matthiesen, S.
2021. NAFEMS World Congress (NWC 2021)
Dörr, M.; Karam, M.; Wolter, K.; Leitenberger, F.; Gwosch, T.; Matthiesen, S.
2021. NAFEMS World Congress (NWC 2021)
Validation concept for scenario-based connected test benches of a highly automated vehicle
Wäschle, M.; Wolter, K.; Han, C.; Pecha, U.; Bause, K.; Behrendt, M.
2021. Automatisiertes Fahren 2021. Hrsg.: T. Bertram, 95–109, Springer Fachmedien Wiesbaden
Wäschle, M.; Wolter, K.; Han, C.; Pecha, U.; Bause, K.; Behrendt, M.
2021. Automatisiertes Fahren 2021. Hrsg.: T. Bertram, 95–109, Springer Fachmedien Wiesbaden
2020
A new safety oriented approach in the validation of highly automated electric vehicle subsystems
Wäschle, M.; Wolter, K.; Bause, K.; Behrendt, M.
2020
Wäschle, M.; Wolter, K.; Bause, K.; Behrendt, M.
2020
Model-Based Systems Engineering methods to support the reuse of knowledge within the development of validation environments
Mandel, C.; Wolter, K.; Bause, K.; Behrendt, M.; Hanf, M. M.; Albers, A.
2020. 14th Annual IEEE International Systems Conference (SysCon 2020),16. - 17.09.2020, Gera, Institute of Electrical and Electronics Engineers (IEEE)
Mandel, C.; Wolter, K.; Bause, K.; Behrendt, M.; Hanf, M. M.; Albers, A.
2020. 14th Annual IEEE International Systems Conference (SysCon 2020),16. - 17.09.2020, Gera, Institute of Electrical and Electronics Engineers (IEEE)
2018
Potential in customer-specific manual transmission development through the use of neural networks
Wolter, K.; Ruoff, S.; Lutz, S.; Bause, K.; Ott, S.
2018. 12th International Conference & Expo: Automotive Transmissions, HEV and EV Drives (CTI Symposium USA 2018), May 14-17, 2018, Novi, MI
Wolter, K.; Ruoff, S.; Lutz, S.; Bause, K.; Ott, S.
2018. 12th International Conference & Expo: Automotive Transmissions, HEV and EV Drives (CTI Symposium USA 2018), May 14-17, 2018, Novi, MI
2017
A new approach for the investigation of synchronizations by different shifting characteristics
Albers, A.; Reichert, U.; Wolter, K.; Pinner, T.; Ott, S.
2017. 17th International VDI Congress – Drivetrain for Vehicles, Bonn, Germnay, 5 - 6 July 2017, VDI Fachmedien
Albers, A.; Reichert, U.; Wolter, K.; Pinner, T.; Ott, S.
2017. 17th International VDI Congress – Drivetrain for Vehicles, Bonn, Germnay, 5 - 6 July 2017, VDI Fachmedien